54
03
Ease of use and comfort
►ꢀ With the engine running, press this button to
activate/deactivate the function (confirmed by an
indicator lamp).
when it is not connected) and is maintained for 10
minutes after.
Heated windscreen
The function is activated when the outside
temperature drops below 0°C. It is deactivated
automatically when the engine is switched off.
Temperature
pre-conditioning
(Rechargeable hybrid)
This function allows you to programme the
temperature in the passenger compartment to
reach a pre-defined, non-modifiable temperature
(approx. 21°C) before you enter the vehicle, on the
days and at the times of your choice.
This indicator lamp comes on fixed when
a temperature pre-conditioning cycle is
programmed. It flashes when temperature pre-
conditioning is in progress.
In cold weather, this system heats the bottom of
the windscreen, as well as the area alongside the
left-hand windscreen pillar.
You can set multiple programmes.
Each one is saved in the system.
To optimise the driving range, we recommend
starting a programme while the vehicle is
connected.
Without changing the settings for the air
conditioning system, it allows faster release
of the windscreen wiper blades when they
are frozen to the windscreen and helps avoid
the accumulation of snow resulting from the
operation of the windscreen wipers.
This function is available when the vehicle is
connected or not connected.
Programming
(With NAVIGATION)
Programming can also be carried out from
a smartphone using the MyDS App
application.
In the Climate > OPTIONS menu:
Select Temperature conditioning.
Switching on/off
With DS CONNECT RADIO, programming can
only be carried out from a smartphone using the
application.
►ꢀ Press + to add a programme.
►ꢀ Select the time of entry into the vehicle and
the desired days. Press OK.
For more information on Remote functions, refer
to the corresponding section.
►ꢀ Press ON to activate this programming.
The pre-conditioning sequence begins
approximately 45 minutes before the programmed
time when the vehicle is connected (20 minutes
The fan noise that occurs during
temperature pre-conditioning is perfectly
normal.
English 
