2024-2026 Cupra Terramar SUV Storing objects -> Luggage compartment User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Storing objects -> Luggage compartment for Your Cupra Terramar SUV First Generation (2024-2026)

Storing objects
315
Luggage compartment
NOTICE
Electrical wires or, depending on the fea-
tures, the antenna embedded into the rear
windows could be damaged, even irrepara-
bly, if they are in contact with objects.
Note
Straps for securing the load to the fastening
rings are commercially available from acces-
sory shops.
Luggage compartment
Luggage compartment shelf
Fig.182 In the luggage compartment:
removing and installing the shelf.
Fig.183 In the luggage compartment:
removing and installing the shelf.
Removing
●
Detach the cord loops ›››Fig.182
B
from
their hooks
A
.
●
Remove the rear shelf from the side supports
›››Fig.183 by pulling it upwards and then take
it out.
If necessary, the rear shelf can be stored un-
der the luggage compartment double oor
›››page316.
Fitting
●
Insert the cover horizontally so that the
“recess” ts onto the axis of the supports
›››
Fig.183 and press down until it engages.
●
Attach the securing straps ›››Fig.182
B
onto the rear lid.
WARNING
Animals, loose or unsecured or objects car-
ried on the rear shelf can cause serious injury
in case of sudden manoeuvring or braking or
in case of an accident.
●
Do not leave hard, sharp or heavy objects
loose or in bags on the rear shelf.
●
Never transport animals on the rear shelf.
NOTICE
●
Before closing the rear lid, ensure that the
rear shelf is correctly tted.
●
An overloaded luggage compartment
could mean that the rear shelf is not cor-
rectly seated and it may be bent or damaged.
●
If the luggage compartment is overloaded,
remove the rear shelf.
Note
Ensure that, when placing items of clothing
on the rear shelf, rear visibility is not reduced.
316
Storing objects
Store the rear shelf
Fig.184 In the luggage compartment:
remove covers to accommodate the rear
shelf in the luggage compartment.
Fig.185 In the boot: tting the rear shelf.
Depending on the equipment, once the lug-
gage compartment shelf has been removed, it
can be stored under the luggage compartment
oor.
●
Remove the left and right covers
1
and store
them in the compartments under the oor
›››
Fig.184.
●
Place the rear shelf in the corresponding
housing ›››Fig.185.
Variable luggage compartment
oor
Variable oor in high position
Fig.186 Variable luggage compartment
oor: high position.
●
To move from the low position to the
high position, lift the oor using the handle
›››Fig.186
1
, and pull it back until the
front of the oor has fully passed the supports
›››
Fig.187
2
.
●
Move the oor forward over the supports as
far as the rear seat backrest and then lower the
oor with the handle
1
.
Variable oor in low position
Fig.187 Variable luggage compartment
oor: low position.
●
To move from the high position to the
low position, lift the oor using the handle
›››Fig.186
1
, and pull it back until the
front of the oor has fully passed the supports
›››
Fig.187
2
.
●
Now let the front part fall to the oor and
slide the oor forwards as far as the rear seat
backrest; lower the oor at the same time with
the handle
1
.
Note
CUPRA recommends returning the variable
oor to the high position ›››Fig.186 when
additional space is no longer required.

Related Topics

Popular Owner Manuals