TRIP COMPUTER
• The “Trip computer” is used to display information on car operation when the
key is turned to MAR. This function comprises two separate trips, namely “Trip
A” and “Trip B”.
• Both functions can be reset (start of a new journey).
• “Trip A” allows the following values to be displayed: range, distance
travelled, average consumption, instantaneous consumption, average speed,
journey time (driving time).
• “Trip B” allows the following values to be displayed: range, distance
travelled B, average consumption B, average speed B, journey time B (driving
time).
SET TIME (SETTING THE CLOCK)
• The time is set through the multifunction display.
• When the MENU ESC button is pressed, two submenus will be shown on the
display: “Time” and “Format”.
• Press the + or – button to move between the two submenus.
• Select the required option and press the MENU ESC button.
• Having entered the “Time” submenu: when the MENU ESC button is pressed
briefly, the “hours” will flash on the display.
• Press the button + or – to carry out the adjustment.
• Having set the time, briefly press the MENU ESC button: the “minutes” will
flash on the display. Set the minutes using the same procedure as for the
hours.
• Having set the time, press and hold down the MENU ESC button.
DEACTIVATING FRONT PASSENGER AIRBAG AND SIDE BAG
(for versions/markets, where provided)
• This function is used to activate/deactivate the passenger side airbag.
• Proceed as follows:
• press the MENU ESC button and, after the message Bag pass: Off (to
deactivate) or Bag pass: On (to activate) is displayed by pressing buttons +
or –, press the MENU ESC button again;
• a confirmation request message will appear on the display;
• by pressing the + or – buttons select (Yes) (to confirm the activation/
deactivation) or (No) (to cancel);
• press the MENU ESC button briefly; a selection confirmation message will be
displayed after which the program returns to the menu screen. Alternatively,
hold down the button to return to the standard screen without storing.
HEADLIGHT ALIGNMENT
• With the ignition key in MAR position and dipped headlights on, press the +
button to adjust the headlights upwards and the – button to adjust the
headlights downwards.
10
English 
