Mirror realignment adjustment
AUTO FUNCTION
(Dusk sensor)
(where provided)
EXTERIOR LIGHTS
If one of the door mirrors has been
moved manually, it may not maintain its
position while driving.
LIGHT SWITCH
This is an infrared LED sensor that
works in conjunction with the rain
sensor and is located on the
The ring nut of light switch A fig. 27,
located on the left side of the
In this case the following realignment
procedure must be carried out:
windscreen. It is able to detect
variations in outside lighting based on
the light sensitivity set in the display
Menu or the Uconnect™ system.
The higher the sensitivity, the lower the
amount of external light needed to
automatically switch the external lights
on.
dashboard, controls operation of: side
lights, daytime running lights, dipped
beam headlights, fog lights and
❒ manually close the mirror into parking
position, moving it from position 1 to
position 2 (see fig. 26);
instrument panel indicator and control
button graphic lighting regulation.
❒ Operate the door opening control C
fig. 25 once or twice to realign the
system and bring both mirrors
into driving position.
Function activation
WARNING
Turn the light switch ring nut to AUTO.
17) As the driver's door mirror is curved, it
may slightly alter the perception of
distance.
IMPORTANT The function can only
be activated with the ignition device at
MAR.
F1B0036C
27
Function deactivation
With the ignition device turned to MAR,
the instrument panel and the various
controls on the dashboard will be lit up
when the exterior lights are switched
on.
To deactivate the function, turn the light
switch ring nut to a position other
than AUTO.
DIPPED BEAM
HEADLIGHTS
Turn the light switch ring nut to
:
side lights, dipped beam headlights and
instrument panel will light up; the
warning light will come on on the
latter.
21
English 