The
warning light on the instrument
SYSTEM MANUAL
ACTIVATION/
DEACTIVATION
System deactivation
panel switches on to signal that the
engine was stopped.
A message will appear on the display
when the system is deactivated. In this
condition, the LED on the fig. 96 button
is on.
To activate/deactivate the system
manually, press the fig. 96 button
located on the dashboard in central
position.
Engine restarting mode
Versions with manual gearbox
SAFETY FUNCTIONS
To restart the engine, press the clutch
pedal.
On 4x4 versions, each time the
"Traction" mode is set through the
MOOD selector, the system is disabled;
the Start&Stop system can be
reactivated by pressing the fig. 96
button. When exiting from the "Traction"
mode, the Start&Stop system enters
the previously set status.
When the engine is stopped through
the Start&Stop system, if the driver
releases their seat belt or opens the
driver's or passenger's door, the engine
can be restarted only by using the
ignition device.
If the vehicle does not start when the
clutch is pressed, place the gear lever
in neutral and repeat the procedure.
If the problem persists, contact a Fiat
Dealership.
This condition is indicated to the driver
both through a buzzer and a message
on the display.
Versions with automatic transmission
To restart the engine, release the brake
pedal.
With brake pressed, if the gear lever is
in automatic mode - D (Drive) - the
engine can be restarted by moving the
lever to R (Reverse) or N (Neutral) or
"AutoStick".
WARNING
117) If the battery needs to be replaced,
always contact a Fiat Dealership. Replace
the battery using a new one of the same
type (HEAVY DUTY) and having the same
specifications.
With brake pressed, if the gear lever is
in "AutoStick" mode, the engine can be
restarted by moving the lever to "+" or
"–", or R (Reverse) or N (Neutral).
When the engine has been stopped
automatically, keeping the brake pedal
pressed, the brake can be released
keeping the engine off by quickly
shifting the gear lever to P (Park).
To restart the engine, just move the
lever out of position P.
F1B0138C
96
WARNING
System activation
Activation of the system is indicated by
the
41) If the climate comfort is to be favoured,
the Start&Stop system can be deactivated,
for a continuous operation of the climate
control system.
warning light switching on and,
on some versions, by a message on the
display. In this condition, the LED on
the fig. 96 button is off.
116
English 