Get Your comfort -> ROOF BARS Guide for Dacia Sandero 4 Door Third Generation (2021-2026)

ROOF BARS (1/4)

4

2

1

C

B

A

2

3

2

6

– raise the bars 3 and 4 and fit them

in transverse position 5. To do this,

place the bar 3 (movement B) in the

front position, then place the bar 4

(movement C) in the rear position.

Modular roof bars

If the vehicle is equipped, this device

enables you to position the roof bars

in either longitudinal or transverse po-

sition.

3

4

Note: Make sure that bars 3 and 4 are

correctly positioned according to the di-

rection shown on each mark 6 located

on the mountings at each end of the

bars.

To place the bars in the transverse

position:

– Unclip the rotary covers 1 and put

them in the vertical position (move-

ment A);

– loosen the bolts 2 using the torque

wrench 7 (see following pages) lo-

cated in the glove box;

Maximum permissible load on

roof rack ➥ 6.8.

5

3.43

ROOF BARS (2/4)

D

7

D

E

2

E

8

9

– use the 7 tool to tighten the bolts 2:

marks D and E located on the tool

should be out-of-synch (mark 8);

– tighten the bolts 2 as far as possible

using the tool 7 until marks D and E

located on the tool 7 are parallel

(mark 9);

Roof bars in the transverse

position

It is strictly forbidden to place the

roof bars in the transverse position

(carrying position) when entering a

roller-type car wash.

The maximum speed must be lim-

ited to 80 mph (130 km/h).

– re-clip the rotary covers 1.

Note: bars 3 and 4 are not interchange-

able.

Make sure that the two

modular roof bars are cor-

rectly position and locked.

3.44

ROOF BARS (3/4)

F

When not using the bars in trans-

verse position, refit the bars in lon-

gitudinal position in order to opti-

mise fuel consumption and avoid air

noise.

In the event of loss, contact an ap-

proved dealer to obtain the bolts 2

and tool 7.

QR code "Modular roof bars" F

Use the QR code to access a video

online.

Note: this video is not a substitute

for the vehicle user manual.

The modular roof bars are

originally assembled and

approved by our Technical

Department.

Check that the objects and/

or accessories (bike rack,

roof box etc.) fitted to the

modular roof bars are cor-

rectly positioned, evenly distributed

and secured.

They are supplied with bolts 2 and

tool 7. These must only be used for

attaching the roof bars to the vehi-

cle.

3.45

ROOF BARS (4/4)

Precautions during use

Handling the tailgate

Before handling the tailgate, check the

objects and/or accessories (bike rack,

roof box, etc.) fitted to the roof bars:

these must be correctly positioned and

secured, so as not to hinder the opera-

tion of the tailgate.

10

For information on the range of

equipment adapted to your vehi-

cle, we advise you to consult an ap-

proved Dealer. Refer to the manu-

facturer’s instructions for information

on how to fit and operate the equip-

ment.

Please keep these instructions with

the rest of the vehicle documenta-

tion.

Longitudinal roof bars

If fitted on the vehicle, you can trans-

port luggage or additional equipment

(bike racks, ski racks, etc):

Maximum permissible load on

roof rack ➥ 6.8.

– On a roof rack;

– on transverse roof bars fitted onto

the longitudinal roof bars 10;

– directly onto the longitudinal roof

bars.

The attaching of any carry-

ing device (bike rack, lug-

gage box, etc.) resting on

the luggage compartment

lid is prohibited. To install a carrying

device on your vehicle, contact an

Approved Dealer.

It is forbidden to fit longitudinal roof

bars on vehicles which are not origi-

nally equipped with them.

3.46

Your comfort -> ROOF BARS for Your Dacia Sandero 4 Door Third Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals