Get GETTING TO KNOW YOUR CAR -> EXTERIOR LIGHTS Guide for Fiat 500 X 4 Door First Generation (2014-2024)

Mirror realignment adjustment

AUTO FUNCTION

(Dusk sensor)

(where provided)

EXTERIOR LIGHTS

If one of the door mirrors has been

moved manually, it may not maintain its

position while driving.

LIGHT SWITCH

This is an infrared LED sensor that

works in conjunction with the rain

sensor and is located on the

The ring nut of light switch A fig. 27,

located on the left side of the

In this case the following realignment

procedure must be carried out:

windscreen. It is able to detect

variations in outside lighting based on

the light sensitivity set in the display

Menu or the Uconnect™ system.

The higher the sensitivity, the lower the

amount of external light needed to

automatically switch the external lights

on.

dashboard, controls operation of: side

lights, daytime running lights, dipped

beam headlights, fog lights and

❒ manually close the mirror into parking

position, moving it from position 1 to

position 2 (see fig. 26);

instrument panel indicator and control

button graphic lighting regulation.

❒ Operate the door opening control C

fig. 25 once or twice to realign the

system and bring both mirrors

into driving position.

Function activation

WARNING

Turn the light switch ring nut to AUTO.

17) As the driver's door mirror is curved, it

may slightly alter the perception of

distance.

IMPORTANT The function can only

be activated with the ignition device at

MAR.

F1B0036C

Function deactivation

With the ignition device turned to MAR,

the instrument panel and the various

controls on the dashboard will be lit up

when the exterior lights are switched

on.

To deactivate the function, turn the light

switch ring nut to a position other

than AUTO.

DIPPED BEAM

HEADLIGHTS

Turn the light switch ring nut to

side lights, dipped beam headlights and

instrument panel will light up; the

warning light will come on on the

latter.

DAYTIME RUNNING

LIGHTS (DRL)

"Daytime Running Lights"

PARKING LIGHTS

"Follow me home" function

interaction with system

Uconnect^TMsystem

These lights can be switched on with

ignition device at STOP or with key

removed, by moving the light switch

ring nut to position O and then to

18) 19)

If on the menu Uconnect™ the timer is

set to 0 seconds it is possible, using

the high beam lever, to turn on the

lights for a pre-set time of 30 seconds.

It is possible to activate the lights 7

times up to a maximum of 210

seconds.

With the ignition device turned to MAR

and the light switch ring nut turned to

position O the daytime running lights

are automatically activated (the other

lights and interior lighting remain off).

position

to position O.

, the switch will go back

The warning light switches on in

the instrument panel.

FOG LIGHTS

(where provided)

HEADLIGHTS OFF TIMER

(Follow me home)

If, however, always acting on the

"Settings" menu of Uconnect™, a

timing is set (e.g. 30 or 60 seconds),

every time the engine is switched

off the "Follow me home" function will

be active for that time (it will not be

possible to change it by acting on the

light switch).

Activation

Press the

button to turn on the fog

lights with side lights and dipped beam

headlights on.

With headlights on, bring the ignition

device to STOP.

When the fog lights are on, the side

lights and number plate lights are also

on, while the daytime running lights

are off.

Within 45 seconds, turn the light switch

on the O: the timing, previously set via

Menu (0, 30, 60 to 90 seconds) starts.

MAIN BEAM HEADLIGHTS

Deactivation

Press the button again or turn the

switch ring nut to O in order to switch it

off.

With the light switch ring nut turned to

position

This function is deactivated by

switching on the headlights, the side

lights or bringing the ignition device to

MAR.

or AUTO push the left stalk

A fig. 28 forwards, towards the

dashboard.

REAR FOG LIGHT

(where provided)

With main beam headlights on, the

warning light on the instrument

panel will come on at the same time.

The button that controls switching on

and off of the rear fog light is integrated

into the light switch.

Flashing

Press the

button to turn on the rear

fog light with side lights and fog lights

on.

Pull stalk A toward yourself fig. 28, to

the unstable position; the stalk goes

back to the central stable position when

it is released.

With main beam headlights on, the

warning light on the instrument

panel will come on at the same time.

The function is activated by pushing the

stalk toward the dashboard (stable

If the stalk is moved from the stable

central position and pushed again

towards the dashboard in the stable

position, this is interpreted as a request

for fixed main beam headlights: the

warning light comes on in the

position); the

warning light comes

on in the instrument panel. The

warning light will also come on in

the instrument panel with main beam

headlights on. If the vehicle is turned off

with the setting described previously,

the automatic main beam headlight

function will need a new resetting: bring

back the stalk in the centre position

and then press it again towards the

instrument panel.

instrument panel and the main beam

headlights turn on until vehicle speed

exceeds 40 km/h again. When this

threshold is exceeded the function

activates again automatically and the

warning light comes on again

in the instrument panel.

To deactivate this function, rotate the

F1B0037C

When the speed is higher than 40 km/h

and the function is active, if the stalk

is brought again to the stable central

position the function deactivates and

the main beam headlights turn off.

When the speed is lower than 15 km/h

and the function is active, the system

automatically switches the main beam

headlights off.

light switch ring nut to the

position.

Automatic main beam headlights

(where provided)

DIRECTION INDICATORS

In order not to disturb other road users,

the main beam headlights are

Bring left stalk A fig. 28 to the (stable)

position:

automatically deactivated when

approaching vehicles travelling in the

opposite direction or when following a

vehicle travelling in the same direction.

This function can be set through the

display menu (see the instructions

in the "Display" paragraph, "Knowing

the instrument panel" chapter); the light

switch ring nut must be turned to

AUTO to activate.

upwards: activates the right direction

indicator;

downwards: activates the left direction

indicator.

The or warning light respectively

will flash on the instrument panel.

The direction indicators switch

off automatically when the steering

wheel is straightened or when the

daytime running lights (DRL)/parking

lights are activated.

"Lane Change" function

❒ Position 3: driver + maximum

admissible load stowed only in the

luggage compartment.

INTERIOR LIGHTS

If you wish to signal a lane change while

running, place the left stalk in the

unstable position for less than half a

second.

FRONT ROOF LIGHT

IMPORTANT Check the headlight

alignment each time the weight of the

load transported changes.

Switch A fig. 30 is used to switch on/off

the roof light bulbs.

Switch A positions:

The direction indicator on the side

selected will flash five times and then

switch off automatically.

❒ central position: lights B and E switch

on/off when the doors are opened/

closed;

INSTRUMENT PANEL AND

CONTROL BUTTON

GRAPHICS BRIGHTNESS

ADJUSTMENT

HEADLIGHT ALIGNMENT

ADJUSTMENT

❒ pressed to the left (OFF): lights B and

E are always switched off;

Headlight alignment corrector

With side lights or headlights on, turn

ring nut B fig. 29 upwards to increase

light brightness of the instrument panel

and of the control button graphics, or

turn the ring nut downwards to

decrease it.

The headlight alignment corrector

operates with ignition device at MAR

and dipped headlights on.

❒ pressed to the right (

): lights B

and E are always switched on.

To adjust rotate ring nut A fig. 29.

WARNING

18) The daytime running lights are an

alternative to the dipped beam headlights

for driving in countries where it is

compulsory to have lights on during the

day; where it is not compulsory, the use of

daytime running lights is permitted.

F1B0041C

F1B0038C

The lights switch on/off gradually.

Switch C switches light B on/off.

Switch D switches light E on/off.

19) Daytime running lights cannot replace

dipped beam headlights when driving at

night or through tunnels. The use of

daytime running lights is governed by the

highway code of the country in which

you are driving. Comply with legal

requirements.

❒ Position 0: one or two people on the

front seats;

❒ Position 1: 4 or 5 people

❒ Position 2: 4 or 5 people + load in

the luggage compartment

GETTING TO KNOW YOUR CAR -> EXTERIOR LIGHTS for Your Fiat 500 X 4 Door First Generation (2014-2024)

Related Topics

GETTING TO KNOW YOUR CAR

Popular Owner Manuals

Latest Owner Manuals