ENGINE OIL LEVEL: topping up, filling (3/3)
Resetting the alert after an oil
change
(depending on the vehicle)
If you change the oil yourself, you will
need to reset the oil change warning.
To do this, after switching on the igni-
tion, for ten seconds you must:
– Depress the accelerator pedal fully,
– with your foot on the accelerator,
depress the brake pedal three times
in succession.
Reinitialisation is complete when the
#
indicator light goes out. If this is
not the case, repeat the operation.
Special case: if you change the oil
before the oil change interval excee-
ded warning is displayed, it will also be
necessary to reset the display. In this
Exceeding the maximum
engine oil level
case, the
#
warning light comes on
Under no circumstances
must the maximum fill level
be exceeded: risk of damage to the
engine and catalytic converter.
for approximately 5 seconds to confirm
the reset.
If the oil level exceeds the maximum
level, do not start your vehicle.
Contact an authorised dealer.
The engine may be hot
during operations in close
proximity. In addition, the
engine cooling fan may
Never run the engine in an
enclosed space as exhaust
gases are poisonous.
come on at any moment.
Risk of injury.
4.6