Opening the flap
Emergency refuelling
REFUELLING THE
VEHICLE
To refuel proceed as follows:
Proceed as follows:
❒ unlock flap A fig. 105 by pressing on
the specified point and then open it;
❒ open the boot and take adaptor C
fig. 106, located in the tool box or in the
Fix&Go kit container (according to the
versions);
125) 126) 127)
❒ introduce the dispenser in the filler
and refuel;
PETROL ENGINES
Only use unleaded petrol with a number
of octanes (R.O.N.) not lower than 95
(EN 228 specification).
❒ open flap A fig. 105, as described
previously;
❒ introduce the adaptor in the filler as
shown and refuel;
DIESEL ENGINES
51)
Only use Diesel for motor vehicles (EN
590 specification).
When using or parking the vehicle for a
long time in the mountains or cold
areas, it is advisable to refuel using
locally available diesel. In this case, it is
also advisable to keep the tank over
50% full.
F1B0164C
105
❒ at the end of refuelling, before
removing the dispenser, wait for at least
10 seconds in order for the fuel to
flow inside the tank;
REFUELLING
PROCEDURE
F1B0165C
106
❒ then remove the dispenser from the
filler and close flap A.
❒ after refuelling, remove the adaptor
and close the flap;
"Capless Fuel" is a device at the
opening for the fuel tank which opens
and recloses automatically when the
fuel supply gun is introduced/removed.
The "Capless Fuel" device is provided
with an inhibitor which prevents
refuelling with incorrect fuel.
The flap is provided with a dust cover
gaiter B which prevents deposits of
impurities and dust at the end of the
filler when the flap is closed.
❒ finally refit the adaptor in the boot.
WARNING
125) Do not apply any object/plug to the
end of the filler which is not provided
for the vehicle. Using non-approved
objects/plugs may cause pressure
increase in the tank, leading to dangerous
conditions.
129
English 