40
03
Ease of use and comfort
Removing a head restraint
►ꢀ Pull the head restraint fully up.
Correct driving position
Front head restraints
For safety reasons, adjustments must
only be made when the vehicle is
stationary.
►ꢀ Depending on equipment, press lug A or C to
release the head restraint and raise it fully.
►ꢀ Stow the head restraint securely.
Before taking to the road and to make the most
of the ergonomic layout of the instruments and
controls, carry out these adjustments in the
following order:
Refitting a head restraint
►ꢀ Insert the head restraint rods into the guides
in the corresponding seat backrest.
►ꢀ Push the head restraint fully down.
– head restraint height.
►ꢀ If the vehicle is so equipped, press lug Aor C to
release the head restraint and push it down.
►ꢀ Adjust the height of the head restraint.
– seat backrest angle.
Adjusting the height
Upwards:
– seat cushion height.
– longitudinal seat position.
– steering wheel height and reach.
– rear view mirror and door mirrors.
►ꢀ Pull the head restraint up to the desired
position; you can feel the head restraint clicking
into position.
Never drive with the head restraints
removed; they should be in place and
adjusted for the occupant of the seat.
Downwards:
►ꢀ Press lug A to lower the head restraint.
Front seats
The head restraint is correctly adjusted
when its upper edge is level with the top
of the occupant's head.
Adjustments
Before moving the seat backwards,
ensure that there is no person or object
that might prevent the full travel of the seat.
There is a risk of trapping or pinching
passengers if present in the rear seats or of
jamming the seat if large objects are placed on
the floor behind the seat.
Adjusting the angle
(Depending on equipment)
Forwards:
Once these adjustments have been made,
check that the instrument panel can be
viewed correctly from your driving position.
►ꢀ move the lower part of the head restraint
forwards.
Rearwards:
►ꢀ press and hold button B and push the lower
part of the head restraint rearwards.
English 
