2020-2024 DS 9 4 Door Access -> Alarm User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Access -> Alarm for Your DS 9 4 Door First Generation (2020-2024)

35  
Access  
02  
been detected, wait at least 2 seconds before  
repeating the movement.  
– washing the vehicle;  
The alarm is triggered if anyone breaks a window,  
– maintenance is performed on the vehicle;  
– accessing the spare wheel.  
enters the passenger compartment or moves  
inside the vehicle.  
Do not give repetitive kicks.  
To avoid such operating problems, keep the  
electronic key away from the recognition zone or  
deactivate the hands-free function.  
Anti-tilt monitoring  
If the boot has not started to move, check that:  
– the function is activated.  
The system checks for any change in the attitude  
of the vehicle.  
– the electronic key is on your person, outside the  
vehicle in the rear recognition area.  
– the "kicking" movement was performed in the  
detection zone, close enough to the bumper.  
– the foot was removed from the bumper quickly  
enough.  
Towing device  
The alarm goes off if the vehicle is lifted or moved.  
The installation of a towing device may  
disturb the detection system.  
When the vehicle is parked, the alarm will  
not be triggered if the vehicle is knocked.  
Self-protection function  
Alarm  
(Depending on version)  
The system checks whether any of its  
components are out of service.  
Recommendations on the  
hands-free function (Hands-  
Free Tailgate Access)  
If it does not work, check that the electronic key  
is not exposed to a source of electromagnetic  
interference (e.g. smartphone).  
The function may be deactivated or affected if  
there is rain or snow.  
The alarm is triggered if the battery, the central  
control or the siren wiring is put out of service or  
damaged.  
Work on the alarm system  
Contact a dealer or a qualified workshop.  
Locking the vehicle with full  
alarm system  
The function may not work correctly with a  
prosthetic leg.  
System which protects and provides a deterrent  
against theft and break-ins.  
In some circumstances, the boot may open or  
close by itself, particularly when:  
– hitching up or removing a trailer;  
– fitting or removing a bicycle carrier;  
– loading or unloading bicycles on/from a bicycle  
carrier;  
Activation  
Exterior perimeter monitoring  
►ꢀ Switch off the ignition and exit the vehicle.  
►ꢀ Lock or deadlock the vehicle using the remote  
control or by pressing on one of the front door  
handles.  
The system checks for opening of the vehicle.  
The alarm is triggered if anyone tries to open a  
door, the boot or the bonnet, for example.  
– depositing or lifting something behind the  
vehicle;  
Interior volumetric monitoring  
When the monitoring system is active, the red  
indicator lamp in the button flashes once per  
The system checks for any variation in volume in  
the passenger compartment.  
– an animal approaches the rear bumper;  
36  
Access  
02  
second and the direction indicators come on for  
about 2 seconds.  
opened within 30 seconds of unlocking), the  
monitoring system is automatically activated.  
Reactivating the interior volumetric and  
anti-tilt monitoring  
The exterior perimeter monitoring is activated  
after 5 seconds and the interior volumetric and  
anti-tilt monitoring after 45 seconds.  
►ꢀ Deactivate the exterior perimeter monitoring  
by unlocking the vehicle using the remote control  
or by pressing on a door handle.  
Locking the vehicle with  
exterior perimeter monitoring  
only  
Deactivate the interior volumetric and anti-tilt  
monitoring to avoid the unwanted triggering of  
the alarm, in certain cases such as:  
– Slightly open window.  
The indicator lamp in the button goes off.  
►ꢀ Reactivate all monitoring by locking the  
vehicle using the remote control or by pressing on  
a door handle.  
The alarm does not activate when locking  
automatically from a distance.  
If an opening (door, boot or bonnet) is not  
properly closed, the vehicle is not locked,  
but the exterior perimeter monitoring will be  
activated after 45 seconds, at the same time  
as the interior volumetric and anti-tilt  
monitoring.  
The red indicator lamp in the button once again  
flashes every second.  
– Washing the vehicle.  
Triggering of the alarm  
This is indicated by sounding of the siren and  
flashing of the direction indicators for 30  
seconds.  
– Changing a wheel.  
– Towing the vehicle.  
– Transport on a ship or ferry.  
Deactivation  
Deactivating the interior volumetric and  
anti-tilt monitoring  
Depending on the country of sale, certain  
monitoring functions remain active until  
the alarm has been triggered eleven times  
consecutively.  
►ꢀ Press one of the remote control unlocking  
buttons:  
►ꢀ Switch off the ignition and within 10 seconds  
press the alarm button until its red indicator lamp  
is on fixed.  
Short press.  
When the vehicle is unlocked using the remote  
control or the Keyless Entry and Start system,  
rapid flashing of the red indicator lamp in the  
button informs you that the alarm was triggered  
during your absence. When the ignition is  
switched on, this flashing stops.  
Long press.  
►ꢀ Get out of the vehicle.  
►ꢀ Immediately lock the vehicle using the remote  
control or by pressing one of the front door  
handles.  
or  
►ꢀ Unlock the vehicle using the remote control or  
by pressing one of the front door handles.  
The monitoring system is deactivated: the  
indicator lamp in the button goes off and the  
direction indicators flash for about 2 seconds.  
Only the exterior perimeter monitoring is  
activated; the button's red indicator lamp flashes  
once every second.  
Failure of the remote control  
To deactivate the monitoring functions:  
►ꢀ Unlock the vehicle using the key in the driver's  
door lock.  
To take effect, this deactivation must be  
carried out after each time the ignition is  
switched off.  
After unlocking using the remote control  
If the vehicle automatically locks itself  
►ꢀ Open the door; the alarm is triggered.  
again (as happens if a door or the boot is not  
37  
Access  
02  
►ꢀ Switch on the ignition; this stops the alarm.  
The indicator lamp in the button goes off.  
opens/closes completely when the switch is  
released.  
Electric windows  
Operating the switch again stops the movement  
of the window.  
Locking the vehicle without  
activating the alarm  
►ꢀ Lock or deadlock the vehicle using the key  
(built-in the remote control) in the driver's door  
lock.  
Window controls remain operational for  
approximately 45 seconds after switching  
off the ignition or after locking the vehicle.  
After that time, the controls are disabled.  
To reactivate them, switch on the ignition or  
unlock the vehicle.  
Automatic activation  
(Depending on version)  
1. Left-hand front  
Anti-pinch  
2. Right-hand front  
The system is activated automatically 2 minutes  
after the last door or the boot is closed.  
►ꢀ To avoid triggering the alarm on entering the  
vehicle, first press the unlocking button on the  
remote control or unlock the vehicle using the  
"Keyless Entry and Start" system.  
3. Left-hand rear  
If the window meets an obstacle while rising, it  
stops and immediately partially lowers again.  
4. Right-hand rear  
5. Deactivation of electric window controls  
located by rear seats  
Deactivation of the rear  
controls for the rear electric  
windows  
Deactivation of the rear door opening controls  
(electric child lock)*  
Malfunction  
For children's safety, press switch 5 to  
deactivate the rear electric windows  
controls.  
When the ignition is switched on, the fixed  
lighting of the red indicator lamp in the button  
indicates a system malfunction.  
Have it checked by a dealer or a qualified  
workshop.  
Manual operation  
►ꢀ To open/close the window, press/pull the  
switch without passing the point of resistance;  
the window stops as soon as the switch is  
released.  
The indicator lamp for the button comes on,  
accompanied by a message confirming activation.  
With the ignition on, it remains lit, as long as the  
child lock remains activated.  
Automatic operation  
►ꢀ To open/close the window, press/pull the  
Use of the rear electric windows from the driver's  
controls remains possible.  
switch past its resistance point: the window  
* Depending on version.  

Related Topics

Popular Owner Manuals