WIPER BLADES: REPLACEMENT
The stalk in the off position (deactivat-
ed):
Check the condition of the
wiper blades. You are re-
sponsible for their service
– In frosty weather,
make sure that the wiper
blades are not stuck by
ice (to avoid the risk of the motor
overheating).
– lift the wiper arm 6;
– rotate the rear screen wiper blade 5
(movement C ) until it unclips;
– release the rear screen wiper blade
5 by pulling it.
life:
– clean the blades and the wind-
screen regularly with soapy water;
– do not use them when the wind-
screen is dry;
– separate them from the wind-
screen when they have not been
used for a long time.
– Check the condition of the
wiper blades.
Refitting
To refit the wiper blade, proceed in the
reverse order to removal. Make sure
that the blade is correctly locked in po-
sition.
Replace the wiper blades as soon
as they begin to lose efficiency
(approximately once a year).
Whilst changing the blade, take
care not to drop the arm onto the
window after it has been removed
as this may break the window.
Check the condition of the
wiper blades. You are re-
sponsible for their service
life:
6
Replacing the rear screen wiper
blade 5
– clean the blades and the wind-
screen regularly with soapy water;
– do not use them when the wind-
screen is dry;
– separate them from the wind-
screen when they have not been
used for a long time.
Before changing the rear
wiper blade, make sure
the stalk is in the off po-
sition (deactivated).
Risk of injury.
358 - Practical advice
English 
