Get Safety -> i-Size child seats Guide for DS 3 Crossback 4 Door First Generation (2018-2022)

Safety

Rear seats

Recommended ISOFIX child seats

"RÖMER Duo Plus ISOFIX"

(size category: B1)

This system prevents the child seat from tipping

forward in the event of a front impact.

This ISOFIX mounting system provides fast,

reliable and safe fitting of the child seat in the

vehicle.

To secure the child seat to the TOP TETHER:

►ꢀ Remove and stow the head restraint before

installing the child seat on this seat (refit it once

the child seat has been removed).

►ꢀ Pass the upper strap of the child seat behind

the seat backrest, between the head restraint

rods.

►ꢀ Secure the upper strap hook to ring B.

►ꢀ Tighten the upper strap.

Also consult the user guide from the child

seat’s manufacturer to find out how to

install and remove the seat.

Group 1: from 9 to 18 kg

Suitable for forward-facing installation only.

Attached to rings A and ring B, referred to as

TOP TETHER, using an upper strap.

Three seat body angles: sitting, reclining, lying

down.

This child seat can also be used in seat

positions not equipped with ISOFIX mountings.

In this case, it must be secured to the vehicle's

seat by the three-point seat belt. Adjust the

front seat of the vehicle so that the child's feet

do not touch the backrest.

"RÖMER Baby-Safe Plus and its ISOFIX base"

(size category: E)

Group 0+: from birth to 13 kg

Installed "rearward facing" using an ISOFIX

base which is attached to rings A.

The base has a support leg, height-adjustable,

which rests on the vehicle's floor.

This child seat can also be secured with a seat

belt. In this case, only the shell is used and

attached to the vehicle seat using the three-

point seat belt.

When fitting an ISOFIX child seat to the

left-hand rear seat of the bench seat,

before fitting the seat, first move the centre

rear seat belt towards the middle of the

vehicle, so as to avoid the seat interfering with

the operation of the seat belt.

i-Size child seats

i-Size child seats have two latches that engage on

the two rings A.

These i-Size child seats also have:

– either an upper strap that is attached to ring B,

– or a support leg that rests on the vehicle floor,

compatible with the approved i-Size seat position,

the role of which is to prevent the child seat from

tipping forward in the event of a collision.

For more information on the ISOFIX mountings,

refer to the corresponding section.

An incorrectly installed child seat

compromises the child's safety in the

event of an accident.

Strictly observe the fitting instructions

provided in the user guide supplied with the

child seat.

"RÖMER Duo Plus ISOFIX"

(size category: B1)

Group 1: from 9 to 18 kg

For information about the installation

possibilities for ISOFIX child seats in your

vehicle, refer to the summary table.

Safety

seats secured using the seat belt and universally

approved (a) as well as the largest ISOFIX and

i-Size child seats at the positions fitted with

ISOFIX anchoring points in the vehicle.

Installing ISOFIX and i-Size

universal child seats

In compliance with European regulations, this

table indicates the possibilities of installing child

Seat number

Front seats

Rear seats

Front passenger airbag

Deactivated “OFF”

Activated “ON” (c)

(b)

Position compatible with a universal child

yes (d) (f)

yes

yes (e)

yes

seat (a)

Position compatible with an i-Size child seat

yes

Position equipped with a TOP TETHER

anchorage

"Carrycot" type child seat

yes (g)

yes

(g)

"Rearward facing" ISOFIX child seat

"Forward facing" ISOFIX child seat

Booster child seat

R3 (h) (i)

Safety

Rules:

Key

(h) Adjust the driver's seat to the highest

– A position that is i-Size compatible is also

compatible for R1, R2 and F2X, F2, B2.

– A position that is R3 compatible is also

compatible for R1 and R2.

Seat position where the installation of a

child seat is forbidden.

Front passenger airbag deactivated.

position.

(i) Adjust the front passenger seat to the fully

forward position.

– A position that is F3 compatible is also

compatible for F2X and F2.

Front passenger airbag activated.

– A position that is B3 compatible is also

compatible for B2.

Seat position suitable for the installation

of a child seat secured using the seat belt

and universally approved "rearward facing" and/

or "forward facing".

(a) Universal child seat: child seat that can be

installed in all vehicles using the seat belt.

Seat position suitable for the installation a

child seat secured using the seat belt and

universally approved "forward facing".

Seat position where securing an i-Size

child seat is authorised.

Seat position where securing a "forward

facing" i-Size child seat is authorised.

Presence of a TOP TETHER anchoring point

at the rear of the backrest, authorising the

attachment of a universal ISOFIX "forward

facing" child seat.

(b) To install a "rearward facing" at this seat

position, the front passenger airbag must be

deactivated "OFF" .

authorised at this seat position with the front

passenger airbag activated "ON".

(d) For a seat with height adjustment, adjust

the seat to the highest position and move it

fully back.

Presence of a TOP TETHER anchoring point

at the rear of the backrest, authorising the

attachment of a "forward facing" universal

ISOFIX child seat.

(e) Never install a child seat with a support leg

on the centre rear passenger seat.

(f) For a seat without height adjustment, the

backrest must be upright.

"Rearward facing" ISOFIX child seat:

(g) Installing a “Carrycot” type child seat on

this seat may prevent the installation of

additional child seats in the rear.

–

R1: ISOFIX child seat for baby.

R2: ISOFIX reduced size child seat.

R3: ISOFIX large size child seat.

"Forward facing" ISOFIX child seat:

Safety -> i-Size child seats for Your DS 3 Crossback 4 Door First Generation (2018-2022)

Related Topics

Safety

Popular Owner Manuals

Latest Owner Manuals