Access -> Electric windows for Your DS 7 Crossback 4 Door First Generation (2017-2022)

39  
Access  
02  
►ꢀ Switch on the ignition; this stops the alarm.  
The indicator lamp in the button goes off.  
Automatic operation  
Electric windows  
►ꢀ To open/close the window, press/pull the  
switch past its resistance point: the window  
opens/closes completely when the switch is  
released.  
Locking the vehicle without  
activating the alarm  
►ꢀ Lock or deadlock the vehicle using the key  
(integral to the remote control) in the driver's door  
lock.  
Operating the switch again stops the movement  
of the window.  
Window controls remain operational for  
approximately 45 seconds after switching  
off the ignition or after locking the vehicle.  
After that time, the controls are disabled.  
To reactivate them, switch on the ignition or  
unlock the vehicle.  
Automatic activation  
(Depending on version)  
The system is activated automatically 2 minutes  
after the last door or the boot is closed.  
►ꢀ To avoid triggering the alarm on entering the  
vehicle, first press the unlocking button on the  
remote control or unlock the vehicle using the  
“Keyless Entry and Starting” system.  
1. Left-hand front.  
2. Right-hand front.  
3. Left-hand rear.  
4. Right-hand rear.  
5. Deactivation of the electric window controls  
located at the rear seats.  
Deactivation of the rear door opening controls  
(electric child lock)*.  
Anti-pinch  
If the window meets an obstacle while rising, it  
stops and immediately partially lowers again.  
Malfunction  
Deactivation of the rear  
controls for the rear electric  
windows  
For children's safety, press switch 5 to  
deactivate the rear electric windows  
controls.  
The indicator lamp for the button comes on,  
accompanied by a message confirming activation.  
With the ignition on, it remains lit, as long as the  
child lock remains activated.  
When the ignition is switched on, fixed  
illumination of the red indicator lamp in the  
button indicates a malfunction of the system.  
Have it checked by a dealer or a qualified  
workshop.  
Manual operation  
►ꢀ To open/close the window, press/pull the  
switch without passing the point of resistance;  
the window stops as soon as the switch is  
released.  
* Depending on version.  
40  
Access  
02  
Use of the rear electric windows from the driver's  
controls remains possible.  
It is important to ensure that passengers use  
the electric windows correctly.  
Pay particular attention to children when  
operating windows.  
Be aware of passengers and/or other persons  
present when closing windows using the key or  
the "Keyless Entry and Starting" system.  
The sunroof or blind can be operated when the  
ignition is turned on (if the battery is charged  
enough), with the engine running, in STOP mode  
of Stop & Start, and up to 45 seconds after turning  
off the ignition or after locking the vehicle.  
For versions fitted with an electric child  
lock, this control also deactivates the  
interior rear door controls.  
For more information on the Child lock, refer to  
the corresponding section.  
Precautions  
Do not put your head or arms through the  
sunroof when driving - risk of serious  
injury!  
Reinitialising the electric  
windows  
After reconnecting the battery, or in the event  
of abnormal window movement, the anti-pinch  
function must be reinitialised.  
Panoramic sunroof  
The panoramic sunroof consists of a movable  
glass panel that slides over the roof and a blind  
that can be opened independently. Opening the  
sunroof automatically opens the blind.  
Ensure that any luggage or accessories  
carried on the roof bars does not interfere  
with the movement of the sunroof.  
Do not place heavy loads on the movable glass  
panel of the sunroof.  
►ꢀ To operate the panoramic sunroof or the blind,  
use the buttons in the roof console.  
The anti-pinch function is disabled during the  
following sequence of operations.  
For each window:  
If the sunroof is wet, following a shower  
or washing the vehicle, wait until it is  
completely dry before opening.  
Do not operate the sunroof if it is covered by  
snow or ice - risk of damage!  
►ꢀ Lower the window fully, then raise it; it will  
rise in steps of a few centimetres each time the  
control is pressed. Repeat the operation until the  
window is fully closed.  
►ꢀ Continue to pull the control upwards for at  
least one second after the window reaches the  
closed position.  
Use only plastic scrapers to remove snow or  
ice from the sunroof.  
If an electric window meets an obstacle  
during operation, the movement of the  
window must be reversed. To do this, press the  
relevant switch.  
When the driver operates the passengers’  
electric window switches, it is important to  
ensure that nothing can prevent the window  
from closing properly.  
Check the condition of the sunroof seals  
regularly (presence of dust or deposits,  
dead leaves, etc.).  
If using a car wash, check that the roof is  
correctly closed in advance and keep the  
tip of the high-pressure lance at least 30  
centimetres from the seals.  
A. Sunroof control  
B. Sunroof blind control