2024-2026 Cupra Terramar SUV Seats and headrests -> Seat functions User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seats and headrests -> Seat functions for Your Cupra Terramar SUV First Generation (2024-2026)

128
Seats and headrests
1)
Not available in all markets.
●
Unlock the backrest ›››page125.
●
Insert the headrest bars into the guides until
they are heard to engage. It should not be pos-
sible to remove the headrest from the back-
rest.
●
Move the backrest until it engages properly.
WARNING
Remove the rear headrests only when it is
necessary to t a child seat. After removing a
child seat, ret the headrest immediately.
Seat functions
Memory function
Fig.99 On the outer side of the driver's
seat: memory buttons.
Memory buttons
The memory buttons can be used to save and
activate settings for the driver seat and exterior
mirrors.
The settings will also be saved in the user of
the online services
1)
.
Save the settings for the driver seat and ex-
terior mirrors for forward gear
●
Apply the electronic parking brake.
●
Set the gearbox to the neutral position.
●
Switch the ignition on.
●
Adjust the driver seat and exterior mirrors.
●
Press for longer than 1 second ›››Fig.99.
●
Press the memory button in which to store
the settings within approx. 10 seconds. An
audible signal conrms that they have been
saved.
Save the settings of the front passenger ex-
terior mirrors for reversing.
●
Apply the electronic parking brake.
●
Set the gearbox to the neutral position.
●
Switch the ignition on.
●
Press whichever memory button you want.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb edge
well.
●
The set position for the mirrors is automati-
cally saved and assigned to the key with which
you unlocked the vehicle.
Activating the settings
●
With the vehicle stopped and the ignition
switched on, press and hold the correspond-
ing memory button until the saved position is
reached.
●
OR: With the ignition switched o and the
driver's door open, briey press the corre-
sponding button.
The front passenger side exterior mirror auto-
matically changes from the position stored for
reversing as soon as the vehicle moves forward
at a speed of at least 15km/h (10mph) or
when the gear selection lever is changed to a
position other than R ›››page142.
Initialising the seat position memory
If, for example, the driver seat has been re-
placed, the position memory system must be
restarted.
Restarting deletes all memories and assign-
ments of seats with memory functions. The
memory keys can then be programmed again.
Seats and headrests
129
Seat functions
●
Open the driver's door and do not get into
the vehicle.
●
Change the seat settings from outside.
●
Tilt the backrest fully forward.
●
Release the control to adjust the inclina-
tion and press it again until an audible signal
sounds.
Easy Entry function
Depending on the equipment, the Easy Entry
function makes it easier for the driver to enter
and exit by moving the seat forwards or back-
wards respectively.
The function is activated via the driver setting
in the sub-menu of seat settings in the seats
menu of the infotainment system.
WARNING
Only set the memory function when the ve-
hicle is stationary.
Note
If the driver's door is opened approx. 10 mi-
nutes after the vehicle was unlocked or later,
the driver seat and the exterior mirrors do
not move automatically.
Front centre armrest
Fig.100 Front centre armrest
To raise the armrest, pull it fully up in the direc-
tion of the arrow ›››
Fig.100 or step by step,
depending on how far you want to raise it.
To lower the armrest, rst lift it to its highest
position. Then lower it down.
To move the armrest horizontally, move it for-
ward ›››Fig.100 or backward as much as
possible in the direction of the corresponding
arrow.
WARNING
The front centre armrest may obstruct the
driver's arm movements, which could cause
an accident and severe injuries.
●
Keep the storage compartments of the
centre armrest closed at all times while the
vehicle is in motion.
●
Never let anyone sit on the centre arm-
rest while the vehicle is in motion, not even
a child. This position is incorrect and may
cause severe injuries.
Rear centre armrest
Fig.101 Folding rear centre armrest.
There might be a folding armrest in the rear
centre seat.
●
To lower the armrest, pull the cord in the
direction of the arrow ›››Fig.101.
●
To raise the armrest, push it up in the oppo-
site direction to the arrow and press it as far as
it will go into the seat backrest.
When the centre armrest is down, do not allow
anybody to travel in the centre seat of the rear
bench.
130
Seats and headrests
WARNING
To decrease the risk of injuries while driv-
ing, the rear centre armrest must always be
raised.
●
When the centre armrest is down, nobody
may travel in the centre rear seat, not even a
child. An incorrect sitting position may cause
severe injuries.

Related Topics

Popular Owner Manuals