2024-2026 Cupra Terramar SUV Visibility -> Mirrors User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Visibility -> Mirrors for Your Cupra Terramar SUV First Generation (2024-2026)

Visibility
141
Mirrors
Note
●
The use of an alcohol-based glass cleaner
is recommended to remove waxes and coat-
ings.
●
Do not put stickers on the windscreen in
front of the rain sensor. This can cause alter-
ations or failures.
Troubleshooting
Windscreen washer uid level too low
The control lamp lights up in yellow. Rell the
washer uid reservoir at the next opportunity
›››
page360.
Mirrors
General safety instructions
The exterior and interior mirrors allow the
driver to observe vehicles driving behind and
adapt his or her driving behaviour accordingly.
For safe driving, it is important for the driver to
adjust the exterior mirrors and interior mirror
correctly before setting o.
When looking through the exterior mirrors and
the interior mirror, it is not possible to see the
entire area behind and to the sides of the vehi-
cle. These areas outside the eld of view are
known as the blind spot. Other road users and
objects may be in the blind spot.
WARNING
Adjusting the exterior mirrors and interior
mirror while driving can distract the driver.
This could cause accidents and lead to seri-
ous injuries
●
Only adjust the exterior mirrors and inte-
rior mirror when the vehicle is stationary.
●
When parking, changing lanes, overtaking
or turning, always keep a close eye on your
surroundings, as other road users or objects
may also be in the blind spot.
●
Always make sure that the mirrors are ad-
justed correctly and that visibility to the rear
is not reduced by ice, snow, fogging or other
objects.
WARNING
A failure to accurately estimate the distance
to vehicles driving behind can lead to serious
accidents and injuries.
●
Curved (convex or aspherical) mirrors in-
crease the eld of view and objects in them
appear smaller and further away.
●
Curved mirrors do not allow you to pre-
cisely calculate the distance to vehicles driv-
ing behind, so using them when changing
lanes could cause serious accidents and inju-
ries.
●
If possible, use the interior mirror to pre-
cisely calculate the distance to vehicles driv-
ing behind you, or to other objects.
●
Always make sure you have suicient visi-
bility to the rear.
WARNING
The automatic anti-dazzle mirrors contain an
electrolyte uid which could leak if the mir-
ror is broken.
●
If it gets out, the electrolyte uid can
irritate the skin, eyes and respiratory or-
gans, particularly in the case of people with
asthma or similar diseases. Immediately in-
hale enough fresh air and get out of the vehi-
cle, or open all windows and doors if this is
not possible.
●
If the electrolyte uid comes into contact
with your eyes or skin, immediately rinse the
aected area with plenty of water for at least
15 minutes and seek medical advice.
●
If the uid comes into contact with foot-
wear or clothing, rinse immediately with
plenty of water for at least 15 minutes. Clean
thoroughly before using the footwear or
clothing in question again.
●
If the electrolyte uid is swallowed, imme-
diately rinse the mouth with plenty of water
for at least 15 minutes. Do not induce vomit-
ing unless advised by a doctor. Immediately
seek medical attention.
142
Visibility
/
NOTICE
Electrolyte uid may leak if the automatic
anti-dazzle mirror is broken. This liquid at-
tacks plastic surfaces. Therefore, it should
be cleaned as fast as possible with a damp
sponge or similar.
Interior mirror
Interior mirror with automatic anti-dazzle
function
When the ignition is switched on, the sensors
in the mirror measure the light falling on it from
behind and in front.
The interior mirror automatically darkens
based on the measured values.
If the light falling onto the sensors is blocked or
interrupted, e.g. by a sunshade blind or hang-
ing objects, the automatic anti-dazzle interior
mirror does not work or does not work prop-
erly. Similarly, the use of portable navigation
devices attached to the windscreen or close to
the automatic anti-dazzle interior mirror can
aect the operation of the sensors ›››
.
The automatic anti-dazzle function is deacti-
vated in certain situations, e.g. when reverse
gear is engaged.
WARNING
Light from screens of portable navigation
devices can cause malfunctions of the au-
tomatic anti-dazzle interior mirror and may
cause serious accidents and injuries.
●
Abnormal operation of the automatic anti-
dazzle function may result in it being impos-
sible to use the interior mirror to precisely
calculate the distance to vehicles driving be-
hind, or to other objects.
Adjusting the exterior mirrors
Fig.108 Driver’s door detail: exterior
mirror control.
Turn the control to the corresponding posi-
tion.
By moving the control to the desired po-
sition, adjust the rear view mirrors on the
left side (
) and on the right side ( ) in the
desired direction.
Depending on the equipment tted on
the vehicle, the mirrors may be heated
according to the outside temperature.
Fold the mirrors ››› .
The exterior mirror cannot be adjusted
and all functions are deactivated.
Activating exterior mirror functions
The following exterior mirror functions can
be activated and deactivated in the vehicle
settings menu of the infotainment system
›››page39.
Note
The exterior mirror functions are described
below. For left-hand drive vehicles, position
corresponds to the exterior mirror on the
driver’s side and position corresponds to
the exterior mirror on the passenger’s side.
Do the opposite for right-hand drive vehi-
cles.
Visibility
143
Mirrors
1)
Do the opposite in right-hand drive vehicles.
2)
Not available in all markets.
Synchronized regulation of the exterior mir-
rors
The synchronised mirror setting simultane-
ously adjusts the right hand exterior mirror
when the left mirror is adjusted.
●
Turn the control to position
1)
.
●
Adjust the left-hand exterior mirror. The
right exterior mirror will be adjusted at the
same time (synchronised).
●
If necessary, correct the setting of the right
hand mirror: turn the control to position
1)
.
Folding the exterior mirrors when locking
the vehicle
When the vehicle is locked or unlocked from
the outside, the exterior mirrors may fold in
or out automatically, depending on the equip-
ment. For this purpose, the rotary control has
to be in position
, , , or .
If the rotary control of the electric exterior mir-
rors is in the folded position, the exterior mir-
rors remain folded.
Memory function
The memory buttons ›››page128 can be
used to save and turn on settings for the exte-
rior mirrors.
The settings will also be saved in the user of
the online services
2)
.
Saving the passenger rear view mirror set-
tings for reversing
●
Switch the ignition on.
●
In the infotainment system, select > Vehi-
cle > Exterior > Mirrors ›››page39.
●
Select position
1)
on the control.
●
Select reverse gear.
●
Adjust the front passenger exterior mirror so
that you can see, for example, the kerb area
well.
●
Release the reverse gear.
●
The adjusted position for the rear view mirror
is stored.
Activating the passenger side exterior mirror
settings for reversing
●
Turn the exterior mirror control knob to posi-
tion
1)
.
●
Engage reverse gear with the ignition
switched on. The right-hand exterior rear-view
mirror will move to the saved position.
The passenger side exterior mirror leaves the
saved reversing position when the vehicle is
travelling faster than approx. 15km/h (9mph),
or if the control is turned from position
to
another position.
WARNING
Folding the exterior mirrors in and out care-
lessly can cause injury.
●
Only fold or unfold the exterior mirror if
there is no one in the path of the mirror.
●
When moving the mirror, be careful not to
pinch your ngers between the mirror and
the mirror holder.
NOTICE
●
Before washing the vehicle in an automatic
car wash, please make sure that the exterior
mirrors are folded in to prevent them from
being damaged.
●
The electrically folding exterior mirrors
must only be operated electrically, not by
hand, as this could damage their electric
drive.

Related Topics

Popular Owner Manuals