Get NAVIGATION Guide for DS 7 4 Door First Generation (2017-2026)

219

NAVIGATION

11

– Watching a video (the video stops when the

vehicle starts to move again).

– Changing the system settings and

configuration.

Increase or decrease the volume using the wheel

NAVIGATION

or the "plus" or "minus" buttons (depending on

the equipment).

Use the menu buttons on either side of or below

the touch screen for access to the menus, then

press the virtual buttons in the touch screen.

Display the rolling menus at any time by pressing

the screen briefly with three fingers.

All of the touch areas of the screen are white.

Press the back arrow to go back a level.

Press "OK" to confirm.

AM and DAB radio are not available on

Hybrid vehicles.

The system is protected so that it only

operates in the vehicle.

The message Energy economy mode is

displayed when the system is about to go into

standby.

The touch screen is of the "capacitive"

type.

GPS navigation - Applications

- Multimedia audio system -

Bluetooth^®telephone

To clean the screen, use a soft, non-abrasive

cloth (e.g. spectacles cloth) with no additional

product.

System and map updates can be

downloaded from the Brand's website.

The update procedure is also available there.

Do not use sharp objects on the screen.

Do not touch the screen with wet hands.

The functions and settings described vary

according to the vehicle version and

The system’s Open Source Software (OSS)

source codes are available at the

following addresses:

Certain information is displayed permanently

in the side bars or in the upper bar of the touch

screen (depending on equipment):

configuration, as well as the country of sale.

For safety reasons and because they

require sustained attention by the driver,

the following operations must be carried out

with the vehicle stationary and the ignition on:

– Pairing the smartphone with the system via

Bluetooth.

– Air conditioning status information

(depending on version), and direct access to the

corresponding menu.

– Go directly to the audio source selection option,

to view the list of radio stations (or list of titles

depending on the source).

First steps

With the engine running, a press mutes the

– Using the smartphone.

– Go to the "Notifications" of messages, emails,

map updates and, depending on the services, the

navigation notifications.

– Connecting to the CarPlay^®or Android

Auto applications (certain applications stop

displaying when the vehicle is moving).

sound.

With the ignition off, a press turns the system on.

– Go to the settings for the touch screen and the

digital instrument panel.

220

NAVIGATION

11

Audio source selection (depending on equipment):

– FM/DAB/AM radio stations (depending on

equipment).

standby mode (with the screen and sound off)

for 5 minutes or more.

Radio (rotate): automatic search for the

previous/next station.

The system will resume normal operation

when the temperature in the passenger

compartment has dropped.

Media (rotate): previous/next track, move

through a list.

– Telephone connected via Bluetooth and

Bluetooth multimedia broadcast (streaming).

– USB memory stick.

Short press: confirm a selection; if nothing

selected, access presets.

– Media player connected via the auxiliary socket

(depending on equipment).

Radio: display the list of stations.

Media: display the list of tracks.

Radio (press and hold): update the list of detected

stations.

Steering mounted controls

– Video (depending on equipment).

Voice control:

This control is located on the steering

wheel or at the end of the lighting control stalk

(depending on equipment).

Menus

Short press, system voice control.

Long press, voice commands from smartphone or

CarPlay^®, Android Auto via the system.

Increase volume.

Connected navigation

Decrease volume.

Mute by pressing the volume increase and

decrease buttons simultaneously (depending on

equipment).

In the "Settings" menu, it is possible to

create a profile for an individual or for a

group of people with shared interests, and

configure a wide range of settings (radio

presets, audio settings, navigation history,

favourite contacts, etc.). Settings are applied

automatically.

Restore the sound by pressing one of the two

volume buttons.

Media (short press): change the

multimedia source.

Enter navigation settings and choose a

destination.

Telephone (short press): start telephone

call.

Use real-time services, depending on equipment.

Call in progress (short press): access telephone

menu.

In very hot conditions, the volume may be

limited to protect the system. It may enter

Telephone (long press): reject an incoming call,

end call; when no call is in progress, access

telephone menu.

221

NAVIGATION

11

Applications

Telephone

Vehicle

Run certain applications from a

smartphone connected via CarPlay^®or

Android Auto.

Connect a telephone via Bluetooth^®, read

messages and emails and send quick

messages.

Activate, deactivate or configure certain

vehicle functions.

Check the status of the Bluetooth^®and Wi-Fi

Air conditioning

Settings

connections.

Radio Media

18,5

21,5

87.5 MHz

Manage various temperature and air flow

settings.

Configure a personal profile and/or

configure the sound (balance, ambience,

etc.) and the display (language, units, date, time,

etc.).

Select an audio source or radio station, or

display photographs.

222

NAVIGATION

11

Example of a "voice command" for the radio and

media:

Voice commands

"Play artist Madonna"

Steering wheel-mounted

controls

Example of a "voice command" for the telephone:

"Call David Miller"

Voice commands:

The voice commands, with a choice of 17

languages (Arabic, Brazilian, Czech,

Danish, Dutch, English, Farsi, French, German,

Italian, Norwegian, Polish, Portuguese,

Russian, Spanish, Swedish, Turkish), are made

using the language previously chosen and set

in the system.

Voice commands can be issued from any

screen page after a short press on the "Voice

commands" button located on the steering

wheel or at the end of the lighting control stalk

(depending on equipment), as long as there is no

telephone call in progress.

A number of commands are available when a

menu is selected.

For some voice commands, there are

alternative synonyms.

To ensure that voice commands are

always recognised by the system, please

follow these recommendations:

Example: Guide to / Navigate to / Go to / ...

The voice commands in Arabic for: "Navigate

to address" and "Display POI in the city", are

not available.

–

use natural language in a normal tone

without breaking up words or raising your

voice.

– always wait for the "beep" (audible signal)

before speaking.

Information - Using the system

– for best results, closing the windows and

sunroof is recommended, to avoid extraneous

interference (depending on version).

– before issuing a voice command, ask any

other passengers to refrain from speaking.

When voice commands are activated, by

Press the Push To Talk button and tell me

what you'd like after the tone. Remember

briefly pressing the button, help is

displayed on the touch screen, offering various

menus and enabling voice-based interaction with

the system.

you can interrupt me at any time by pressing this

button. If you press it again while I'm waiting for

you to speak, it'll end the conversation. If you

need to start over, say "cancel". If you want to

undo something, say "undo". And to get

First steps

Example of a "voice command" for

information and tips at any time, just say "help". If

you ask to me do something and there's some

information missing that I need, I'll give you some

examples or take you through it step by step.

navigation:

"Navigate to address 11 regent street, London"

223

NAVIGATION

11

There's more information available in "novice"

mode. You can set the dialogue mode to "expert"

when you feel comfortable.

For example, "navigate to address 11 Regent

Street, London", "navigate to contact, John

Miller", or "navigate to intersection of Regent

Street, London". You can specify if it's a preferred

address, or a Point of Interest. For example, say

"navigate to preferred address, Tennis club", or

"navigate to POI Heathrow Airport in London".

Or, you can just say, "navigate home". To see

Points of Interest on a map, you can say things

like "show POI hotels in Banbury". For more

information say "help with points of interest" or

"help with route guidance".

Voice commands

Show POI ''hotel'' at the destination

Show nearby POI petrol station

Global voice commands

Navigate to POI Heathrow Airport in London

Navigate to POI petrol station along the route

Help messages

Voice commands

Set dialogue mode as novice - expert

Select user 1 / Select profile John

Increase temperature

To see points of interest on a map, you can say

things like "show hotels in Banbury", "show

nearby parking", "show hotel at the destination"

or "show petrol station along the route". If you

prefer to navigate directly to a point of interest,

you can say "navigate to nearby petrol station". If

you feel you are not being well understood, try to

say the word "POI" in front of the point of interest.

For example say "navigate to POI restaurant at

the destination".

Decrease temperature

Help messages

To choose a destination, say something like

"navigate to line three" or "select line two". If you

can't find the destination but the street's right,

say for example "select the street in line three".

To move around a displayed list, you can say "next

page" or "previous page". You can undo your last

action and start over by saying "undo", or say

"cancel" to cancel the current action.

There are lots of topics I can help you with.

You can say: "help with phone", "help with

navigation", "help with media" or "help with

radio". For an overview on how to use voice

controls, you can say "help with voice controls".

Say "yes" if I got that right. Otherwise, say "no"

and we'll start that again.

To choose a POI, say something like "select line

2". If you've searched for a Point of Interest

and don't see the one you're after, you can filter

further by saying something like "select POI in line

2", or "select the city in line 3". You can also scroll

through the list by saying "next page" or "previous

page".

Voice commands

"Navigation" voice commands

Tell me the remaining distance

Tell me the remaining time

Tell me the arrival time

Stop route guidance

Voice commands

Navigate home

Navigate to work

Depending on the country, give

destination (address) instructions in the

language configured for the system.

Help messages

Navigate to preferred address, Tennis club

Navigate to contact, John Miller

Navigate to address 11 regent street, London

Help messages

You can say "stop" or "resume route guidance".

To get information about your current route, you

can say "tell me the remaining time", "remaining

distance" or "arrival time". To learn more

To plan a route, say "navigate to" followed by the

address, the contact name or an intersection.

commands, try saying "help with navigation".

224

NAVIGATION

11

What's playing?

Help messages

"Radio Media" voice

commands

"Telephone" voice commands

If there is no telephone connected by

Bluetooth, a voice message announces:

"Please first connect a telephone", and the

voice session is closed.

Voice commands

To choose what you'd like to play, start by saying

"play" and then the item. For example, say "play

song Hey Jude", "play line 3" or "select line 2". You

can undo your last action and start over by saying

"undo", or say "cancel" to cancel the current

action.

Turn on source radio - Streaming Bluetooth - …

Help messages

Voice commands

You can select an audio source by saying "turn on

source" followed by the device name. For example,

"turn on source, Streaming Bluetooth", or "turn on

source, radio". Use the command "play" to specify

the type of music you'd like to hear. You can

choose between "song", "artist", or "album". Just

say something like "play artist, Madonna", "play

song, Hey Jude", or "play album, Thriller".

Voice commands

Call David Miller*

Call voicemail*

Display calls*

Voice commands

Play song Hey Jude

Play artist Madonna

Play album Thriller

Help messages

To make a phone call, say "call" followed by the

contact name, for example: "Call David Miller".

You can also include the phone type, for example:

"Call David Miller at home". To make a call by

number, say "dial" followed by the phone number,

for example, "Dial 107776 835 417". You can check

your voicemail by saying "call voicemail". To send

a text, say "send quick message to", followed

by the contact, and then the name of the quick

message you'd like to send. For example, "send

quick message to David Miller, I'll be late". To

display the list of calls, say "display calls". For

more information on SMS, you can say "help with

texting".

I'm not sure what you'd like to play. Please say

"play" and then a song title, an album title, or

an artist name. For example, say "play song Hey

Jude", "play artist Madonna" or "play album

Thriller". To select a line number from the display,

say "select line two". To move around a displayed

list, you can say "next page" or "previous page".

You can undo your last action and start over

by saying "undo", or say "cancel" to cancel the

current action.

Tune to channel BBC Radio 2

Tune to 98.5 FM

Tune to preset number five

Help messages

You can pick a radio station by saying "tune to"

and the station name or frequency. For example

"tune to channel Talksport" or "tune to 98.5 FM".

To listen to a preset radio station, say for example

"tune to preset number five".

Media voice commands are available only

with a USB connection.

To choose a contact, say something like "select

line three". To move around the list say "next

Voice commands

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding download

has been performed.

225

NAVIGATION

11

page" or "previous page". You can undo your last

action and start over by saying "undo", or say

"cancel" to cancel the current action.

and start over by saying "undo", or say "cancel" to

cancel the current action.

The system only sends pre-recorded

"Quick messages".

Voice commands

"Text message" voice

commands

Send SMS to John Miller, I'm just arriving

Send SMS to David Miller at the office, don't wait

for me

Navigation

Choice of a destination

If there is no telephone connected by

Bluetooth, a voice message announces:

"Please first connect a telephone", and the

voice session is closed.

Help messages

To a new destination

Please say "call" or "send quick message to", and

then select a line from the list. To move around

a list shown on the display, you can say "go to

start", "go to end", "next page" or "previous

page". You can undo your last action and start

over by saying "undo", or say "cancel" to cancel

the current action.

Intuitive method:

Press Navigation to display the main page.

The "Text messages" voice commands

function allows you to dictate and send an

SMS.

Press "Search…".

Enter an address or the key words for the

Dictate the text, taking care to pause briefly

between each word.

destination.

Voice commands

Press "OK" to select the "Guidance

When you have finished, the voice recognition

system will automatically generate an SMS.

criteria".

Or

Listen to most recent message*

Help messages

Guided method:

Voice commands

To hear your last message, you can say "listen to

most recent message". When you want to send a

text, there's a set of quick messages ready for you

to use. Just use the quick message name and say

something like "send quick message to Bill Carter,

I'll be late". Check the phone menu for the names

of the supported messages.

In order to be able to use the navigation,

you must enter the "City", the "Street"

(suggestions are displayed automatically

when you begin typing), then enter the

"Number" using the virtual keypad, or select an

address from the "Contact" list or the address

"History".

Send quick message to Bill Carter, I'll be late

Help messages

From the list of quick messages, say the name of

the one you'd like to send. To move around the list

you can say "go to start", "go to end", "next page"

or "previous page". You can undo your last action

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and the corresponding download

has been performed.

226

NAVIGATION

11

If you do not confirm the number, the

navigation system will show one end of

the street.

Press the "MENU" button to access the secondary

page.

Select "My destinations".

Press the "MENU" button to access the secondary

Select the "Recent” tab.

Select the "Contact” tab.

Select a contact in the list to start guided

navigation.

page.

Select the address chosen in the list to display the

"Guidance criteria”.

Select "Enter address".

Press "OK" to start guided navigation.

Then

To points of interest (POI)

Guided method:

Select the "Country".

Select "Position" to see the point of

Points of interest (POI) are listed in different

categories.

arrival on the map.

Select the keyboard “language”.

Press Navigation to display the main page.

Change the keyboard "type" according to

the selected "language": ABCDE; AZERTY;

QWERTY or QWERTZ.

To "Home" or "My work"

Press the "MENU" button to access the secondary

Press Navigation to display the main page.

page.

Enter the "City", the "Street" and the

"Number", and confirm by pressing on the

displayed suggestions.

Select "Points of interest".

Press the "MENU" button to access the secondary

page.

Select the "Travel", "leisure",

"Commercial", "Public" or "Geographic”

tab.

Select "My destinations".

Press "OK" to select the "Guidance

criteria".

Select the "Preferred” tab.

Select "Home".

And/or

Or

Select "See on map" to choose the

"Guidance criteria".

Select "Search" to enter the name and

address of a POI.

Or

Press "OK" to start guided navigation.

Press "OK" to calculate the route.

Select "My work".

Or

Zoom in/out using the touch buttons or

with two fingers on the screen.

Or

Intuitive method:

Select a preset favourite destination.

You can only select this method of using

the service if a network connection is

To a contact

To a recent destination

Press Navigation to display the main page.

active; this may be either a "network

Press Navigation to display the main page.

connection provided by the vehicle", if you use

227

NAVIGATION

11

the DS CONNECT BOX solution, or else a

"network connection provided by the user" via

a smartphone,

Explore the map by sliding a finger on the screen.

Select the destination by pressing on the map.

Tap the screen to place a marker and

display the sub-menu.

Press this button to save the displayed

address.

OR

In both cases, the system is automatically

connected to the Internet, if network coverage

permits.

Press this button to enter the "Latitude"

Press this button to start guided

navigation.

value using the virtual keypad.

And

Or

Press this button to enter the "Longitude"

Press Navigation to display the main page.

Press this button to save the displayed

address.

value using the virtual keypad.

Press the "MENU" button to access the secondary

TMC (Traffic Message

Channel)

A long press on a point opens a list of

nearby POIs.

page.

Select "Search".

Available in some countries.

TMC (Traffic Message Channel) messages

are based on a European standard for traffic

information broadcasting via the RDS system on

FM radio, sending traffic information in real time.

The TMC information is then displayed on a GPS

Navigation system map and taken into account

straight away when routes are calculated, to

avoid accidents, traffic jams and closed roads.

Press on the mode shown in the bottom right of

the screen (On-Board or Connected) to change the

"Database".

To GPS coordinates

Press Navigation to display the main page.

Select the "Database" in "On-Board" mode

(integrated into the map), or in

Explore the map by sliding a finger on the screen.

Touch the screen with a finger to go to the next

image.

"Connected" mode (connected to the Internet).

Press the back arrow to confirm.

Press this button to display the world map.

Using the grid, select the desired country

or region by zooming.

Enter an address or the key words for the

destination (POI).

Danger zone alerts may or may not be

displayed, depending on the applicable

legislation and subscription to the

corresponding service.

Press this button to display or enter the

GPS coordinates.

Press "OK" to start the search.

A marker is displayed in the middle of the

screen, with the "Latitude" and

"Longitude" coordinates.

Select the "On the route", "Around the

vehicle" or "At destination" tab to refine

your search.

Choose the type of coordinates:

DMS for: Degrees, Minutes, Seconds.

DD for: Degrees, Decimals.

Select the desired address to calculate the route.

To a point on the map

Press this button to start guided

navigation.

Press Navigation to display the main page.

Or

228

NAVIGATION

11

USB connection

Connect the USB cable.

The smartphone charges when connected

by the USB cable.

Bluetooth connection

Activate the Bluetooth function on the

Press "OK" to establish a connection

Connected navigation

between the smartphone and the vehicle’s

system.

Connected navigation

connection

Usage restrictions:

With CarPlay^®, connection sharing is only

available with a Wi-Fi connection.

The quality of services depends on the quality

of the network connection.

Depending on version, vehicle trim level and

telephone and ensure that it is visible to all

(see the "Connect-App" section).

Wi-Fi connection

subscription to online services and options.

Network connection provided by the

vehicle

Select a Wi-Fi network detected by the

system and connect to it.

Authorize sending information

With the DS CONNECT BOX solution, the

system is automatically connected to the

Internet and connected services, and does not

require the user to provide a connection via their

smartphone.

Press Settings to display the main page.

This function is only available if it has

been activated either via the

Press the "OPTIONS" button to access the

secondary page.

"Notifications" or via the "Applications" menu.

Press "Notifications".

OR

Select "System configuration".

Network connection provided by the user

Select Wi-Fi to activate it.

Select the "Private mode" tab.

OR

Press Connect-App to display the main

page.

Press "Notifications".

For the list of compatible smartphones,

visit the Brand's website in your country.

Press the "OPTIONS" button to access the

secondary page.

Press "Private mode".

Activate and enter settings for sharing the

smartphone connection.

Select "Wi-Fi network connection".

THEN

Activate or deactivate:

Select the "Secured", "Not secured" or

"Stored” tab.

As processes and standards are

constantly changing, we recommend you

update the smartphone operating system as

well as the date and time on the smartphone

and system, to ensure that the communication

process between the smartphone and the

system functions correctly.

– "No data sharing except for company vehicles".

– "Only data sharing"

Select a network.

– "Sharing data and vehicle position"

Using the virtual keypad, enter the "Key"

network Wi-Fi and the "Password".

229

NAVIGATION

11

Danger zone alerts may or may not be

displayed, depending on the applicable

legislation and subscription to the

corresponding service.

Press "OK" to save and send the

Settings specific to connected

navigation

information.

Press Navigation to display the main page.

Displaying fuel information

Press Navigation to display the main page.

When "TOMTOM TRAFFIC” appears, the

services are available.

Press the "MENU" button to access the secondary

page.

Press this button to display the list of

services.

Select "Settings".

The services offered with connected

navigation are as follows.

A Connected Services pack:

– Weather,

Press "POI on map" to display the list of

points of interest.

Select the "Map” tab.

Press one of the buttons to search for

"Stations".

Activate or deactivate:

– Filling stations,

– "Allow declaration of danger zones".

– "Guidance to final destination on foot".

These settings must be configured for each

profile.

Activate/deactivate "Stations".

– Car park,

– Traffic,

Press this button to display a secondary

page.

– POI local search.

A Danger area pack (optional).

Press “OK” to confirm your selection.

Select the "Settings” tab.

Select the "Alerts” tab.

Declaration: "Risk areas alert"

Select the desired fuel.

To send information about danger zones,

select the option:Allow declaration of

danger zones

Activate or deactivate:

Press "OK" to save.

– "Advise of car park nearby".

– "Filling station alert".

Displaying charging station

details

Press Navigation to display the main page.

– “Risk areas alert" then press the warning icon

(triangle) to configure the alerts.

– "Give an audible warning".

Press the "Declare a new danger zone"

button located in the side bars or the upper

bar of the touch screen (depending on

equipment).

Press Navigation to display the main page.

– "Advise proximity of POI 1".

Press this button to display the list of

services.

– "Advise proximity of POI 2".

Press “OK” to confirm your selection.

Select the "Type” option to select the type

of "Danger area".

Press "POI on map" to display the list of

points of interest.

Select the ""Speed" option and enter it

using the virtual keypad.

The "Notifications", located in the upper

bar, can be accessed at any time.

230

NAVIGATION

11

CarPlay^®smartphone

connection

Press one of the buttons to search for

Applications

USB sockets

"Stations".

Activate/deactivate "Stations".

Depending on country.

Depending on equipment, for more information

on the USB sockets compatible with CarPlay^®or

Android Auto applications, refer to the "Ease of

use and comfort" section.

Press this button to display a secondary

page.

On connecting the USB cable, the CarPlay^®

function deactivates the system's

Bluetooth^®mode.

Select the "Settings" tab.

The "CarPlay" function requires the use of

a compatible smartphone and compatible

applications.

For the list of compatible smartphones,

visit the Manufacturer's website in your

country.

Select the desired connector type.

Press "OK" to save.

Connect the USB cable. The smartphone

charges when connected by the USB cable.

Press "Telephone" to display the CarPlay^®

interface.

Synchronising a smartphone enables

users to display applications that support

the smartphone’s CarPlay^®or Android Auto

technology on the vehicle’s screen. For

CarPlay^®technology, the CarPlay^®function

must first be activated on the smartphone.

Unlock the smartphone for the communication

process between the smartphone and the

system to work.

Displaying weather

information

Or

Press Navigation to display the main page.

Connect the USB cable. The smartphone

charges when connected by the USB cable.

From the system, press "Applications" to

display the main page.

Press this button to display the list of

services.

Select "View map".

Press "Connectivity" to access the "CarPlay^®”

As principles and standards are constantly

changing, we recommend keeping the

smartphone's operating system up-to-date,

together with the date and time on the

smartphone and the system.

function.

Select "Weather".

Press "CarPlay" to display the CarPlay^®

interface.

Press this button to display basic

information.

When the USB cable is disconnected and

the ignition is switched off then back on,

the system will not automatically switch to

Radio Media mode; the source must be

changed manually.

Press this button to display detailed

weather information.

Connectivity

The temperature displayed at 6 a.m. will

be the maximum temperature for the day.

The temperature displayed at 6 p.m. will be the

minimum temperature for the night.

Press Applications to display the main

page.

Press "Connectivity" to access the CarPlay^®or

Android Auto functions.

231

NAVIGATION

11

There may be a pause before applications

become available, depending on the

quality of the network.

service provider to check which services are

available.

Android Auto smartphone

connection

Depending on country.

The Bluetooth function must be activated

and the smartphone configured as

"Visible to all".

Install the "Android Auto" application on

the smartphone via "Google Play".

The "Android Auto" function requires the use

of a compatible smartphone and compatible

applications.

Car Apps

Press Applications to display the main

page.

To complete the pairing, whichever procedure is

used (from the smartphone or from the system),

ensure that the code is the same in the system

and in the smartphone.

Press "Car Apps" to display the applications home

page.

Connect the USB cable. The smartphone

charges when connected by the USB cable.

From the system, press "Applications" to

display the main page.

Internet Browser

If the pairing procedure fails, we

recommend deactivating and then

reactivating the Bluetooth function on the

smartphone.

Press Applications to display the main

page.

Press "Connectivity" to access the "Connected

Apps” function.

Press "Connectivity" to access the "Android Auto”

function.

Press "Connected Apps" to display the browser

home page.

Press "Android Auto" to start the

application in the system.

Procedure from the smartphone

Select the country of residence.

During the procedure, several screen

pages relating to certain features are

displayed.

Select the name of the system in the list of

detected devices.

Press "OK" to save and start the browser.

In the system, accept the connection request

from the smartphone.

Accept to start and complete the connection.

Access to the different audio sources remains

available in the margin of the Android Auto

display, using the touch buttons located in the

upper bar.

Connection to the internet is via one of

the network connections provided by the

vehicle or the user.

Procedure from the system

Press Connect-App to display the main

page.

Access to the menus for the system is possible at

any time using the dedicated buttons.

Press the "OPTIONS" button to access the

secondary page.

Bluetooth connection^®

Press "Bluetooth connection".

In Android Auto mode, the function that

displays rolling menus by briefly pressing

the screen with three fingers is disabled.

The services available depend on the

network, the SIM card and the

Select "Search".

The list of detected smartphones is

displayed.

compatibility of the Bluetooth devices used.

Consult the smartphone user guide and the

232

NAVIGATION

11

Select the name of the chosen smartphone

Select "Wi-Fi network connection".

possible, the use of a security code or a

complex password is recommended.

in the list.

Select the "Secured", "Not secured" or

"Stored” tab.

Depending on the type of smartphone, you

may by prompted to accept the transfer of

contacts and messages.

Managing connections

Select a network.

Press Connect-App to display the main

page.

Using the virtual keypad , enter the Wi-Fi

network "Key" and "Password".

Press the "OPTIONS" button to access the

secondary page.

Connection sharing

Press "OK" to establish the connection.

The system offers to connect the smartphone

with 3 profiles:

Select "Manage connection".

– "Telephone" (hands-free kit, telephone only),

– “Streaming" (streaming: wireless playing of

audio files on the smartphone),

The Wi-Fi connection and Wi-Fi

connection sharing are exclusive.

With this function, you can view the access to

connected services, the availability of connected

services and modify the connection mode.

– "Mobile internet data".

Wi-Fi connection sharing

Depending on equipment.

The "Mobile internet data" profile must be

activated for connected navigation (if the

vehicle does not have "Emergency and

assistance call" services), after first activating

smartphone connection sharing.

Radio

Creation of a local Wi-Fi network by the system.

Press Connect-App to display the main

page.

Selecting a station

Press Radio Media to display the main

Press the "OPTIONS" button to access the

secondary page.

page.

Select one or more profiles.

Press "Frequency".

Select "Share Wi-Fi connection".

Press one of the buttons to perform an

automatic search for radio stations.

Or

Press "OK" to confirm.

Select the "Activation" tab to activate or

deactivate Wi-Fi connection sharing.

And/or

Move the slider to manually search for

frequencies up or down.

Or

Wi-Fi connection

Network connection via the smartphone's Wi-Fi.

Press Connect-App to display the main

page.

Select the "Settings" tab to change the system’s

network name and password.

Press "OK" to confirm.

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Press the "OPTIONS" button to access the

secondary page.

To protect against unauthorised access

and to make all systems as secure as

233

NAVIGATION

11

Select "Radio stations" on the secondary

To change the waveband, press "Band…",

displayed at the bottom right of the screen.

Press the "OPTIONS" button to access the

secondary page.

Select "Radio settings".

page.

Press "Frequency".

Activating/Deactivating RDS

RDS, if activated, allows you to continue listening

to the same station by automatic retuning to

alternative frequencies.

Enter the values using the virtual keypad.

First enter the units then click on the

decimals field to enter the figures after the

decimal point.

Select "General".

Activate/deactivate "Display radio text".

Press "OK" to confirm.

Press Radio Media to display the main

page.

Press the "OPTIONS" button to access the

secondary page.

Radio reception may be affected by the

use of electrical equipment not approved

by the Brand, such as a USB charger connected

to the 12 V socket.

Playing TA messages

Select "Radio settings".

The TA (Traffic Announcement) function gives

priority to TA alert messages. To operate, this

function needs good reception of a radio station

that carries this type of message. While traffic

information is being broadcast, the current

media is automatically interrupted so that the

TA message can be heard. Normal play of the

previously playing media resumes at the end of

the message.

Select "General".

The exterior environment (hills, buildings,

tunnels, basement car parks, etc.) may

block reception, including in RDS mode. This

phenomenon is perfectly normal in the context

of radio wave transmission, and in no way

indicative of an audio system malfunction.

Activate/deactivate "Station follow".

Press "OK" to confirm.

RDS station tracking may not be available

nationwide, as many radio stations do not

cover 100 % of the country. This explains the

loss of reception of the station during a

journey.

Select "Announcements".

Presetting a station

Select a radio station or frequency.

(refer to the corresponding section)

Press "Presets".

Activate/deactivate "Traffic

announcement".

Press "OK" to confirm.

Displaying text information

Make a long press on one of the buttons to

preset the station.

The "Radio Text" function displays information

transmitted by the radio station relating to the

station or the currently playing song.

Press Radio Media to display the main

page.

DAB (Digital Audio

Broadcasting) radio

Changing the waveband

Press Radio Media to display the main

page.

Terrestrial Digital Radio

Digital radio provides higher quality sound.

234

NAVIGATION

11

The various "multiplexes/ensembles" offer a

choice of radio stations organised in alphabetical

order.

analogue radio, and in some cases a change in

volume.

Auxiliary socket (AUX)

Depending on equipment

When the digital signal quality is restored, the

system automatically changes back to "DAB".

Connect a portable device (MP3 player,

etc.) to the auxiliary jack socket using an

audio cable (not supplied).

Press Radio Media to display the main

page.

Press “Band …” at the top centre of the screen to

display the "DAB" waveband.

If the "DAB" station being listened to is

not available on “FM” (“FM-DAB" option

shaded), or "FM-DAB auto tracking" is not

activated, the sound will cut out while the

digital signal is too weak.

This source is only available if "Auxiliary input"

has been selected in the audio settings.

First adjust the volume on the portable device (to

a high level). Then adjust the volume of the audio

system.

FM-DAB tracking

“DAB" does not cover 100 % of the territory.

When the digital radio signal is poor, “FM-DAB

auto follow-up" enables you to continue listening

to the same station by automatically switching to

the corresponding FM analogue station (if there

is one).

Controls are managed via the portable device.

Selecting the source

Media

Press Radio Media to display the main

page.

USB port

Insert the USB memory stick into the USB

port or connect the USB device to the USB

port using a suitable cable (not supplied).

Press Radio Media to display the main

page.

Select "SOURCES".

Select the source.

Press the "OPTIONS" button to access the

secondary page.

Watching a video

Depending on equipment/Depending on version/

Select "Radio settings".

To protect the system, do not use a USB

hub.

Depending on country.

Select "General".

Insert a USB memory stick in the USB port.

Activate/deactivate "FM-DAB Follow-up".

The system builds playlists (in temporary

memory); this operation can take from a

few seconds to several minutes at the first

connection.

Video control commands are accessible

only through the touch screen.

Activate/deactivate "Station follow".

Press "OK".

Press Radio Media to display the main

page.

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

Playlists are updated whenever the ignition is

switched off or a USB memory stick is connected.

The audio system memorises these lists, which

will subsequently load faster if they have not been

changed.

Select "SOURCES".

If “FM-DAB auto tracking" is activated,

there may be a time offset of a few

Select Video to start the video.

seconds when the system switches to "FM"

235

NAVIGATION

11

To remove the USB memory stick, press

the pause button to stop the video, then

albums/genres/playlists/audio books/

podcasts).

To avoid reading and display problems, we

recommend choosing file names less than 20

characters long that do not contain any special

characters (e.g. “ ? . ; ù).

remove the memory stick.

The default classification used is by artist. To

modify the classification used, return to the

first level of the menu then select the desired

classification (playlists for example) and

confirm to go down through the menu to the

desired track.

The system can play video files in the MPEG-4 Part

2, MPEG-2, MPEG-1, H.264, H.263, VP8, WMV and

RealVideo formats.

Use only USB memory sticks in FAT32 format (File

Allocation Table).

We recommend using the original USB

cable for the portable device.

Streaming Bluetooth^®

Streaming allows you to listen to the audio feed

The version of software in the audio system may

not be compatible with the generation of the

Apple^®player.

from your smartphone.

The Bluetooth profile must be activated.

First adjust the volume on the portable device (to

a high level).

Telephone

Information and advice

Pairing a Bluetooth^®telephone

Then adjust the volume of the audio system.

If play does not start automatically, it may be

necessary to start the audio playback from the

smartphone.

The system supports USB mass storage devices,

BlackBerry^®devices and Apple^®players via the

USB ports. The adapter cable is not supplied.

Devices are managed using the audio system

controls.

The services available depend on the

network, the SIM card and the

compatibility of the Bluetooth devices used.

Consult the telephone user guide and the

service provider to check which services are

available.

Control is from the portable device or by using the

system's touch buttons.

Other devices, not recognised on connection,

must be connected to the auxiliary socket using

a jack cable (not supplied) or via Bluetooth

streaming, if compatible.

Once connected in streaming mode, the

smartphone is considered to be a media

source.

The Bluetooth function must be activated

and the telephone configured as "Visible

to all” (in the telphone settings).

The audio system will only play audio files with

".wma", ".aac", ".flac", ".ogg" and ".mp3" file

extensions, at bit rates between 32 Kbps and 320

Kbps.

Connecting Apple^®players

Connect the Apple^®player to the USB port using a

suitable cable (not supplied).

To complete the pairing, whichever procedure is

used (from the telephone or from the system),

ensure that the code is the same in the system

and in the telephone.

It also supports VBR (Variable Bit Rate) mode.

No other file types (".mp4", etc.) can be read.

All ".wma" files must be standard WMA 9 files.

The supported sampling rates are 32, 44 and 48

KHz.

Play starts automatically.

Control is via the audio system.

The classifications available are those of

the portable device connected (artists/

If the pairing procedure fails, we

recommend deactivating and then

236

NAVIGATION

11

reactivating the Bluetooth function on the

Select one or more profiles.

Press the "Details" button.

Select one or more profiles.

Press "OK" to confirm.

telephone.

Press "OK" to confirm.

Procedure from the telephone

Depending on the type of telephone, you may by

prompted to accept the transfer of contacts and

messages.

Select the system name in the list of

detected devices.

In the system, accept the connection request

from the telephone.

Managing paired telephones

The ability of the system to connect just

one profile depends on the telephone.

All three profiles may connect by default.

This function lets you connect or disconnect a

device or delete a pairing.

Procedure from the system

Press Telephone to display the main page.

The profiles compatible with the system

are: HFP, OPP, PBAP, A2DP, AVRCP, MAP

and PAN.

Press the "OPTIONS" button to access the

secondary page.

Press "Bluetooth search".

Select "Bluetooth connection" to display

the list of paired devices.

Or

Visit the Brand's website for more information

(compatibility, additional help, etc.).

Select "Search".

The list of detected telephones is

displayed.

Press on the name of the telephone

selected in the list to disconnect it.

Press again to connect it.

Automatic reconnection

Select the name of the chosen telephone

in the list.

On returning to the vehicle, if the last telephone

connected is present again, it is automatically

recognised and within about 30 seconds

after switching on the ignition, the pairing is

established automatically (Bluetooth activated).

To modify the connection profile:

Deleting a telephone

Select the basket at top right of the screen

to display a basket alongside the

telephone chosen.

Connection sharing

The system offers to connect the telephone with

3 profiles:

Press the basket alongside the telephone

chosen to delete it.

– "Telephone" (hands-free kit, telephone only),

– “Streaming" (streaming: wireless playing of

audio files on the telephone),

Press Telephone to display the main page.

Receiving a call

Press the "OPTIONS" button to access the

secondary page.

– "Mobile internet data".

An incoming call is announced by a ring and a

superimposed display in the screen.

Make a short press on the steering

mounted telephone button to accept an

incoming call.

The "Mobile internet data" profile must be

activated for connected navigation, after

first activating smartphone connection

sharing.

Select "Bluetooth connection" to display

the list of paired devices.

237

NAVIGATION

11

And

Or

Select "Contact".

Press "OK" to save.

Make a long press

Select the desired contact from the displayed list.

Select "Call".

Press this button to sort contacts by

Surname+first name or by First

on the steering mounted telephone button

to reject the call.

name+surname.

Calling a recently used number

The "Email" function allows email

addresses to be entered for a contact, but

the system is not able to send emails.

Select "End call" on the touch screen.

Press Telephone to display the main page.

Or

Making a call

Press and hold

Managing messages

Using the telephone is not recommended

the steering mounted telephone button.

Press Telephone to display the main page.

while driving.

Park the vehicle.

Select "Calls".

Press the "OPTIONS" button to access the

secondary page.

Make the call using the steering mounted

controls.

Select the desired contact from the displayed list.

Select "Messages" to display the list of

messages.

It is always possible to make a call

directly from the telephone; as a safety

measure, first park the vehicle.

Calling a new number

Select the "All", "Incoming" or "Sent” tab.

Press Telephone to display the main page.

Select the details of the message chosen

in one of the lists.

Managing contacts/entries

Enter the phone number using the digital

keypad.

Press "Answer" to send a quick message

stored in the system.

Press Telephone to display the main page.

Press "Call" to start the call.

Select "Contact".

Select "Create" to add a new contact.

Calling a contact

Press "Play" to listen to the message.

Press Telephone to display the main page.

Press the "Telephone" tab to enter the

contact’s telephone number(s).

Press the "Address" tab to enter the

contact’s address(es).

Access to "Messages" depends on the

compatibility between the smartphone

and the onboard system.

Or press and hold

the steering mounted telephone button.

Press the "Email" tab to enter the

contact’s email address(es).

Some smartphones retrieve messages or email

messages more slowly than others.

238

NAVIGATION

11

Access to email messages depends on the

compatibility between the smartphone

and the onboard system.

Activate or deactivate "Touch tones", "Volume

linked to speed" and "Auxiliary input".

Managing quick messages

Press Telephone to display the main page.

optimises the sound distribution inside

the passenger compartment.

Press the "OPTIONS" button to access the

secondary page.

Settings

Select "Quick messages" to display the list

of messages.

Select the "Delayed", "My arrival", "Not

available" or "Other" tab, enabling you to

create new messages.

Audio settings

Configuring profiles

Press Settings to display the main page.

Press "Create" to write a new message.

Select "Audio settings".

Press the "OPTIONS" button to access the

secondary page.

Select the message chosen in one of the

lists.

Then select "Ambience", "Position", "Sound",

"Voice" or "Ringtone".

Select "Setting of the profiles".

Press "Transfer" to select one or more

recipients.

Press "OK" to save the settings.

Select "Profile 1", "Profile 2", "Profile 3” or

"Common profile".

Press "Play" to start playing the message.

Press this button to enter a name for the

profile using the virtual keypad.

Press "OK" to confirm.

The balance/distribution (or spatialisation

processing to adjust the sound quality

according to the number of passengers in the

vehicle.

Managing email

Press Telephone to display the main page.

Press this button to add a photograph to

the profile.

Available only with the front and rear speaker

configuration.

Press the "OPTIONS" button to access the

secondary page.

Insert a USB memory stick containing the

photograph in the USB port.

Select the photograph.

Select "Email" to display the list of

messages.

The Ambience setting (choice of 6

ambiances) as well as for Bass, Medium

and Treble are different and independent for

each audio source.

Press "OK" to accept the transfer of the

photograph.

Select the "Incoming", "Sent" or "Not

read” tab.

Press "OK" again to save the settings.

Select the message chosen in one of the lists.

Press "Play" to start playing the message.

Activate or deactivate "Loudness".

The "Position" settings (All passengers, Driver

and Front only) are common to all sources.

239

NAVIGATION

11

The location for the photograph is square;

the system reshapes the original

Press the "OPTIONS" button to access the

secondary page.

Press this button to set the date.

photograph if in another format.

Select "System settings".

Press "OK" to confirm.

Press this button to reset the selected

profile.

Select "Units" to change the units of distance,

fuel consumption and temperature.

Select "Factory settings" to restore the initial

settings.

Select the display format for the date.

Resetting the selected profile activates

the English language by default.

Time and date setting is only available if

"GPS synchronisation" is deactivated.

Resetting the system to "Factory

settings" activates English and degrees

Fahrenheit and deactivates summer time.

Select a "Profile" (1 or 2 or 3) to link "Audio

settings" with it.

Setting the time

Select "Audio settings".

Press Settings to display the main page.

Select "System info" to display the versions of the

Then select "Ambience", "Position"; "Sound",

"Voice" or "Ringtone".

various modules installed in the system.

Press the "OPTIONS" button to access the

secondary page.

Press "OK" to save the selected profile’s

settings.

Selecting the language

Select "Setting the time-date".

Press Settings to display the main page.

Select "Time".

Modifying system settings

Press the "OPTIONS" button to access the

secondary page.

Press this button to set the time using the

virtual keypad.

Press Settings to display the main page.

Select "Languages" to change the

language.

Press "OK" to confirm.

Press the "OPTIONS" button to access the

secondary page.

Press this button to set the time zone.

Select "Screen configuration".

Setting the date

Select the display format for the time

(12h/24h).

Press Settings to display the main page.

Select "Animation".

Activate or deactivate:Automatic scrolling

Activate or deactivate summer time (+1

hour).

Press the "OPTIONS" button to access the

secondary page.

Select "Brightness".

Activate or deactivate GPS

synchronisation (UTC).

Press "OK" to confirm.

Select "Setting the time-date".

Move the slider to adjust the brightness of

the screen and/or the instrument panel.

Press Settings to display the main page.

Select "Date".

240

NAVIGATION

11

The system may not automatically

The address is not recognised.

►ꢀ Use the "intuitive method" by pressing

the "Search…" button at the bottom of the

"Navigation” page.

The route settings do not take account of TMC

messages.

manage the change between winter and

summer time (depending on the country of

sale).

►ꢀ Configure the "Traffic info" function in the

route settings list (None, Manual or Automatic).

I am receiving a "Danger zone" alert which is not

on my route.

The route calculation is not successful.

The route settings may conflict with the current

location (for example, if toll roads are excluded

but the vehicle is on a toll road).

►ꢀ Check the route settings in the "Navigation"

menu.

Colour schemes

Depending on equipment/Depending on version.

As well as providing guided navigation, the

system announces all "Danger areas" positioned

in a cone located in front of the vehicle. It may

provide an alert for "Danger areas" located on

nearby or parallel roads.

As a safety measure, the procedure for

changing the colour scheme is only

I am not receiving "Danger zone" alerts.

You have not subscribed to the online services

option.

possible when the vehicle is stationary.

►ꢀ Zoom the map to show the exact location

of the "Danger area". You can select "On the

route" to stop receiving warnings or decrease the

warning duration.

Press Settings to display the main page.

Select "Color schemes".

►ꢀ If you have subscribed to the option:

- a few days may elapse before the service is

activated,

Certain traffic jams along the route are not

indicated in real time.

Select a colour scheme in the list then

- services may not be selected in the system

menu,

press "OK" to confirm.

On starting, a few minutes may elapse before the

system begins to receive traffic information.

►ꢀ Wait until traffic information is being received

correctly (traffic information icons shown on the

map).

- online services are not active ("TOMTOM

TRAFFIC" not shown on the map).

The POIs do not appear.

Whenever the colour scheme is changed,

the system restarts, temporarily

displaying a black screen.

The POIs have not been selected.

►ꢀ Set the zoom level to 200 metres (656 ft), or

select POIs from the POI list.

In certain countries, only major routes

(motorways, etc.) are listed for the traffic

information.

Frequently asked

questions

The following information groups together the

answers to the most frequently asked questions

concerning the system.

The "Danger zone" audible warning feature is not

working.

This is perfectly normal. The system is dependent

on the traffic information available.

The altitude is not displayed.

The audible warning is not active or the volume is

too low.

►ꢀ Activate the audible warning in the

"Navigation" menu and check the voice volume in

the sound settings.

On starting, GPS initialisation may take up to

3 minutes to receive more than 4 satellites

correctly.

Navigation

I cannot enter the navigation address.

The system does not suggest a detour around an

incident on the route.

241

NAVIGATION

11

►ꢀ Wait until the system has started up

completely so that there is GPS coverage by at

least 4 satellites.

This is a perfectly normal phenomenon, and is not

indicative of an audio system malfunction.

I cannot find some radio stations in the list of

stations received.

Some characters in information about the

currently playing media may not be displayed

correctly.

Depending on the geographical environment

(tunnel, etc.) or the weather, the conditions of

reception of the GPS signal may vary.

This behaviour is normal. The system is dependent

on the GPS signal reception conditions.

My navigation is no longer connected.

During start-up and in certain geographical areas,

the connection may be unavailable.

The audio system is unable to process certain

types of character.

The name of the radio station changes.

The station is no longer received or its name has

changed in the list.

►ꢀ Use standard characters to name tracks and

folders.

Some radio stations send other information in

place of their name (the title of the song for

example).

Playback of streaming files does not start.

The connected device does not automatically

launch playback.

The system interprets these details as the station

name.

►ꢀ Start playback from the device.

Track names and playing times are not displayed

on the audio streaming screen.

The Bluetooth profile does not allow the transfer

of this information.

►ꢀ Check that the online services are activated

(settings, contract).

►ꢀ Press "Update list" in the "Radio stations"

secondary menu.

Radio

Media

The reception quality of the radio station being

listened to gradually deteriorates or the station

presets are not working (e.g. no sound, "87.5" MHz

is displayed).

Telephone

Playback of my USB memory stick starts only

after a very long wait (around 2 to 3 minutes).

Some files supplied with the memory stick may

greatly slow down access to reading the memory

stick (multiplication by 10 of the cataloguing

time).

I am unable to connect my Bluetooth telephone.

The telephone's Bluetooth function may be

switched off or the device may not be visible.

►ꢀ Check that the telephone has Bluetooth

switched on.

The vehicle is too far from the selected station’s

transmitter, or no transmitter is present in the

geographical area.

►ꢀ Activate the "RDS" function by means of the

short-cut menu to enable the system to check

whether there is a more powerful transmitter in

the geographical area.

►ꢀ Delete the files supplied with the memory

stick and limit the number of sub-folders in the

file structure on the memory stick.

There may be an extended pause after inserting a

USB stick.

►ꢀ Check in the telephone settings that it is

"visible to all".

►ꢀ Deactivate then reactivate the telephone’s

Bluetooth function.

The aerial is missing or damaged (e.g. when going

through a car wash or in an underground car

park).

The Bluetooth telephone is not compatible with

the system.

The system reads a variety of data (folder, title,

artist, etc.). This can take from a few seconds to

a few minutes.

►ꢀ You can check the compatibility of the

telephone on the Brand's website (services).

Android Auto and/or CarPlay do not work.

Android Auto and CarPlay may not activate if the

USB cables are of poor quality.

►ꢀ Have the aerial checked by a dealer.

The surrounding area (e.g. hill, building, tunnel,

underground car park, etc.) is blocking reception,

including in RDS tracking mode.

This is perfectly normal.

242

NAVIGATION

11

►ꢀ Use genuine USB cables to ensure

compatibility.

Bluetooth mode does not allow SMS text

messages to be sent to the system.

►ꢀ In all cases, after applying sound settings,

adjust the volume level on the portable device (to

a high level) first. Then adjust the volume level on

the audio system.

Android Auto and/or CarPlay do not work.

Android Auto and CarPlay are not available in all

countries.

Settings

When the treble and bass settings are changed,

When the engine is off, the system switches off

after several minutes of use.

►ꢀ Check the list of supported countries via these

websites: Google Android Auto or Apple.

The volume of the telephone connected via

Bluetooth is too low.

the ambience is deselected.

When the engine is switched off, the system's

operating time depends on the state of charge of

the battery.

When the ambience is changed, the treble and

bass settings are reset.

Selecting an ambience imposes the treble and

bass settings, and vice versa.

The volume depends on both the system and the

telephone.

The switch-off is normal: the system

automatically goes into energy economy mode

and switches off to maintain an adequate charge

in the battery.

►ꢀ Modify the treble and bass or ambience

settings to obtain the desired musical ambience.

When the balance settings are changed, the

distribution is deselected.

►ꢀ Increase the volume of the audio system, to

maximum if required, and increase the volume of

the telephone if necessary.

►ꢀ Start the vehicle’s engine to increase the

charge of the battery.

Ambient noise affects the quality of the telephone

call.

When the distribution setting is changed, the

balance settings are deselected.

The date and time cannot be set.

►ꢀ Reduce ambient noise (e.g. close the windows,

reduce ventilation, slow down).

Date and time settings are only available if

satellite synchronisation is deactivated.

►ꢀ Settings menu/Options/Date-Time Setting.

Select the "Time" tab and deactivate "GPS

synchronisation" (UTC).

Selecting a distribution setting imposes the

balance settings, and vice versa.

Some contacts are duplicated in the list.

The options for synchronising contacts are:

synchronise the contacts on the SIM card, the

contacts on the telephone, or both. When both

synchronisations are selected, some contacts

may be duplicated.

►ꢀ Modify the balance setting or the distribution

setting to obtain the desired sound quality.

There is a difference in sound quality between

audio sources.

To allow for optimal listening quality, the sound

settings can be tailored to different audio

sources, which can generate audible differences

when changing source.

►ꢀ Select "Display SIM card contacts" or "Display

telephone contacts".

The contacts are not listed in alphabetical order.

Some telephones offer display options. Depending

on the settings chosen, contacts can be

transferred in a specific order.

►ꢀ Check that the sound settings are appropriate

to the sources listened to. We recommend setting

the sound functions (Bass, Treble, Balance) to the

middle position, setting the musical ambience to

"None", setting loudness correction to "Active" in

USB mode and "Inactive" in Radio mode.

►ꢀ Modify the telephone directory display

settings.

The system is not receiving SMS text messages.

NAVIGATION for Your DS 7 4 Door First Generation (2017-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals