33
Access
02
Bicycle carrier / Towing device
Following the interruption of a movement,
B. Using the exterior boot control.
C. Using the interior boot control.
D. Using the control on the dashboard*.
pressing one of these controls again reverses
the movement.
The motorised boot is not designed to support a
bicycle carrier.
When installing a bicycle carrier on the towing
device with connection of the cable to the towing
socket, the motorised operation of the boot will
be automatically deactivated.
Manual operation
Opening/Closing
The boot can be manoeuvred by hand, even with
motorised operation activated.
There must be no motorised manoeuvre in
progress.
►ꢀ Press and hold the central button A of the
electronic key.
If using a towing device or bicycle carrier not
approved by the Manufacturer, it is essential to
deactivate the motorised operation of the boot.
or
►ꢀ Briefly press the exterior boot control B, with
the electronic key on your person.
During manual opening and closing of the
motorised boot, boot struts are not used.
Resistance to opening and closing is therefore
quite normal.
or
Motorised operation
Motorised operation of the boot is set via
the Driving/Vehicle touch screen menu.
This function is activated by default.
►ꢀ Briefly press the interior boot control C
(locking only).
or
Repeatedly opening and closing the
motorised boot can cause overheating of
its electric motor, after which opening and
closing will not be possible.
►ꢀ Press twice in succession on control D on the
dashboard (opening only).
If motorised operation is not activated,
these actions release the boot (partially-
open position).
Allow at least 10 minutes for the electric motor
to cool down before operating the boot again.
If you are unable to wait, operate it manually.
When the vehicle is locked, the request to open
the boot with one of the controls A or B unlocks
the vehicle, or only the boot if selective
unlocking is activated, prior to the opening of
the boot.
Manual closing of the
motorised boot in case of
failure
It is possible to interrupt the operation of
the boot at any point.
This operation is only necessary in the case of
There are several ways of operating the boot:
A. Using the Keyless Entry and Start system
electronic key.
failure of the boot motor.
Pressing one of these controls again interrupts
the movement that is underway.
* Depending on version.