2024-2026 Cupra Terramar SUV Storing objects -> Roof carrier User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Storing objects -> Roof carrier for Your Cupra Terramar SUV First Generation (2024-2026)

320
Storing objects
Trapdoor for transporting long ob-
jects
Fig.194 Rear seat backrest: opening the
trapdoor for long objects.
On the rear seat, behind the central armrest,
there is a trapdoor for transporting long items
in the interior, such as skis.
Opening the trapdoor
●
Press the unlocking button ›››Fig.194
1
and fold the trapdoor forwards›››
. The
trapdoor is not engaged when the red marking
of button
2
is visible.
●
Open the rear lid.
●
Insert the long objects through the trapdoor
from the luggage compartment.
●
Secure the objects with the seat belt rmly.
●
Close the tailgate.
Closing the trapdoor
●
Lift the seat back and press it rmly into the
lock until it engages correctly.
The red marking on button
2
should no lon-
ger be visible when the backrest is properly
secured.
WARNING
The presence of objects in the central airbag
deployment area can prevent it from operat-
ing properly and can cause serious injury.
●
Do not leave any objects in the central air-
bag deployment zone ›››page59.
WARNING
●
Do not use the hatch while driving.
●
Do no trap or damage the seat belt when
raising the trapdoor.
●
When lowering or lifting the trapdoor, keep
your hands, ngers, feet and other body
parts out of its path.
●
When the trapdoor is lowered or is not
properly engaged nobody else can travel
in the corresponding seats, particularly chil-
dren.
Roof carrier
Introduction
The vehicle roof has been designed to opti-
mise aerodynamics. For this reason, cross bars
or conventional roof carrier systems cannot be
secured to the roof water drains.
As the roof water drains are integrated in the
roof to reduce air resistance, only CUPRA-ap-
proved cross bars and roof carrier systems can
be used.
Cases in which cross bars and the roof car-
rier system should be disassembled.
●
When they are not used.
●
When the vehicle is washed in a car wash.
●
When the vehicle height exceeds the maxi-
mum height, for example, in some garages.
WARNING
●
Always secure the load properly using belts
or retaining straps that are suitable and in a
good condition.
●
Bulky, heavy, long or at loads have a neg-
ative eect on aerodynamics, the centre of
gravity and driving performance.
●
Avoid sudden braking and manoeuvres.
●
Adapt your speed and driving style at all
times to suit visibility, weather, road and traf-
c conditions.
Storing objects
321
Roof carrier
NOTICE
●
Remove the cross bars and the roof carrier
system before entering a car wash.
●
Vehicle height is increased by the installa-
tion of cross bars or a roof carrier system
and the load secured on them. For this pur-
pose, check that your vehicle's height does
not surpass the headspace limit, for example,
for underpasses or for entering garage doors.
●
Cross bars, the roof carrier system and the
load secured on them should not interfere
with the roof aerial or hamper the path of the
panoramic sun roof and the rear lid.
●
On opening the rear lid make sure that it
does not knock into the roof load.
For the sake of the environment
When cross bars and a roof carrier system are
installed, the increased air resistance means
that the vehicle uses more fuel.
Securing the crossbars and the
roof carrier system
Fig.195 Attachment points for the crossbars
for the roof carrier.
The crossbars are the basis of a series of spe-
cial roof carrier systems. For safety reasons,
special xtures must be used to safely trans-
port luggage, bicycles, skis, surf boards or
boats on the roof. The appropriate accessories
can be purchased at specialised CUPRA deal-
ers or any SEAT dealership.
Always secure the crossbars and the roof car-
rier system properly. Always take the assem-
bly instructions that come with the crossbars
and the roof carrier system in question into
account.
Installing the bars
The crossbars are assembled on the roof
railings. The distance between crossbars
›››
Fig.195
A
should be between 70 and
90cm and the distance between the crossbars
and the brackets of the roof railings
B
must be
9cm.
WARNING
Incorrect attachment and use of the cross-
bars and the roof carrier system may cause
the whole system to detach from the roof
and cause an accident and injuries.
●
Always take the manufacturer assembly in-
structions into account.
●
Check threaded joints and attachments
before moving o and if necessary tighten
them after you have travelled a short dis-
tance. When making long trips, check the
threaded joints whenever you stop for a rest.
●
Do not modify or repair the crossbars or
roof carrier system.
Note
Always read the assembly instructions that
come with the crossbars and the roof carrier
system carefully and keep them in the vehi-
cle.

Related Topics

Popular Owner Manuals