167
08
In the event of a breakdown
Driving with more than one "space-saver" type
spare wheel is prohibited.
Changing a bulb must only be done with
the ignition off and after the headlamp /
lamp has been switched off for several
minutes - risk of serious burns!
If you need to replace this type of bulb,
you must contact a dealer or a qualified
workshop.
Do not touch the LED technology bulbs - risk of
electrocution!
Visit a dealer or a qualified workshop.
Have the tightening of the spare wheel's
bolts and its tyre pressure checked.
Have the punctured tyre examined. After
inspection, the technician will advise you on
whether the tyre can be repaired or if it must
be replaced.
Do not touch the bulb directly with your
fingers; use a lint-free cloth.
It is essential only to use anti-ultraviolet (UV)
type bulbs, so as not to damage the headlamp.
Always replace a failed bulb with a new bulb
of the same type and specification. To avoid
lighting imbalance, replace the bulbs in pairs.
Never look too closely at the light beam of
LED technology lamps - risk of serious eye
injury!
After changing a bulb
Changing a bulb
To refit, carry out the operations in
reverse order to removal.
In some weather conditions (e.g. low
temperature or humidity), misting on the
internal surface of the glass of the headlamps
and rear lamps is normal, and will disappear
after the lamps have been on for a few
minutes.
Close the protective cover very carefully to
guarantee the sealing of the lamps.
Light-emitting diode (LED)
headlamps and lamps
Depending on version, the affected types of
The headlamps have polycarbonate
lenses with a protective coating:
headlamps/lamps are:
– DS ACTIVE LED VISION headlamps.
– Offset daytime running lamps.
– Direction indicator side repeaters.
– Side spotlamps.
–
Do not clean them with a dry or abrasive
cloth, nor with detergent or solvent products.
– Use a sponge and soapy water or a pH
neutral product.
– Full LED technology rear lamps.
– Third brake lamp.
– When using a high-pressure washer on
persistent marks, do not keep the lance
directed towards the headlamps, lamps or
their edges for too long, so as not to damage
their protective coating and seals.
– Rear screen sidelamps (DS Cornet).
– Number plate lamps.
English 
