43
03
Ease of use and comfort
Heated and ventilated seats with NAVIGATION
Prolonged use of heated seats is not
recommended for people with sensitive
If the settings suit you and you make no changes,
the display returns to its original state.
The multipoint massages are also
managed by the DS SENSORIAL DRIVE
function.
The control buttons are displayed permanently in
the side banners of the touch screen.
►ꢀ Press one of these buttons to
display the heating and ventilation
settings page for the front seats.
In the settings page:
skin.
There is a risk of burns for people whose
perception of heat is impaired (e.g. illness,
taking medication).
For more information on the DS SENSORIAL DRIVE
function, refer to the corresponding section.
To modify the settings:
To keep the heated pad intact and to prevent a
short circuit:
►ꢀ Press this button to activate the
heating function of the corresponding
seat.
– Do not place heavy or sharp objects on the
seat.
►ꢀ Select another type of massage from the five
offered.
– Do not kneel or stand on the seat.
– Do not spill liquids onto the seat.
– Never use the heating function if the seat
is damp.
►ꢀ Select a massage intensity from the three
preset levels: "1" (Low), "2" (Normal) or "3"
(High).
►ꢀ Press this button to activate the
ventilation function of the corresponding
seat.
The changes are applied immediately.
Once activated, the system starts a one hour
massage cycle, made up of sequences of 6
minutes of massage followed by 3 minutes at
rest.
►ꢀ Each press of a button changes the level of
heating or ventilation; the corresponding number
of indicator lamps come on (low/medium/high).
►ꢀ To deactivate, press the button again until all
the indicator lamps are off.
Multipoint massage
System with a choice of type of massage and
adjustment of its intensity.
The system automatically stops at the end of the
cycle; the button's indicator lamp goes off.
The status of the function is saved when the
ignition is switched off.
This system operates with the engine running, as
well as in STOP mode of Stop & Start.
The massage settings are adjusted via the touch
screen.
Do not use the function when the seat is
not occupied.
The system is switched on, either directly using
the button on the front seat, or by activating a
personalised ambience with the DS SENSORIAL
DRIVE function.
Reduce the heating intensity as soon as
possible.
When the seat and passenger compartment
have reached a satisfactory temperature,
switch the function off; reducing electrical
consumption in turn decreases energy
consumption.
Using the button on the front seat:
►ꢀ Press this button; its indicator lamp
comes on.
The system is immediately activated with the last
settings used and the settings page is displayed
on the touch screen.
English 
