REAR HEADRESTS
B
A
B
A
C
1
Removing the headrests A or B
Position for using the headrest B
(depending on the vehicle)
When the headrest is set at the
lowest position (position C), this is
for storage only: it should not be in
this position when a seat is occupied.
Raise the headrest as far as it will go,
then press button 1 and remove the
headrest.
Lift the headrest to maximum height,
then lower it until it locks.
Adjusting the height of the
headrest B
Storage position for the headrest B
(depending on the vehicle)
(depending on the vehicle)
Press the button 1 and lower the head-
Press the button 1 and simultaneously
rest completely.
slide the headrest to the desired height.
The headrest is a safety
component. Ensure that it is
fitted and in the correct po-
sition: the top of your head
should be in line with the top of the
headrest.
Refitting the headrests A or B
Insert the rods in the holes, press
button 1, lower the headrest and check
that it is securely in place.
3.32
English 
