2024-2026 Cupra Terramar SUV Infotainment system -> Navigation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Infotainment system -> Navigation for Your Cupra Terramar SUV First Generation (2024-2026)

300
Infotainment system
Navigation
Introduction
Fig.179 Schematic representation: Navigation
view.
Note
The “Navigation” function is not available in
all markets.
A global satellite system determines the cur-
rent position of the vehicle and the sensors
mounted on the vehicle analyse the routes
taken. All measured values and possible traic
events are compared with the available maps
to allow optimal navigation to the destination.
Navigation announcements and graphic repre-
sentations will guide you to your destination.
Navigation is managed on the screen.
Depending on the country, some functions of
the infotainment system will not be available
on the screen when travelling above a certain
speed. It is not a malfunction, but is due to
compliance with legislation.
Navigation announcements
Navigation announcements audible indica-
tions for driving relating to the current route.
The type and frequency of navigation an-
nouncements depend on the driving situation,
for example, starting the guide to the destina-
tion, driving on the motorway or on a round-
about and the settings.
If the exact destination cannot be reached be-
cause, for example, it is in a non-digitised area,
indications relating to the address and the dis-
tance to the destination are displayed on the
screen.
During dynamic route guidance, you will re-
ceive information about reported traic con-
gestion on the route. An additional navigation
announcement is given if the route is recalcu-
lated due to traic congestion.
While a navigation announcement is playing,
its volume can be adjusted. Subsequent navi-
gation announcements will be played with the
newly adjusted volume.
Infotainment system
301
Navigation
Limitations during navigation
If the infotainment system cannot receive data
from GPS satellites, for example, in a tunnel or
in an underground garage, navigation contin-
ues using the vehicle's sensors.
In areas that are not digitised or are only parti-
ally digitised in the infotainment's memory, the
infotainment system will still attempt to provide
route guidance.
In the case of missing or incomplete navigation
data, it may not be possible to determine the
exact position of the vehicle. This may mean
that navigation is not as precise as usual.
Roads and streets are subject to constant
change (e.g. new roads, road works, roads
closed to traic, changes to street names and
building numbers). If the navigation data is ob-
solete, this may lead to errors or inaccuracies
during route guidance.
Managing the navigation map
For optimal viewing, you can also manage the
navigation map with additional nger move-
ments.
Moving the map
Tip: use your index nger
●
Move the map with your nger.
Zooming into or out of the view
Tip: use your index nger
●
Press twice on the map and keep your nger
pressed on the screen.
●
To zoom out the map view, move your nger
upwards. To zoom into the map view, move
your nger downwards.
Change the 2D / 3D view
Tip: use your index and middle ngers
●
Press on the map with both ngers at the
same time and keep them pressed.
●
For 2D view scroll your ngers down, for 3D
view scroll your ngers up.
Rotate the map
Tip: use your thumb and index nger
●
Press on the map with both ngers at the
same time and keep them pressed.
●
To rotate the map view, turn your ngers
clockwise or anticlockwise.
Saved data
The infotainment system saves certain data, for
example, frequent routes and position data, to
make it easier to enter the destination and to
optimise route guidance.
Delete saved data
●
Press Settings > Basic function settings >
Delete and then Accept.
WARNING
Select the settings, enter the destination and
the modications for navigation only with
the vehicle at a standstill.
Note
●
If a detour is passed during route guidance,
navigation may recalculate the route.
●
The quality of the navigation recommen-
dations given by the Infotainment system de-
pends on the navigation data available and
any reported traic congestions.
●
Navigation announcements are not emit-
ted if the sound is muted in the infotainment
system.
Navigation functions and symbols
Navigation
Navigation functions depend on the equip-
ment and country.
All navigation functions require the activation
of CUPRA CONNECT PLUS online services.
302
Infotainment system
1)
Not available in all markets.
Functions
●
Entering the destination and route calcula-
tion (oline and online.
1)
)
●
Display of two navigation maps at the same
time (screen and instrument cluster).
●
Update of online maps.
1)
●
Predictive navigation.
●
3D urban maps.
●
Online traic information.
1)
●
Dynamic POIs (points of interest).
Symbols on the map
The buttons and indications depend on the
settings and the current driving situation.
Symbols for traic events and points of inter-
est (POIs) are displayed on the map, for exam-
ple, petrol stations, train stations or interesting
stopovers, provided navigation has such data
›››page305.
Current position.
Search for destinations.
Destinations along the route.
Final destination.
Home address.
Work address.
Favourite destinations.
Additional window with route options.
Centre the map on the current position.
Change view: 2D oriented to the north,
or 2D oriented to the direction of travel,
or 3D to the direction of travel.
Information about the current route guid-
ance.
Map scale.
Other symbols
Entering the detailed destination for an
address.
Search for destinations.
Back
Symbols in the route details
Current position.
Destination of the current guidance.
POI symbols (points of interest)
POIs (points of interest) are shown on the map,
provided the navigation has said data.
Click on the desired POI (point of interest) to
start route guidance ›››
page303.
Petrol station.
Car park.
Tourist information oices.
Train station.
Restaurant.
Traic information.
POIs (points of interest) are shown on the
map, provided the navigation has said data
›››
page305.
Click on a traic event to open an additional
window with further details ›››page305.
Slow traic.
Traic jam.
Accident.
Broken down vehicle.
Slippery surface (ice or snow).
Road closed to traic.
Slippery road hazard.
Danger.
Road works.
Strong wind.
Infotainment system
303
Navigation
1)
Not available in all markets.
Reduced visibility.
Navigation data
The Infotainment system is equipped with a
built-in navigation data memory. Depending
on the country, the necessary navigation data
may already be pre-installed.
To provide correct route guidance and make
the most of the functions oered, the infotain-
ment system should be updated on a regular
basis.
Using obsolete data may lead to errors during
navigation. Current routes cannot be traced or
the route guidances will lead to mistaken desti-
nations.
Ensure navigation data is updated at all times.
Online updating of navigation data
1)
The navigation data of the regions through
which you travel frequently is automatically up-
dated in the background if the Internet con-
nection is established and the privacy settings
are valid.
●
With the ignition switched on, the navigation
data is updated automatically.
Manual update of navigation data
Current navigation data for large regions, for
example Western Europe, can be downloaded
from and stored on USB data
devices.
●
Download the navigation data to a USB data
device.
●
Turn on the ignition of the vehicle.
●
Connect the USB data device to the infotain-
ment system. Navigation data is automatically
updated in the background.
The map version is displayed in HOME > >
System information.
Note
Automatic update of the navigation data is
subject to the privacy settings. No update is
made in incognito mode.
Start route guidance
Depending on the country and equipment, dif-
ferent functions are available to enter destina-
tions.
The dierent functions for entering destina-
tions are found in the navigation main menu.
Opening the Navigation main menu
●
Press MENU > .
Select the destination and start navigation
1. Press .
2. Select the desired destination. You can
chose from Suggestions, Recent destina-
tions and Favourite destinations.
OR: press and enter the address in the
input screen.
OR: detailed address.
3. Press Start.
Suggestions
The destination synopsis uses recorded data to
propose possible destinations.
Select the destination and start navigation:
1. Tap and then Suggestions.
2. Select the desired destination. The route
guidance starts automatically.
Quick start: for a quick start, press and hold
the desired destination for a few seconds.
Recent destinations
Navigation saves the recent destinations to
make them available for route guidance.
304
Infotainment system
Select the destination and start navigation:
1. Tap and then Recent destinations.
2. Press the desired destination.
3. Press Start.
Quick start: for a quick start, press and hold
the desired destination for a few seconds.
Favourite destinations
Save up to 20 destinations as favourites.
To save a destination as a favourite press in
the split screen when entering the destination.
Select the destination and start navigation:
1. Tap and then Favourites.
2. Press the desired destination.
3. Press Start.
Note
Enter the destination as accurately as possi-
ble. If you enter a destination incorrectly, the
route guidance will not be able to start or it
will guide you to an incorrect destination.
Start route guidance by selecting from the
map
The navigation map includes active areas at
many points that are suitable for entering the
destination. To do this, press the desired posi-
tion or place on the map. If there is map data at
this point, you can start route guidance.
Whether it is possible to enter the destination
through the navigation map depends on the
state of the data and it is not possible for all
positions.
To start “oroad navigation”, press an empty
area without position data.
Start navigation:
1. Press .
2. Move the view on the map until the desired
position can be selected. The navigation
map can be used by means of additional
nger movements ›››page300.
3. Press the desired destination on the map.
4. A pop-up window will appear where you
can tap on the corresponding icon:
●
: favourite destination.
●
: new route.
●
Start: starts the route to the destination.
Oroad navigation
“Oroad navigation” calculates routes to se-
lected destination points using unknown data.
When a destination point is outside the known
roads or position data, navigation nds the
route to the closest point on a known road
and completes the path to the next destination
point with a direct connection.
Start navigation:
1. Move the view on the map until the desired
position can be selected. The navigation
map can be used by means of additional
nger movements ›››page300.
2. Press on any point on the map without po-
sition data.
3. A pop-up window will appear where you
can tap on the corresponding icon:
●
: favourite destination.
●
: new route.
●
Start: starts the route to the destination.
Start route guidance using contact details
Start route guidance with the saved address
data of a contact. Contacts saved without ad-
dress data cannot be used for route guidance.
Start navigation:
1. Press .
2. Press on the contact you want.
3. A pop-up window will appear where you
can tap on the corresponding icon:
●
: favourite destination.
●
: new route.
●
Start: starts the route to the destination.
Infotainment system
305
Navigation
1)
Not available in all markets.
Note
If the address details of a contact are ob-
solete, the route guidance will nevertheless
take you to the registered address. Check
that the contact address is updated.
Traic information
The infotainment system receives detailed
traic information automatically
1)
if the Inter-
net connection is established. This information
is displayed using symbols and by highlighting
the road network in colour on the map.
Traic incidents
Traic incidents, for example, traic jams or
congested traic, are shown on the navigation
map using symbols.
With active route guidance, traic incidents
that are on the current route are shown in
the route details. Such traic incidents can be
avoided ›››
page305, Function descriptions.
Traic ow indication
The navigation map shows traic ow accord-
ing to current traic events, highlighting the
road network in colour.
●
Yellow: Slow traic.
●
Red: Traic jam.
Note
Traic information receipt is subject to the
privacy settings. In maximum Privacy mode,
no traic information is received. The Track-
ing or Location level must be set up.
Function descriptions
Route details
The route details contain information on all in-
cidents, for example, the starting point, stop-
overs, traic events, POIs and destination, pro-
vided the navigation has such data.
If you press on an incident, an additional win-
dow opens providing more options. The avail-
able options depend on the incident and the
current settings.
Open and close the route details
●
To open them, press or swipe it.
●
To close them, press or swipe it.
Edit route guidance
To edit the route guidance, move the stop-
overs to the destination in the TripView view.
●
Hold the desired destination pressed until it
is visibly highlighted.
●
Move the destination to the desired position.
●
Remove your nger from the screen. The
route will recalculate.
Avoid traic incidents
The details of the route show the current traf-
c incidents if the navigation has such data.
Avoid traic incidents by editing route details
›››page305.
●
Press on a traic event.
●
Press on Avoid. The route will recalculate.
Split screen
When handling navigation functions, an addi-
tional window with other options may open.
Possible options depend on the function being
used.
Close the additional screen
●
Press on an empty area outside the addi-
tional window.
●
OR: press .
●
OR: press Accept.
Functions in the additional window:
Show on
map
Show what is selected on the
map.
306
Infotainment system
Functions in the additional window:
Add stop-
over desti-
nation
Add a stopover to the route
guidance.
Direct
route
Starts direct route guidance.
Delete Delete a stopover from the
route guidance.
Avoid Avoid traic jam. The route will
recalculate.
Stop route
guidance
Ends the current route guid-
ance.
Close the additional window.
Add a destination to favourites.
Learn usage pattern
When the vehicle is in motion, navigation saves
routes and destinations used to automatically
generate destination proposals. Destinations
are learned based on the time of day and the
day of the week.
Navigation can propose up to 5 routes at the
same time. The proposed routes may be dier-
ent from the routes of the normal route guid-
ance.
If one of the proposed destinations is selected,
the guide to that destination is started.
The route guidance follows the selected route
until the vehicle deviates from it. In that case,
the route is recalculated and takes you back
along the most direct path to the initially selec-
ted destination.
Important traic jams are taken into account
in the route guidance, and are avoided if alter-
native routes are available, provided navigation
has such data.
You can activate and deactivate the function
whenever you want.
Enable and disable learning usage pattern
The setting is in the corresponding navigation
menu > Basic function settings.
●
To activate the function, activate Learn us-
age pattern.
●
To disable the function, disable Learn usage
pattern.
●
To delete saved data, press Delete usage
pattern.
360° electric operating range display
Valid for: vehicles with plug-in hybrid drive
The 360° electric operating range display
shows the possible range with the current
charge level of the high voltage battery.
●
To deactivate the 360° range display, select:
Navigation Settings > Show range on map.
Note
●
If the battery charge level is very low,
the range indicator is automatically hidden.
When the battery is recharged, the range in-
dicator is displayed again.
●
If necessary, adapt the map view to display
the full range on the map.

Related Topics

Popular Owner Manuals