2024-2026 Cupra Terramar SUV Infotainment system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment system for Your Cupra Terramar SUV First Generation (2024-2026)

Infotainment system
281
First steps
Infotainment system
First steps
Introduction
Infotainment functions and settings depend
on the country and equipment.
Before rst use
Before the rst use, bear in mind the following
points, to take full advantage of the functions
and settings oered:
●
Observe the basic safety warnings
›››page281.
●
Restore infotainment to factory settings.
●
Search and store favourite radio stations on
the preset buttons so you can tune them
quickly.
●
Use only suitable audio sources and data
media.
●
Pair a mobile phone to use phone manage-
ment through the Infotainment system.
●
Use up-to-date maps for navigation.
●
Register with CUPRA to execute the corre-
sponding services.
Current documentation attached
For using infotainment and its components,
take into account the following documenta-
tion, together with this instruction manual:
●
Supplements to your vehicle’s on-board
documentation.
●
Instruction Manual of the mobile phone de-
vice or audio sources.
●
Operating instructions for data media and
external players.
●
Manuals for the Infotainment accessories
subsequently installed or used additionally.
●
Description of services when running CUPRA
services.
Safety instructions
Some function areas may include links to third-
party websites. CUPRA is not the owner of the
third-party websites accessible through the
links, and assumes no liability for their content.
Some function areas may include outside in-
formation from third-party providers. CUPRA
is not responsible for such information being
correct, up-to-date or complete, or for ensur-
ing it does not infringe the rights of third par-
ties.
Radio stations and owners of data media and
audio sources are responsible for the informa-
tion they transmit.
Bear in mind that car parks, tunnels, tall build-
ings, mountains or the operation of other elec-
trical devices, such as chargers, can also inter-
fere with the reception of the radio signal.
Foils or adhesives with metallic layers on the
antenna and on the window panes can inter-
fere with radio reception.
WARNING
The infotainment central computer is inter-
connected with the control units mounted
on the vehicle. Therefore, there is a serious
danger of accident and injury if the central
computer is repaired or disassembled and re-
assembled incorrectly.
●
Never replace the central computer with
another one that is used, recycled or from
another vehicle at the end of its useful life.
●
The central computer should only be re-
paired or disassembled and reassembled at
specialised workshops. CUPRA recommends
going to a specialised CUPRA dealer or any
SEAT dealership for this purpose.
WARNING
Any distraction aecting the driver in any
way can lead to an accident and cause inju-
ries. Reading the information on the screen
and managing the infotainment system can
distract your attention from traic and cause
an accident.
●
Always drive with attention to traic and in
a responsible manner.
282
Infotainment system
WARNING
Connecting, inserting or removing an audio
source or data media while driving can dis-
tract your attention from the traic and
cause an accident.
WARNING
Select volume settings that allow you to
easily hear signals from outside the vehicle
at all times (e.g. emergency services sirens).
●
Hearing may be impaired if using too high a
volume setting, even if only for short periods
of time.
WARNING
The following circumstances may result in an
emergency call, phone call or data transmis-
sion not being made or being interrupted:
●
When in areas with zero or insuicient mo-
bile telephony or GPS signal. Also in tunnels,
conned areas between very tall buildings,
garages, underpasses, mountains and valleys.
●
When in areas with suicient mobile phone
or GPS signal, the telephony network of
the telecommunications provider has inter-
ference or is not available.
●
When the vehicle components necessary
to make emergency calls, phone calls and to
transmit data are damaged, do not work or
do not have suicient electrical power.
●
When the battery of the mobile phone de-
vice is discharged or its charge level is insui-
cient.
WARNING
In some countries and some telephone net-
works it is only possible to make an emer-
gency call, if a mobile telephone device is
connected to the telephone interface of the
vehicle, inside which there is an “unlocked”
SIM card with suicient balance to make calls
and with suicient network signal coverage.
WARNING
Read and observe the operating instructions
provided by the manufacturer in question
when using mobile phone devices, data me-
dia, external devices, external audio and
multimedia sources.
WARNING
Changing or connecting an audio or multi-
media source may cause sudden changes in
the volume.
●
Lower the volume before connecting or
switching to audio or multimedia sources.
WARNING
If mobile phone and radiocommunication
devices are used without connection to an
external antenna, the maximum electromag-
netic radiation levels inside the vehicle might
be surpassed, thus posing a risk to the health
of the driver and passengers. This is also the
case if the external antenna has not been
correctly installed.
●
Keep a distance of at least 20 centimetres
between the antennas of the mobile phone
device and an active medical device, such as
a pacemaker, as mobile phones might alter
the functioning of these devices.
●
Do not carry a switched-on mobile phone
too close or directly on top of an active medi-
cal device, for instance in a chest pocket.
●
Immediately turn o the mobile phone if
you suspect it is causing interferences in an
active medical device or any other medical
device.
WARNING
Mobile phones, external devices and acces-
sories that are loose or not properly secured
could move around the vehicle interior dur-
ing a sudden driving or braking manoeuvre or
an accident and cause damage or injury.
●
Place mobile phone devices, external devi-
ces and their accessories outside the airbag
deployment areas or store them securely.
Infotainment system
283
First steps
●
Position the connection cables of the au-
dio sources and external devices so that they
do not interfere with the driver.
WARNING
The centre armrest may obstruct the driver's
arm movements, which could cause an acci-
dent and severe injuries.
●
Keep the storage compartments of the
centre armrest closed at all times while the
vehicle is in motion.
WARNING
If the light conditions are not good and the
screen is damaged or dirty, the indications
and information displayed on the screen may
not be read or be read incorrectly.
●
The indications and information displayed
on the screen should never induce you to
take any risk that compromises safety. The
screen is not a replacement for driver aware-
ness.
WARNING
Radio stations can transmit disaster or haz-
ard announcements. The following condi-
tions prevent such notices from being re-
ceived or issued:
●
When in areas with zero or insuicient ra-
dio signal. Also in tunnels, conned areas
between very tall buildings, garages, under-
passes, mountains and valleys.
●
When the frequency bands of the radio
station have interference or are not available
in areas with suicient radio signal reception.
●
When the speakers and the vehicle compo-
nents necessary for radio reception are dam-
aged, do not work or do not have suicient
electrical power.
WARNING
Switch o mobile phone devices in areas with
a risk of explosion!
WARNING
The driving recommendations and traic in-
dications shown on the navigation system
may dier from the current traic situation.
●
Road signs, signalling systems, traic regu-
lations and local circumstances prevail over
driving recommendations and navigation
system indications.
●
Adapt your speed and driving style to
suit visibility, weather, road and traic condi-
tions.
●
Certain circumstances can signicantly
lengthen both the initially planned duration
of the trip and the route to the destination,
or even temporarily prevent navigation to it,
for example, if a road is closed to traic.
NOTICE
In areas where special regulations apply or
the use of mobile phones is forbidden, the
mobile device in question must be switched
o at all times. The radiation produced by a
mobile phone device when switched on may
interfere with sensitive technical and medical
equipment, possibly resulting in malfunction
or damage to the equipment.
NOTICE
If the playback volume is excessive or distor-
ted, the speakers may be damaged.
284
Infotainment system
Overview and controls
Connect System
Fig.176 Overview: control unit
1
HOME button
: main menu with widget
views.
2
MENU button
: main menu in tile mode.
3
Touch screen. The infotainment functions
can be used through the screen.
4
On/O touchpad (to turn the infotain-
ment system on/o).
5
Touch zones (to raise and lower the air
conditioning temperature).
6
Touch zones (to raise and lower the vol-
ume).
Infotainment system
285
General instructions for use
General instructions for
use
Operating indications
●
The infotainment system needs a few sec-
onds to start up completely and during that
time it does not react to inputs. Only the im-
age of the rear view camera system can be dis-
played during system start-up.
●
The display of all indications and the execu-
tion of functions only takes place once the in-
fotainment system has nished booting. The
duration of the system boot depends on the
number of infotainment functions and may
take longer than normal in the event of very
high or very low temperatures.
●
When using the infotainment system and
corresponding accessories, e.g., headphones,
bear in mind country-specic regulations and
legal provisions.
●
Some functions of the infotainment system
require an active CUPRA CONNECT user ac-
count and an Internet connection for the vehi-
cle. Data transmission must not be limited for
functions to be performed.
●
To use the infotainment system, simply lightly
press a button or touch the screen.
●
For the correct operation of the infotain-
ment system it is important that it is switched
on and that, if necessary, the time and date of
the vehicle are set correctly.
●
If a function button is missing on the screen,
it is not a device defect, but corresponds to the
specic equipment of the country or version.
●
Some infotainment functions can only be se-
lected when the vehicle is at a standstill. In
some countries the parking lock must also be
enabled (button P ) or the selector control
must be in the neutral position N. This is not
a malfunction, but is due to compliance with
legislation.
●
Restrictions on the use of devices using
Bluetooth® technology may apply in some
countries. For further information, contact the
local authorities.
●
If you disconnect the 12-volt battery, turn on
the ignition before restarting the infotainment
system.
●
If the setup is changed, this may change the
display on the screen and in some cases, the
infotainment system may behave in a manner
dierent to that described in this instruction
manual.
●
In some countries, the infotainment system
automatically shuts o when the engine is
switched o and the vehicle's 12-volt battery
charge level is low.
●
Ensure that any repairs or modications that
need to be carried out on the infotainment
system are carried out by a specialised work-
shop. CUPRA recommends going to a special-
ised CUPRA dealer or any SEAT dealership for
this purpose.
●
Using a mobile phone device inside the vehi-
cle may cause noise in the speakers.
●
On vehicles with park assist, the audio
source volume is automatically lowered when
reverse gear is selected. The volume reduction
can be adjusted.
●
Information about the included software and
the license conditions can be found in Set-
tings > Information > Copyright.
●
When selling or lending the vehicle, make
sure that all saved data, les and settings have
been deleted and, if necessary, external audio
sources and data media have been removed.
Note
You can nd more information and tips for
using the infotainment system in the Help
menu.
Home screen
If an icon is missing on the screen, it is not a
device defect, but corresponds to the specic
equipment of the country or version.
The following menus can be included as an
icon:
Main menus
Vehicle ›››page39
Navigation ›››page300
286
Infotainment system
Radio ›››page293, Media ›››page297
Telephone ›››page307
Full Link ›››page276
Load ›››page91
Drive Prole ›››page185
Seats ›››page151
CUPRA Assistant ›››page290
Stationary air conditioning ›››page158
Vehicle lights ›››page138
Settings ›››page287
Sound
Users
Store
Legal.
Help
Managing the infotainment system
Execute the functions and settings with the in-
fotainment controls.
Depending on the equipment, the infotain-
ment system has dierent controls:
●
Touch screen.
●
Touch zones outside the screen, for exam-
ple, Volume (+ -).
Open the Quick Guide
More information and operating tips can be
found in the Infotainment Quick Guide.
●
Press MENU > Help.
Connecting and disconnecting the infotain-
ment system
The infotainment system turns on when the
ignition is switched on, unless it has been man-
ually turned o beforehand.
The infotainment system starts-up with the last
set volume, provided that this does not exceed
the preset maximum start-up volume.
The infotainment system automatically turns
o when the driver's door is opened, provided
the ignition has been switched o beforehand.
Moving objects and adjusting volume
Move objects on the screen to adapt settings,
for example, with scrollable buttons or to move
the areas of a menu.
Depending on the equipment, menus and dis-
plays can be customised.
Zooming into and out of images or map sizes
Tip: use your thumb and index nger.
●
Press on the map with both ngers at the
same time and leave them on the screen.
●
To enlarge views, slowly separate one nger
from the other. To reduce views, slowly bring
one nger towards the other.
Note
If you turn on the infotainment system man-
ually with the ignition o, it will automatically
turn o after about 30 minutes.
Note
As with most state-of-the-art computer
and electronic equipment, in certain cases
the system may need to be rebooted to
make sure that it operates correctly. To
do this, if appropriate, press and hold the
On/O button of the infotainment system (
›››
page284) for approx. 15 seconds until
the CUPRA logo appears on the display.
Infotainment system
287
General instructions for use
Customising the infotainment sys-
tem
Customise the top menu or the HOME
›››
Fig.176
1
view to quickly access your
favourite or most frequently used functions.
The main menu contains function buttons for
accessing all of the Infotainment apps.
Conguring customised menus
At the top of the screen you will nd short-
cuts to customisable system functions. Use the
settings to delete or replace them, or change
their order.
●
Press and hold one of the icons (or press on
the icon of an empty position) to display an
additional window.
●
Select one of the icons from the apps bar.
●
Click on the three dots and then Delete fa-
vourite to delete an icon.
●
Click on an icon in the additional window to
replace the value.
●
To close the edit mode, press Finish in the
additional window.
Settings (system and sound)
The selection of possible settings varies de-
pending on the country, the equipment in
question and the equipment of the vehicle.
Modifying settings
The meaning of the following symbols are valid
for all system and sound settings.
All changes are automatically applied when the
menus are closed.
/
The setting is selected and activa-
ted or connected.
/
The setting is not selected, disa-
bled or disconnected.
To open a drop-down list.
To increase a setting value.
To reduce a setting value.
To go back step by step.
To go forward step by step.
To change a setting value with
the scrollable button without ad-
justing.
Sound settings
●
Access the sound settings: > .
In the sound settings there may be the follow-
ing functions, information and setting options:
●
Equaliser.
●
Position.
●
Settings.
System settings
●
Access the system settings: > .
In the system settings there may be the follow-
ing functions, information and setting options:
●
Screen.
●
Time and date.
●
Language.
●
Additional keypad languages.
●
Units.
●
Voice control.
●
Wi-Fi.
●
Data connection.
●
Manage mobile devices.
●
Reset factory settings.
●
System information.
●
Copyright.
●
Conguration wizard.
Adjust the volume of external audio sources
If you need to increase the playback volume
for the external audio source, rst lower the
volume on the infotainment system.
If the sound from the connected audio source
is very low, increase the output volume on
the external audio source. If this is not enough,
change the input volume to medium or high.
288
Infotainment system
1)
Equipment name: Connect System
If the sound from the connected external au-
dio source is too loud or distorted, lower the
output volume on the external audio source.
If this is not enough, change the input volume
to medium or low.
Clean the screen
Remove persistent dirt carefully and without
using aggressive cleaning products. To clean
the screen we recommend that:
●
The infotainment system is switched o.
●
Use a clean, soft cloth dampened with water
›››page394.
●
In case of persistent dirt: soften the dirt by
moistening with a little water. Then carefully
remove with a clean, soft cloth.
NOTICE
Cleaning the screen with inappropriate
cleaning products or when dry, may damage
it.
●
When cleaning, only press lightly.
●
Do not use cleaning products that are ag-
gressive or contain solvents. Such products
may damage the equipment and darken the
screen.
Trademarks, licenses and copy-
rights
Registered trademarks and licenses
Certain terms in this manual bear the symbol
® or ™. These symbols indicate that they are
trademarks or registered trademarks. The ab-
sence of this symbol, however, does not nec-
essarily mean that the term in question can be
used freely.
Other product names are registered trade-
marks of the respective rights holders.
●
Manufactured under license from Dolby Lab-
oratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
●
Manufactured under license from Dolby Lab-
oratories. Dolby, Pro Logic and the double-D
symbol are trademarks of Dolby Laboratories.
●
Android Auto™ is a trademark of Google Inc.
●
Apple CarPlay™ is a trademark of Apple Inc.
●
Bluetooth® is a registered trademark of Blue-
tooth® SIG, Inc.
●
iPod®, iPad®, and iPhone® are trademarks of
Apple Inc.
●
Windows® is a registered trademark of Mi-
crosoft Corporation, Redmond, USA.
●
MPEG-4 HE-AAC audio coding technology
and patents are licensed by Fraunhofer IIS.
●
This product is protected by certain Micro-
soft Corporation industrial and intellectual
property rights. The use or commercialization
of technology of this type outside the congu-
ration of this product, without a licence from
Microsoft or an authorised Microsoft branch is
prohibited.
Copyright
As a general rule, audio and video les stored
on data media and audio sources are subject
to intellectual property protection in accord-
ance with the national and international provi-
sions applicable in each case. Please bear in
mind all legal provisions!
Technical data
Central computer with control and display
unit
1)
The factory-mounted central computer in the
vehicle includes country-specic components
and software for connectivity and for the ex-
ecution of vehicle, comfort and infotainment
functions.
The corresponding indications are shown on
the control and display unit screen and partly
on the instrument cluster.
Infotainment system
289
General instructions for use
●
Capacitive colour screen
●
Using the equipment with:
–
Touch zones. Touch operation.
–
Buttons on the multifunction steering
wheel.
–
Proximity sensors and gesture control.
HOME > Settings > Display.
Vehicle and comfort functions
●
Assistants system settings.
●
Heating and air conditioning settings.
●
Lights and visibility function settings.
●
Vehicle comfort settings.
●
Parking and manoeuvring settings.
Note
Setting navigation routes and other func-
tions requiring the vehicle’s location will be
more eicient if you activate the privacy set-
tings to share your location ›››page274
and if you give your consent in the App on
your mobile device for it to share your loca-
tion data.
Sound system (basic equipment):
The factory-tted entertainment system is
equipped as follows:
●
Speakers in dierent locations and with dif-
ferent power levels (watts).
●
Internal amplier depending on the system:
–
8 speakers (without eCall): 4x20.
–
9 speakers (with eCall): 5x20.
Setting options:
●
Equaliser, depending on the system:
–
9 speakers: 5 frequency bands and default
settings.
●
Sound distribution, depending on the sys-
tem:
–
9 speakers: Balance + Fader (left / right /
front / rear).
●
Sound optimisation by zones (valid for the
9-speaker system):
–
Manual (Driver and All).
–
Automatic depending on the seats occu-
pied.
Optional sound system
The infotainment system can be extended with
an optional sound system as follows:
●
12 speakers in dierent locations and with
dierent power levels (watts).
●
External amplier (365 W Ethernet), which
processes the audible signals sent by the cen-
tral computer.
●
Excitation of speaker channels through class
AB nal stages.
●
Audio signal processing in digital internal sig-
nal processor (DSP).
●
Independent subwoofer in the luggage com-
partment.
Setting options:
●
Equaliser: 3 preset sound modes and 1 user-
customisable 6-band equaliser. With “Immer-
sion®” surround sound control in any of the
modes.
●
Sound distribution: Balance (left / right) +
Fader (front / rear).
●
Sound optimisation by zones:
–
Manual (Driver, Front and All).
–
Automatic depending on the seats occu-
pied.
●
Subwoofer volume.
Wi-Fi
●
Wi-Fi compliant with IEEE 802.11b/g/n/ax
and IEEE 802.11a/n/ac/ax
●
Transfer at 2.4 GHz and 5 GHz.
●
Apple CarPlay™ and Android Auto™ over Wi-
Fi.
290
Infotainment system
1)
Not available in all markets.
●
Simultaneous connection of up to 8 Wi-Fi
devices.
●
Two Wi-Fi modes at the same time:
–
Access point.
●
Internet connection through Wi-Fi:
–
Tethering through the customer's phone.
–
Customer access point (clients) in the ve-
hicle.
●
Pairing process simplied with QR code.
Bluetooth® proles
There can be a maximum of two mobile devi-
ces connected to the Bluetooth® hands-free
and a third device connected to the Blue-
tooth® as a music player.
When a mobile phone is connected to the tel-
ephone management system, a data exchange
takes place via one of the Bluetooth® proles.
●
Hands-free telephone prole (HFP): the
HFP can be used to manage calls through the
infotainment system.
●
Audio prole (A2DP): This prole allows au-
dio to be transmitted with stereo quality. Other
proles may need to be connected for manag-
ing and controlling playback.
●
Phone book access prole (PBAP): Allows
phone book contents to be downloaded from
the mobile telephone.
●
Messaging prole (MAP): It allows short
messages (SMS) and emails to be downloaded
and synchronised.
CUPRA Assistant
Introduction
Note
The CUPRA Assistant function is not available
in all markets.
The CUPRA Assistant works both online
1)
and
oline, taking into account the aspects indica-
ted in the section “Languages available de-
pending on the market”.
In oline mode the catalogue of voice controls
is limited. For a better user experience, it is
advisable to use the online mode by activating
the online voice assistant via the My CUPRA
App, which provides the user with a wider
range of voice controls. In addition, ChatGPT
is also available to answer questions.
The CUPRA Assistant understands questions
and expressions without having to learn com-
mands. Commands can be freely formulated
and can be colloquial. For better system oper-
ation, it is recommended to always include a
verb in the voice control. Command proposals
can be found in the infotainment system, for
example in the MENU
> CUPRA Assistant >
Tips menu.
Loud noises inside or outside the vehicle can
cause malfunctions, as well as confusing phra-
ses and answers.
Seat-dependent speech recognition
Thanks to additional microphones, the CUPRA
Assistant can recognise whether the person
speaking is the driver or the passenger. There-
fore, in the case of the available languages, you
can access functions for a specic seat, such
as switching on the seat heating.
Languages available depending on the mar-
ket
●
Online and oline: German, American Eng-
lish, British English, French, Italian, Spanish,
Czech, Dutch, Polish, Portuguese, Swedish,
Danish and Norwegian. These languages have
advanced functions such as Online Com-
mands, air conditioning control, natural inter-
action, etc.
●
Oline: Finnish, Mexican Spanish.
The other languages of the infotainment sys-
tem (e.g. Greek, Russian, Turkish, Bulgarian)
have no natural interaction.
Infotainment system
291
CUPRA Assistant
Requirements
●
Oline: voice control with the corresponding
infotainment installed in the vehicle.
●
Online and oline: voice control with the
corresponding infotainment system installed in
the vehicle and an active CUPRA CONNECT
contract.
Note
●
The CUPRA Assistant only recognises com-
mands in the language set in the infotain-
ment system.
●
Test the CUPRA Assistant while the vehicle
is stopped, before moving o, to familiarise
yourself with its operation.
●
The CUPRA Assistant can only control
functions that are available as part of the ve-
hicle’s equipment.
Activation word and commands
Activation word for the CUPRA Assistant
The CUPRA Assistant starts when the infotain-
ment recognises the activation word.
If you have started the CUPRA Assistant via the
activation word, the activated infotainment will
play an audible tone as it is listening to you and
display the avatar next to the teleprompter.
●
OR: after the wake word, say the desired
command, for example: “Hello CUPRA” and
then “Switch on heating”.
The system scans the words spoken in the
vehicle after the activation work and displays
them on the screen.
Activate and deactivate the activation word
●
Tap MENU > CUPRA Assistant > Activation.
Activation word:
Spanish Hola CUPRA
Bulgarian Здравей CUPRA
Czech Ahoj CUPRA
German Hallo CUPRA
Danish Hej CUPRA
French Bonjour CUPRA
Finnish Hei CUPRA
English Hey CUPRA
Greek Γεια σου CUPRA
Italian Ciao CUPRA
Norwegian Hallo CUPRA
Dutch Hallo CUPRA
Portuguese Olá CUPRA
Polish Cześć CUPRA
Russian Привет CUPRA
Swedish Hej CUPRA
Turkish Merhaba CUPRA
The activation word can be personalised by the
user via the microphone or keypad.
Commands
To help the voice control recognise commands
reliably:
●
Pronounce clearly. Confusing commands are
not recognised. Speak in a normal tone of
voice. Speak a little louder if you are driving at
high speed.
●
Avoid outside noises. Open windows and
doors can interfere with voice control.
●
Avoid other secondary noises, such as con-
versations in the vehicle. Do not direct the air
ow from the outlets towards the microphone
or the interior lining of the roof.
●
Do not make long pauses.
Voice control is active and recogni-
ses the words pronounced.
Open the command proposals
●
Tap MENU > CUPRA Assistant.
292
Infotainment system
Note
●
If the activation word is switched o, the
CUPRA Assistant cannot be activated via the
activation word. The CUPRA Assistant is still
available via the
button on the multifunc-
tion steering wheel. You can deactivate the
activation word in MENU > CUPRA Assistant >
Activation.
●
Availability depends on country and equip-
ment.
Starting and ending the CUPRA As-
sistant
Depending on the equipment, you can start
voice control in dierent ways.
Starting the CUPRA Assistant
●
Activating the CUPRA Assistant: say the word
that activates the CUPRA Assistant.
●
Multifunction steering wheel: press the voice
control button .
In some cases you can also start the voice
assistant of the connected mobile device by
pressing and holding down the voice control
button.
Ending the CUPRA Assistant manually
The CUPRA Assistant can be cancelled using
the command Cancel.
●
Multifunction steering wheel: tap the voice
control button once to end the assistant.
CUPRA Assistant is automatically terminated if
you use infotainment functions, if the parking
system is activated, if there is an incoming call
or a long pause or silence.
Infotainment system
293
Radio mode
1)
Not available in all markets.
Radio mode
Introduction
Fig.177 Schematic representation: Radio
view.
In Radio mode you can tune in the available
radio stations in dierent frequency bands and
save your favourites on the preset buttons to
access them quickly.
The types of reception and frequency bands
available depend on the equipment and the
country. In certain countries, frequency bands
may stop broadcasting or may no longer be
available.
Access the RADIO menu
●
Press MENU > > ›››Fig.177.
Access the settings
●
Press MENU > > .
Online functions in Radio mode
1)
Online functions in Radio mode are only availa-
ble under the following conditions:
●
CUPRA CONNECT equipment.
●
You have an active CUPRA CONNECT user
account.
●
The vehicle is assigned to your user account.
●
You have a corresponding data plan pur-
chased from the webshop of CUPRA's oicial
data supplier, or you have a volume of data for
your own mobile device via the Wi-Fi hotspot.
Note
●
Radio stations are responsible for the con-
tent of the information they transmit. Electri-
cal equipment connected to the vehicle may
also cause interference in radio signal recep-
tion and noise in the loudspeakers.
294
Infotainment system
1)
Not available in all markets.
AM
FM/DAB
Internet radio
TP
●
Foil or metal-coated stickers attached to
the windows may aect reception on vehi-
cles with a window aerial.
Radio equipment and symbols
The functions, as well as the types of reception
and frequency bands available depend on the
equipment and the country.
●
AM tuner.
●
Dual FM receiver (diversity antenna).
●
Summarised FM station list.
●
Merger of DAB and FM stations into one list.
●
Merger of all stations stored in preset buttons
into one list. Maximum 36 favourite stations.
●
Station logos.
●
DAB presentation (slideshow). Images that
are emitted sequentially.
●
Internet Radio: over 10,000 stations and
podcasts from around the world, included with
CUPRA CONNECT.
Universal symbols in Radio mode
To select the desired AM frequency band
1)
.
To select the desired FM/DAB fre-
quency band.
To select the type of Internet
radio reception.
Next to the name of the station, monitor-
ing of active traic information stations
(TP).
Symbols on the FM/DAB frequency band
To display the frequency band for manual
selection of the FM frequency. Only the
FM band should be selected in the Radio
context.
DAB not available.
DAB stations support presentations (slide-
show).
Symbols on the AM frequency band
1)
Manually updating the station list.
To display the frequency band for manual
selection of the AM frequency.
Menus in Internet radio mode
1)
Show station selection.
Open text search.
Show the last online radio stations heard.
Show the 100 most played radio stations
and podcasts.
Show available online radio podcasts.
Show online radio stations, grouped by
country.
Show online radio stations by the desired
language.
Show online radio stations whose pro-
gramme has the the desired musical
genre.
Selecting, tuning and saving a sta-
tion
Select the frequency band
Before selecting a station you have to select
a frequency band or a type of reception. Dif-
ferent stations are available depending on the
frequency band selected or the type of recep-
tion.
The types of reception and frequency bands
available depend on the equipment and the
country.
●
Select the frequency band or type of recep-
tion: AM, FM/DAB, FM (for devices that do not
have DAB), Internet radio.
Search and select a station
You can select radio stations in dierent ways.
The options vary depending on the frequency
band and the type of reception.
Infotainment system
295
Radio mode
Select via the frequency band (AM and FM)
1. Activate the frequency band.
2. Click on the cursor, scroll through the fre-
quency band and release it when you reach
the frequency band you want.
OR: press on a point on the frequency
band. The cursor will automatically jump to
the corresponding frequency.
The station of the set frequency is tuned.
Select from the station list (AM and FM/DAB)
The station list shows the stations that are cur-
rently tunable. In the AM frequency band, you
may have to update the station list if you are no
longer in the area where you last accessed the
station list. In the FM/DAB frequency band, the
station list is automatically updated.
1. Open the station list
2. Press the station you want.
The selected station is tuned. In the case of
FM/DAB and if the station is available, the best
quality reception is automatically selected.
Search and lter stations (Internet radio)
In Online Radio mode, stations can be ltered
by categories and can be searched by text.
1. Open the station list.
2. Select the category by which the stations
are to be ltered.
OR: press to start the text search. The
input eld is displayed.
3. Enter the name of the station you want.
The list of the stations found is updated
while entering the text.
4. Press the station you want.
The selected station is tuned.
Save stations on the preset keys
You can store up to 36 stations of dierent fre-
quency bands and reception types as favour-
ites using the preset buttons.
1. Tune the station you want.
2. Access the preset buttons.
3. Press the preset button and hold it down
until the station is stored.
OR: press the station on the station list and
hold it down. The preset buttons are dis-
played.
4. Press the preset button.
The station is stored in the selected preset
button.
If a station was already stored in the preset but-
ton, it is overwritten with the new station.
Special functions in Radio mode
Traic information (TP)
The TP function monitors the announcements
of a station with traic information and auto-
matically plays them in the Radio mode or in
the multimedia playback that is active. To do
this, you have to be able to tune into a station
with traic information.
Some stations without their own traic in-
formation support the TP function by broad-
casting traic information from other stations
(EON).
In the FM frequency band or in the Multimedia
mode, a station with traic information in the
background is automatically tuned while it is
possible to tune into a station with traic infor-
mation.
If no station with traic information can be
tuned in, the device automatically searches for
stations with tunable traic information.
Stations with traic information are not availa-
ble in all countries.
Activating and deactivating the TP func-
tion
●
In Radio mode or Multimedia mode, press
> Traic programme (TP).
296
Infotainment system
1)
Not available in all markets.
Presentations (SlideShow) in DAB
The slideshow function (SLS) is a feature of
digital radio (DAB) stations, allowing a slide-
show of images, e.g. the station’s logo, to be
displayed to the user.
Activating and deactivating the SLS func-
tion
It is possible to deactivate the slideshow func-
tion on DAB radio stations:
●
Menu > Slide Show (switch on/o).
Online radio.
1)
Online radio is a type of reception for Internet
radio stations and podcasts that are independ-
ent of AM, FM and DAB. Thanks to Internet
transmission, reception is not limited to the re-
gion.
Internet radio is only available with CUPRA
CONNECT online services activated and online
mode active. The use of online radio may not
be free of charge due to the transmission of
data from the Internet.
●
In Online radio mode, press and set the au-
dio quality to high or low to tune the online
radio.
Station logos
In the case of some frequency bands, station
logos may already be pre-installed in the info-
tainment system.
If in the FM/DAB frequency band settings the
automatic selection of station logos is activa-
ted, station logos are automatically assigned to
the stations.
In the Online radio mode, the infotainment
system accesses the station logos of the on-
line database and automatically assigns them
to the stations.
Assign station logos manually
1. In FM/DAB mode, press Station logos.
2. Press on the
icon and then select the
station to which a station logo is to be as-
signed.
3. Select the station logo. If desired, repeat
the same process with other stations.
4. OR: via the menu > Station logos.
Additional DAB warnings
The DAB announcement function monitors
possible notications from DAB radio stations
and plays them automatically in Radio mode.
Activate and deactivate additional DAB
warnings:
●
Menu > Additional DAB announcements
(Activate/deactivate).
Radio text
The radio text function provides information
related to the selected radio station.
Activate and deactivate Radio text:
●
Menu > Radio Text (Activate/deactivate).
Infotainment system
297
Media Mode
Media Mode
Introduction
Fig.178 Schematic representation: Media
view
In Media mode you can play multimedia les
from data media through the infotainment sys-
tem.
Depending on the equipment, the following
data media can be used:
●
USB storage support (for example, a USB
stick, a mobile phone connected via USB).
●
Bluetooth® device (for example, a mobile
phone or a tablet).
Depending on the equipment, the following
types of multimedia les can be played:
●
Audio les.
●
Video les (depends on the system).
Access the MEDIA menu
●
Press MENU > > ›››Fig.178.
Access the settings
●
Press MENU > > .
Data media limitations and indications
Data media may not work if they have been
exposed to high temperatures or have been
damaged. Please bear in mind the manufac-
turer’s indications.
Quality dierences between data media pro-
duced by dierent manufacturers can cause
multimedia playback malfunctions.
Incorrect data media conguration may make
it unreadable.
Playlists only specify a playback order and refer
to the storage location of the multimedia les
within the folder structure. No multimedia les
are saved in a playlist. To play a playlist, mul-
timedia les have to be found in the storage
places of the data media to which the playlist
refers.
298
Infotainment system
Note
CUPRA assumes no liability for any deteriora-
tion or loss of les on data storage devices.
Equipment features and media
symbols
Audio, multimedia and connectivity:
●
Media playback and control via Bluetooth®.
●
Audio playback in these formats: AAC, APE,
ALAC, FLAC, MP2, MP3, MP4, Vorbis, OPUS,
WMA, WAV.
●
Video playback in these formats:
–
MPEG-1 and MPEG-2
(.mpg, .mpeg, .mkv, .avi).
–
ISO MPEG-4 ASP; Xvid
(.mp4, .m4v, .mov, .mkv, .avi).
–
ISO MPEG-4 AVC / H.264
(.mp4, .m4v, .mov, .mkv, .avi).
–
Windows Media Video 9
(.wmv, .asf, .mkv, .avi).
●
Playlists on any type of device.
●
Multimedia search.
Universal symbols in Media mode
Start playback.
Pause playback.
Change to the previous track.
Change to the next track.
Repeat the track that is playing.
Repeat all titles.
Activate the shule playback order.
Display a list of favourites.
Add a media le as favourite.
Top right: select media source.
Access the settings.
Open the search.
Return to the top folder of the media
source.
Select and play a multimedia
source
Select multimedia source
Before playing multimedia les you must rst
connect a multimedia source.
●
Connect an external multimedia source.
●
Select the connected media source to be
used for playback.
Playing audio and video les
You can search and play multimedia les from
an available multimedia source in dierent
ways.
Search in the folder structure
Multimedia les can be catalogued by catego-
ries (for example, album, artist, title). In My
media this category view is always displayed.
The classic folder structure of individual USB
data media is also found in My media.
1. Activate the folder structure.
The folder structure of the selected multi-
media source is displayed. When My media
is selected, the categories (music, videos,
playlists) and connected multimedia sour-
ces are displayed rst.
2. Search for the title you want in the folder
structure.
OR: press
to start a text search The in-
put eld is displayed.
3. Enter the name of the desired title. The list
of the titles found is updated while entering
the text.
4. Press the desired title.
If at the beginning of the playback your se-
lection is in a folder of a multimedia source,
the multimedia les that are in it are also
added to the playback.
If a playlist is played, all available titles in the
playlist are added to the playback.
5. Close your selection with
.
Select favourites
In favourites you can save titles, music genres,
artists and albums individually for playback.
Infotainment system
299
Media Mode
●
Access favourites .
●
Press the favourite you want.
Depending on your selection, all the titles be-
longing to the favourite are added to the play-
back.
Save favourites
Only multimedia les in My media of the info-
tainment system can be saved as favourites.
You can save up to a maximum of 36 titles,
albums, artists and music genres individually as
favourites.
1. Start playback.
2. Access favourites.
3. Tap a favourite that is not assigned.
OR: press and hold on an existing favourite
for approx. 3 seconds.
4. Select from the selection list: Title, Album,
Artist, Genres, Playlist.
The selection is saved instead of the previ-
ously selected favourite. If the favourite was al-
ready assigned, the previously saved favourite
is overwritten.
The selectable options in the selection list de-
pend on the data attached to the multimedia
le. If the music genre is not indicated in the
music les, for example, you cannot save the
music genre as favourite.
If a video le is playing, only that video can be
saved as favourite.
Playing entertainment content in
the infotainment system
Depending on the infotainment system, videos
can be played.
Video mode
When in Video mode, a video stored on data
media, in My media can be played on the info-
tainment display. In this case, the video sound
is played through the vehicle's speakers.
The image is only displayed if the vehicle is
stopped. When the vehicle is in motion, the in-
fotainment screen turns o. The sound of the
video can still be heard.
300
Infotainment system
Navigation
Introduction
Fig.179 Schematic representation: Navigation
view.
Note
The “Navigation” function is not available in
all markets.
A global satellite system determines the cur-
rent position of the vehicle and the sensors
mounted on the vehicle analyse the routes
taken. All measured values and possible traic
events are compared with the available maps
to allow optimal navigation to the destination.
Navigation announcements and graphic repre-
sentations will guide you to your destination.
Navigation is managed on the screen.
Depending on the country, some functions of
the infotainment system will not be available
on the screen when travelling above a certain
speed. It is not a malfunction, but is due to
compliance with legislation.
Navigation announcements
Navigation announcements audible indica-
tions for driving relating to the current route.
The type and frequency of navigation an-
nouncements depend on the driving situation,
for example, starting the guide to the destina-
tion, driving on the motorway or on a round-
about and the settings.
If the exact destination cannot be reached be-
cause, for example, it is in a non-digitised area,
indications relating to the address and the dis-
tance to the destination are displayed on the
screen.
During dynamic route guidance, you will re-
ceive information about reported traic con-
gestion on the route. An additional navigation
announcement is given if the route is recalcu-
lated due to traic congestion.
While a navigation announcement is playing,
its volume can be adjusted. Subsequent navi-
gation announcements will be played with the
newly adjusted volume.
302
Infotainment system
1)
Not available in all markets.
Functions
●
Entering the destination and route calcula-
tion (oline and online.
1)
)
●
Display of two navigation maps at the same
time (screen and instrument cluster).
●
Update of online maps.
1)
●
Predictive navigation.
●
3D urban maps.
●
Online traic information.
1)
●
Dynamic POIs (points of interest).
Symbols on the map
The buttons and indications depend on the
settings and the current driving situation.
Symbols for traic events and points of inter-
est (POIs) are displayed on the map, for exam-
ple, petrol stations, train stations or interesting
stopovers, provided navigation has such data
›››page305.
Current position.
Search for destinations.
Destinations along the route.
Final destination.
Home address.
Work address.
Favourite destinations.
Additional window with route options.
Centre the map on the current position.
Change view: 2D oriented to the north,
or 2D oriented to the direction of travel,
or 3D to the direction of travel.
Information about the current route guid-
ance.
Map scale.
Other symbols
Entering the detailed destination for an
address.
Search for destinations.
Back
Symbols in the route details
Current position.
Destination of the current guidance.
POI symbols (points of interest)
POIs (points of interest) are shown on the map,
provided the navigation has said data.
Click on the desired POI (point of interest) to
start route guidance ›››
page303.
Petrol station.
Car park.
Tourist information oices.
Train station.
Restaurant.
Traic information.
POIs (points of interest) are shown on the
map, provided the navigation has said data
›››
page305.
Click on a traic event to open an additional
window with further details ›››page305.
Slow traic.
Traic jam.
Accident.
Broken down vehicle.
Slippery surface (ice or snow).
Road closed to traic.
Slippery road hazard.
Danger.
Road works.
Strong wind.
Infotainment system
303
Navigation
1)
Not available in all markets.
Reduced visibility.
Navigation data
The Infotainment system is equipped with a
built-in navigation data memory. Depending
on the country, the necessary navigation data
may already be pre-installed.
To provide correct route guidance and make
the most of the functions oered, the infotain-
ment system should be updated on a regular
basis.
Using obsolete data may lead to errors during
navigation. Current routes cannot be traced or
the route guidances will lead to mistaken desti-
nations.
Ensure navigation data is updated at all times.
Online updating of navigation data
1)
The navigation data of the regions through
which you travel frequently is automatically up-
dated in the background if the Internet con-
nection is established and the privacy settings
are valid.
●
With the ignition switched on, the navigation
data is updated automatically.
Manual update of navigation data
Current navigation data for large regions, for
example Western Europe, can be downloaded
from and stored on USB data
devices.
●
Download the navigation data to a USB data
device.
●
Turn on the ignition of the vehicle.
●
Connect the USB data device to the infotain-
ment system. Navigation data is automatically
updated in the background.
The map version is displayed in HOME > >
System information.
Note
Automatic update of the navigation data is
subject to the privacy settings. No update is
made in incognito mode.
Start route guidance
Depending on the country and equipment, dif-
ferent functions are available to enter destina-
tions.
The dierent functions for entering destina-
tions are found in the navigation main menu.
Opening the Navigation main menu
●
Press MENU > .
Select the destination and start navigation
1. Press .
2. Select the desired destination. You can
chose from Suggestions, Recent destina-
tions and Favourite destinations.
OR: press and enter the address in the
input screen.
OR: detailed address.
3. Press Start.
Suggestions
The destination synopsis uses recorded data to
propose possible destinations.
Select the destination and start navigation:
1. Tap and then Suggestions.
2. Select the desired destination. The route
guidance starts automatically.
Quick start: for a quick start, press and hold
the desired destination for a few seconds.
Recent destinations
Navigation saves the recent destinations to
make them available for route guidance.
304
Infotainment system
Select the destination and start navigation:
1. Tap and then Recent destinations.
2. Press the desired destination.
3. Press Start.
Quick start: for a quick start, press and hold
the desired destination for a few seconds.
Favourite destinations
Save up to 20 destinations as favourites.
To save a destination as a favourite press in
the split screen when entering the destination.
Select the destination and start navigation:
1. Tap and then Favourites.
2. Press the desired destination.
3. Press Start.
Note
Enter the destination as accurately as possi-
ble. If you enter a destination incorrectly, the
route guidance will not be able to start or it
will guide you to an incorrect destination.
Start route guidance by selecting from the
map
The navigation map includes active areas at
many points that are suitable for entering the
destination. To do this, press the desired posi-
tion or place on the map. If there is map data at
this point, you can start route guidance.
Whether it is possible to enter the destination
through the navigation map depends on the
state of the data and it is not possible for all
positions.
To start “oroad navigation”, press an empty
area without position data.
Start navigation:
1. Press .
2. Move the view on the map until the desired
position can be selected. The navigation
map can be used by means of additional
nger movements ›››page300.
3. Press the desired destination on the map.
4. A pop-up window will appear where you
can tap on the corresponding icon:
●
: favourite destination.
●
: new route.
●
Start: starts the route to the destination.
Oroad navigation
“Oroad navigation” calculates routes to se-
lected destination points using unknown data.
When a destination point is outside the known
roads or position data, navigation nds the
route to the closest point on a known road
and completes the path to the next destination
point with a direct connection.
Start navigation:
1. Move the view on the map until the desired
position can be selected. The navigation
map can be used by means of additional
nger movements ›››page300.
2. Press on any point on the map without po-
sition data.
3. A pop-up window will appear where you
can tap on the corresponding icon:
●
: favourite destination.
●
: new route.
●
Start: starts the route to the destination.
Start route guidance using contact details
Start route guidance with the saved address
data of a contact. Contacts saved without ad-
dress data cannot be used for route guidance.
Start navigation:
1. Press .
2. Press on the contact you want.
3. A pop-up window will appear where you
can tap on the corresponding icon:
●
: favourite destination.
●
: new route.
●
Start: starts the route to the destination.
Infotainment system
305
Navigation
1)
Not available in all markets.
Note
If the address details of a contact are ob-
solete, the route guidance will nevertheless
take you to the registered address. Check
that the contact address is updated.
Traic information
The infotainment system receives detailed
traic information automatically
1)
if the Inter-
net connection is established. This information
is displayed using symbols and by highlighting
the road network in colour on the map.
Traic incidents
Traic incidents, for example, traic jams or
congested traic, are shown on the navigation
map using symbols.
With active route guidance, traic incidents
that are on the current route are shown in
the route details. Such traic incidents can be
avoided ›››
page305, Function descriptions.
Traic ow indication
The navigation map shows traic ow accord-
ing to current traic events, highlighting the
road network in colour.
●
Yellow: Slow traic.
●
Red: Traic jam.
Note
Traic information receipt is subject to the
privacy settings. In maximum Privacy mode,
no traic information is received. The Track-
ing or Location level must be set up.
Function descriptions
Route details
The route details contain information on all in-
cidents, for example, the starting point, stop-
overs, traic events, POIs and destination, pro-
vided the navigation has such data.
If you press on an incident, an additional win-
dow opens providing more options. The avail-
able options depend on the incident and the
current settings.
Open and close the route details
●
To open them, press or swipe it.
●
To close them, press or swipe it.
Edit route guidance
To edit the route guidance, move the stop-
overs to the destination in the TripView view.
●
Hold the desired destination pressed until it
is visibly highlighted.
●
Move the destination to the desired position.
●
Remove your nger from the screen. The
route will recalculate.
Avoid traic incidents
The details of the route show the current traf-
c incidents if the navigation has such data.
Avoid traic incidents by editing route details
›››page305.
●
Press on a traic event.
●
Press on Avoid. The route will recalculate.
Split screen
When handling navigation functions, an addi-
tional window with other options may open.
Possible options depend on the function being
used.
Close the additional screen
●
Press on an empty area outside the addi-
tional window.
●
OR: press .
●
OR: press Accept.
Functions in the additional window:
Show on
map
Show what is selected on the
map.
306
Infotainment system
Functions in the additional window:
Add stop-
over desti-
nation
Add a stopover to the route
guidance.
Direct
route
Starts direct route guidance.
Delete Delete a stopover from the
route guidance.
Avoid Avoid traic jam. The route will
recalculate.
Stop route
guidance
Ends the current route guid-
ance.
Close the additional window.
Add a destination to favourites.
Learn usage pattern
When the vehicle is in motion, navigation saves
routes and destinations used to automatically
generate destination proposals. Destinations
are learned based on the time of day and the
day of the week.
Navigation can propose up to 5 routes at the
same time. The proposed routes may be dier-
ent from the routes of the normal route guid-
ance.
If one of the proposed destinations is selected,
the guide to that destination is started.
The route guidance follows the selected route
until the vehicle deviates from it. In that case,
the route is recalculated and takes you back
along the most direct path to the initially selec-
ted destination.
Important traic jams are taken into account
in the route guidance, and are avoided if alter-
native routes are available, provided navigation
has such data.
You can activate and deactivate the function
whenever you want.
Enable and disable learning usage pattern
The setting is in the corresponding navigation
menu > Basic function settings.
●
To activate the function, activate Learn us-
age pattern.
●
To disable the function, disable Learn usage
pattern.
●
To delete saved data, press Delete usage
pattern.
360° electric operating range display
Valid for: vehicles with plug-in hybrid drive
The 360° electric operating range display
shows the possible range with the current
charge level of the high voltage battery.
●
To deactivate the 360° range display, select:
Navigation Settings > Show range on map.
Note
●
If the battery charge level is very low,
the range indicator is automatically hidden.
When the battery is recharged, the range in-
dicator is displayed again.
●
If necessary, adapt the map view to display
the full range on the map.
Infotainment system
307
Telephone interface
Telephone interface
Introduction
Fig.180 Schematic representation: Phone
view.
You can use the telephone interface to
connect your mobile to the infotainment sys-
tem and operate phone functions through
it. The sound is played through the vehicle's
speakers.
You can connect up to two mobile phone devi-
ces simultaneously to the infotainment system.
High speeds, poor weather or road conditions
and a noisy ambience (even outside of the ve-
hicle), as well as the quality of reception can all
aect the quality of a telephone conversation
in the vehicle.
Note
●
As a general rule, pairing a device (for ex-
ample, a mobile phone device) is only nec-
essary once. You can restore the device con-
nection via Bluetooth® or Wi-Fi with the in-
fotainment system whenever you want with-
out having to pair the device again.
●
The availability of certain telephony func-
tions will depend on the features of the mo-
bile connected to the infotainment system,
such as the operating system, mobile net-
work, or phone company.
Telephone interface equipment
and symbols
Equipment features
●
Hands-free function.
●
Use up to two phones at the same time.
●
Phone book with a maximum of 5,000 con-
tacts.
●
SMS functions via Bluetooth®: SMS reading,
SMS writing (templates included), SMS play-
back, message history.
●
Email functions via Bluetooth®: reading
email, writing email.
308
Infotainment system
●
Connection to wireless charging option.
●
Connection to the microphone mounted on
the vehicle.
Symbols in the main menu
Contacts.
List of incoming and outgoing calls.
Enter telephone number.
Text messages (SMS and emails).
Telephone interface settings.
Symbols for calls
The symbols may be dierent depending on
the infotainment system.
Start a call or bring it to the foreground.
End or reject a call.
Open contact list or Start conference call.
Enter telephone number.
Mute the sound of the hands-free
Hold call.
Continue call.
Switch call to private mode.
Make an emergency call.
Voice mail.
Reject call with SMS Template.
Ignore an incoming call.
Switch the call to handsfree mode.
Go to the CarPlay context.
Remove a person from the conference
call.
Go to the contacts list.
Make a breakdown call.
Make a customer care call.
Call list symbols
●
To open the call lists, press .
Incoming call.
Outgoing call.
Missed call.
Telephone number (company).
Telephone number (private).
Mobile telephone number (company).
Mobile telephone number (private).
Fax (private).
Fax.
Symbols for text messages
The symbols may be dierent depending on
the infotainment system.
●
To open the text messages, press .
Activate voice control input ›››
page290.
Templates for text messages.
Places with special regulations
Switch o the mobile telephone and the tel-
ephone interface in places with a risk of ex-
plosion. These places are not always clearly
marked. They include, for example:
●
The vicinity of chemical pipelines and tanks.
●
The lower decks of boats and ferries.
●
In the proximity of vehicles that run on lique-
ed gas (such as propane or butane).
●
Places where the air is laden with chemicals
or particles such as our, dust or metal pow-
der.
●
All other places where the engine or tele-
phone must be switched o.
WARNING
Switch o the mobile phone in areas with a
risk of explosion!
Note
In areas where special regulations apply or
the use of mobile phones is forbidden, it
must be switched o at all times. The radi-
ation produced by the mobile phone when
switched on may interfere with sensitive
technical and medical equipment, possibly
resulting in malfunction or damage to the
equipment.
Infotainment system
309
Telephone interface
Active
Passive
Pairing, connecting and managing
Requirement for pairing:
●
Bluetooth® is activated on the mobile phone
device.
●
Bluetooth® is activated on the infotainment
system.
●
Depending on the mobile device, it will be
necessary to have the Bluetooth® menu open
or activate the Visibility option so that the de-
vice is visible from the infotainment system.
●
The vehicle must be stopped or someone
must be detected in the front passenger seat
to perform the pairing.
Pair a mobile phone device suitable for teleph-
ony with the infotainment system to use the
telephone interface functions. When making
the rst connection, the mobile phone device
is paired with the infotainment system. Doing
so saves a user prole.
The pairing can take a few minutes. The func-
tions available depend on the mobile phone
device used and its operating system.
Pair a mobile phone device
1. Open the list of available Bluetooth® devi-
ces on the mobile phone device and select
the name of the infotainment system.
2. Please note and, if necessary, conrm
the messages that appear on the mobile
phone device and on the infotainment
system. If the pairing was successful, the
phone data is saved in the user prole.
3. Optional: conrm the data transfer mes-
sage on the mobile phone device.
Active and passive connection
To use the functions of the telephone inter-
face, there must be at least one mobile phone
device connected to the infotainment system.
If there are several mobile phone devices con-
nected to the infotainment system, you can
switch between active and passive connec-
tions. To use the telephone interface with the
desired mobile phone device, establish the ac-
tive connection with the infotainment system.
Dierence between connection types
The mobile phone device is paired
and connected. The functions of the tel-
ephone interface are performed with the
data of said mobile phone device.
The mobile phone device is paired
and connected. Calls can be managed but
the phone book, messages or other func-
tions will not be active.
Paired mobile phone devices are stored in the
infotainment system, even if they are not cur-
rently connected.
Connect a mobile phone device
Requirement: the mobile phone device is
paired with the infotainment system.
●
Bluetooth® is activated on the mobile phone
device.
Establish an active connection
Requirement: several mobile phone devices
are connected to the infotainment system at
the same time.
●
Select the desired mobile phone device from
the drop-down menu. All other mobile phone
devices are automatically in a passive connec-
tion.
Voice control with Android Auto™ or Apple
Carplay™ technologies active
The voice control functions for phones may
not be available on all mobile devices, so
pressing and holding the voice control activa-
tion button on the multifunction steering
wheel can be used to activate the mobile devi-
ce’s voice assistant.
WARNING
If you perform the pairing while driving, it
could cause an accident or injury.
●
Perform pairing only with the vehicle at a
standstill.
310
Infotainment system
Note
●
While the infotainment system is in the
Known mobile phones menu, the wireless
charging function is disabled. When you exit
this menu, the wireless charging function is
activated again.
●
When pairing some mobile phone devices,
a PIN number is shown on the screen of the
mobile phone device. Enter or accept that
number in the infotainment system to com-
plete the pairing.
Basic and Comfort Telephony
Depending on the equipment, two types of tel-
ephone interface can be used:
●
Basic telephone interface.
●
Comfort telephone interface.
Basic telephone interface
The Basic telephone interface uses the Blue-
tooth® HFP prole for transmission. This in-
terface allows the use of telephone functions
through the infotainment system and playback
through the vehicle's speakers.
Comfort telephone interface
Like the Basic telephone interface, the Com-
fort telephone interface also uses the Blue-
tooth® HFP prole.
The Comfort phone interface can be equip-
ped with the wireless charging function
›››page311.
In order to use the functions of the wireless
charging function, you have to place a suitable
mobile phone device correctly in the storage
compartment. The mobile phone device will
then connect to the vehicle antenna. This im-
proves the reception and sound quality of calls.
Calling and sending messages
Open the telephone interface
●
Press MENU > .
Make a call
Select a phone number to start a call. Dierent
functions are available for selecting a phone
number:
Contacts
If a contact has several registered phone num-
bers you have to select one.
●
Press and press a number on the list to
start the call.
OR: press and enter the contact name in
the input eld to search for it. Press on the
contact to start the call.
OR: press a favourite in the telephone interface
main menu to start the call.
Calls
The telephone interface shows the call list of
the mobile telephone device. Start a call from
the call list.
●
Press > All and press a number on the list
to start the call.
OR: press and lter the call list entries (for
example, missed calls or dialled numbers). In
the ltered list, press a number to start the call.
Dial number
Manually enter a phone number to start a call.
While entering the phone number, contacts
that match that number are shown on the info-
tainment screen.
●
Press and enter the telephone number.
Press to start the call.
The last call is dialled by pressing and holding
the button on the multifunction steering
wheel.
Send messages
Depending on the mobile phone device and
the infotainment system used, you can send
and receive SMS and e-mails through the tele-
phone interface.
Infotainment system
311
Telephone interface
Send an SMS:
1. Press > Text message > Enter new mes-
sage and enter the message on the screen.
2. Enter the contact you want in the search
bar.
3. To send the message press OK.
Note
For messaging to be available, permissions to
share messages must be accepted in the mo-
bile device settings.
Send an email:
●
Press > E-mail > Enter new message and
enter the message on the screen.
●
Enter the contact you want in the search bar.
●
To send the message press OK.
Note
The availability of the E-mail function de-
pends on the connected mobile telephone
device and the e-mail apps that are used.
Phone book, favourites and speed
dial buttons
When a telephone is rst connected to the in-
fotainment system, the phone book is saved
in the infotainment system. Data transmission
may have to be conrmed and permissions for
sharing contacts on the telephone may have to
be accepted.
Each time the phone is reconnected, the
phone book is updated.
If conference calls are supported, calls with up
to six participants can be made by accessing
the phone book during a call. If there is a saved
image for a contact, it can be displayed in the
list next to the entry.
Favourites
A speed dial button can be assigned to a a
maximum of six phone book favourites. If there
is a registered photo saved for the contact, it is
shown on the speed dial button.
The dialling buttons have to be edited man-
ually.
Assign the speed dial button
●
In the Favourites menu, press the button,
then open the phone book to select a contact
as a favourite. If the contact has several phone
numbers, press on the number in the list.
Edit the speed dial button
●
To edit or delete a favourite contact press
the icon in the Favourites menu screen.
You can delete one or more favourites.
Call a favourite
●
Press the assigned speed dial button.
Note
Favourites are not updated automatically. If
you change a contact's phone number, you
have to reassign the speed dial button.
Connectivity Box
Fig.181 On the centre console: pad for the
mobile phone connection.
The Connectivity Box includes dierent func-
tions that will help to use your mobile device.
These are:
312
Infotainment system
1)
It only includes the wireless charge functionality.
●
Wireless Charger
1)
.
●
Mobile Signal Amplier.
Wireless charger
If your mobile device is equipped with in-
duction charging (Qi) technology, it can be
charged wirelessly.
To charge your mobile phone wirelessly:
●
Place your mobile device in the middle of
the pad with the screen facing up ›››Fig.181 ,
››› .
Make sure there are no objects between the
pad and the mobile phone.
The mobile phone will start charging automat-
ically. For further information about whether
your mobile device supports Qi technology,
check your phone's user manual or visit the
CUPRA website.
Mobile Signal Amplier
This reduces radiation in the vehicle and gives
you better reception.
For safety reasons, it is recommended that
you pair the system and the mobile using Blue-
tooth® and place it on the Connectivity Box
pad, for the best reception without having to
handle the mobile phone.
For connection to the vehicle’s external an-
tenna:
●
Place your mobile device in the middle of
the pad with the screen facing up ›››Fig.181 ,
››› .
Make sure there are no objects between the
pad and the mobile phone.
Your mobile phone will automatically be able to
use the external antenna function.
WARNING
Notications on the screen of the mobile de-
vice can distract the driver’s attention and
increase the risk of a serious accident.
●
Only place one suitable mobile device,
with Qi compatibility if applicable. To ensure
that it operates properly, place it without the
protective case and ensure that it has max-
imum dimensions (width x length) of 80 x
140mm (3.15 x 5.512 inches) on the base of
the Connectivity Box as indicated.
●
If the mobile device is not placed on the
base of the Connectivity Box, in the correct
position, or if its dimensions exceed those
specied, it may not be recognised or may
not charge correctly. Under certain circum-
stances, the infotainment system indicates
that there is a foreign object in the storage
compartment. Using a suitable mobile phone
device and correcting its position can elimi-
nate the fault.
WARNING
●
The mobile phone may become warm due
to wireless charging. Think about this before
you pick it up, and take care when removing
it.
●
There must be no metallic or other objects
between the mobile phone and the housing,
to prevent the functionality of the Connec-
tivity Box from being aected.
NOTICE
Do not leave the key near the Wireless
Charger area as this may cause interference.
NOTICE
A active NFC function on your mobile device
may prevent its wireless charging from work-
ing properly. CUPRA recommends that you
deactivate the NFC function on your mobile
device when charging.
NOTICE
The base of the Connectivity Box is not re-
movable.
Infotainment system
313
Telephone interface
Note
●
Your mobile device must support the Qi
inductive charging interface standard for
proper operation.
●
Charging time and temperature vary de-
pending on the device that is used.
●
To improve the cooling of your mobile de-
vice during charging, the Connectivity Box is
tted with a ventilation channel to allow air
to pass through. Keep the base area as clear
as possible of objects to promote cooling.
●
The maximum charging capacity is 15W.
●
Qi technology does not allow simultaneous
charging of more than one mobile device.
●
No improvement in reception can be guar-
anteed if there is more than one mobile
phone on the pad.
●
You are advised to keep the engine running
to guarantee proper wireless charging.
●
When a telephone with Qi technology is
connected by USB, it will be charged by the
means specied by the manufacturer.

Related Topics

Popular Owner Manuals