"Lane Change" function
❒ Position 3: driver + maximum
admissible load stowed only in the
luggage compartment.
INTERIOR LIGHTS
If you wish to signal a lane change while
running, place the left stalk in the
unstable position for less than half a
second.
FRONT ROOF LIGHT
IMPORTANT Check the headlight
alignment each time the weight of the
load transported changes.
Switch A fig. 30 is used to switch on/off
the roof light bulbs.
Switch A positions:
The direction indicator on the side
selected will flash five times and then
switch off automatically.
❒ central position: lights B and E switch
on/off when the doors are opened/
closed;
INSTRUMENT PANEL AND
CONTROL BUTTON
GRAPHICS BRIGHTNESS
ADJUSTMENT
HEADLIGHT ALIGNMENT
ADJUSTMENT
❒ pressed to the left (OFF): lights B and
E are always switched off;
Headlight alignment corrector
With side lights or headlights on, turn
ring nut B fig. 29 upwards to increase
light brightness of the instrument panel
and of the control button graphics, or
turn the ring nut downwards to
decrease it.
The headlight alignment corrector
operates with ignition device at MAR
and dipped headlights on.
❒ pressed to the right (
): lights B
and E are always switched on.
To adjust rotate ring nut A fig. 29.
WARNING
18) The daytime running lights are an
alternative to the dipped beam headlights
for driving in countries where it is
compulsory to have lights on during the
day; where it is not compulsory, the use of
daytime running lights is permitted.
F1B0041C
30
F1B0038C
The lights switch on/off gradually.
Switch C switches light B on/off.
Switch D switches light E on/off.
29
19) Daytime running lights cannot replace
dipped beam headlights when driving at
night or through tunnels. The use of
daytime running lights is governed by the
highway code of the country in which
you are driving. Comply with legal
requirements.
❒ Position 0: one or two people on the
front seats;
❒ Position 1: 4 or 5 people
❒ Position 2: 4 or 5 people + load in
the luggage compartment
24
English 