TYRE PRESSURE LOSS WARNING (2/3)
Note:
Puncture
2
The standard tyre pressure cannot be
less than that recommended and indi-
cated on the door frame.
The warning light
ꢀ
light up on the ins-
and the red
warning light
trument panel, alongside a beep.
Ò
Check tyre pressure
This indicates that at least one wheel
is punctured or severely underinflated.
Replace it or contact an authorised
dealer if it is punctured. Top up the tyre
pressure if the wheel is deflated.
The warning light
flashing). This indicates that at least
one tyre is flat.
ꢀ
comes on (not
3
Check and, if necessary, readjust the
pressures of the four wheels when cold.
Check tyre sensors
The warning light
few minutes’ driving.
ꢀ
goes off after a
The warning light
several seconds, then stays on, along
ꢀ
flashes for
with the orange warning light
This indicates that the sensor on at
least one wheel is missing or faulty.
Ò
.
With the engine stopped:
– repeatedly press the button 3 to
select “SEt tP” on the display 2;
– press and hold (around 3 seconds)
button 3 to start initialisation. “SEt tP”
flashes then comes on steady.
When “SEt tP” disappears, the stan-
dard tyre pressure is saved.
Reinitialisation is carried out after a few
minutes’ driving.
The red warning light
requires you to stop imme-
diately, for your own safety,
Ò
as soon as traffic conditions allow.
The sudden loss of pressure in a
tyre (burst tyre, etc.) cannot be de-
tected by the system.
2.17