Knowing Your Car -> Seats for Your Fiat 600 SUV Second Generation (2023-2026)

CHILD LOCKS  
SEATS  
31) Make sure to take the key with you  
once a door or the tailgate is locked, to  
prevent locking the same key inside the  
car. If the key is locked inside, it can only  
be retrieved by using the second key  
provided.  
33) 34)  
FRONT SEATS  
Mechanical child locks  
35) 36) 37) 38)  
7)  
32) The operation of the recognition  
system depends on various factors, such  
as, for example, any electromagnetic wave  
interference from external sources (e.g.  
mobile phones), the charge of the battery  
in the electronic key and the presence of  
metal objects near the key or the car. In  
these cases it is still possible to unlock  
the doors by using the metal insert in the  
electronic key.  
31  
JJ000435  
33) Use the child locks whenever children  
are occupying the rear seats.  
Turn the red child lock in the rear door  
inwards to the horizontal position by  
using a key fig. 31. The door cannot be  
opened from the inside.  
34) Before engaging the system please  
therefore check that there is no-one left  
on board. If the remote control battery is  
flat, the system can be disengaged only  
by inserting the key metal insert in either of  
the door locks as described previously: in  
this case the device remains active only for  
the rear doors.  
32  
JJ000025  
Sit with buttocks as far back against  
the backrest as possible. Adjust the  
distance between the seat and the  
pedals so that legs are slightly angled  
when pressing the pedals. Slide the  
front passenger seat as far back as  
possible.  
To deactivate, turn the child lock to the  
vertical position.  
IMPORTANT  
30) NEVER leave children unattended  
inside the car, let alone leave the car with  
the doors unlocked in a place that children  
can access easily. Children may seriously,  
or even fatally, injure themselves. Also  
ensure that children do not inadvertently  
operate the parking brake, the brake pedal  
or the PRND command of the automatic  
transmission/Electric Drive Unit.  
Set seat height high enough to have  
a clear field of vision on all sides and of  
all display instruments. There should be  
at least one hand of clearance between  
head and the roof frame. Your thighs  
should rest lightly on the seat without  
pressing into it.  
32  
Adjust the head restraint so that its  
upper edge is at upper head level.  
Sit with shoulders as far back against  
the backrest as possible. Set the  
backrest rake so that it is possible to  
easily reach the steering wheel with  
arms slightly bent. Maintain contact  
between shoulders and the backrest  
when turning the steering wheel. Do  
not angle the backrest too far back.  
We recommend a maximum rake of  
approx. 25°.  
Adjust seat and steering wheel in a  
way that the wrist rests on top of the  
steering wheel while the arm is fully  
extended and shoulders are on the  
backrest.  
Adjust the lumbar support so that  
it supports the natural shape of the  
spine.  
Backrest inclination  
33  
JJ000476  
35  
JJ000478  
Pull handle (1) fig. 33, slide seat,  
release handle. Try to move the seat  
back and forth to ensure that the seat  
is locked in place.  
Turn handwheel (3) fig. 35. Do not lean  
on backrest when adjusting.  
POWER SEAT  
ADJUSTMENT  
(where provided)  
Seat height  
40)  
8)  
Longitudinal adjustment  
Manual seat adjustment  
Drive only with engaged seats and  
backrests.  
Longitudinal adjustment  
39)  
34  
JJ000477  
Lever (2) fig. 34 pumping motion  
up: seat higher  
36  
JJ000760  
down: seat lower  
Move the switch fig. 36 forwards /  
backwards.  
33  
Backrest inclination  
Each press changes the heating  
level; the corresponding number of  
indicator lamps come on.  
To switch off the heating, press the  
button until all of the indicator lamps  
are off.  
NOTE The heating works only when the  
outside temperature is below 20°C.  
The settings are memorised when the  
ignition is switched off.  
39  
JJ000763  
MASSAGE  
(where provided)  
37  
JJ000761  
Press or fig. 39.  
: more lumbar support  
: less lumbar support  
Turn the switch fig. 37 forwards /  
backwards.  
Seat height and inclination  
Heating  
(where provided)  
41  
JJ000764  
Activate the back massage function  
by pressing .The LED in the button  
38  
JJ000762  
illuminates to indicate activation.  
The massage function is activated for  
a period of 1 hour. During this time,  
massage is performed in six cycles with  
breaks in between.  
40  
F6S0244  
Move the switch fig. 38 upwards /  
downwards.  
To adjust the heating to the desired  
intensity, proceed as follows:  
Lumbar support  
(where provided)  
press the button  
to the seat (fig. 40).  
corresponding  
Pressing once more deactivates  
massage function. The LED goes off.  
34  
REAR SEATS  
To fold up, raise the backrests and  
guide them into an upright position until  
they engage audibly. Make sure that  
the belts are positioned correctly and  
stay clear of the folding area.  
Removing cover  
The rear seat backrest is divided into  
2/3 to 1/3 parts. Both parts can be  
folded down individually to increase the  
size of the load compartment.  
Before folding rear seat backrests,  
execute the following if necessary:  
Move front seats forward if  
necessary.  
The backrests are properly engaged  
when the red marks (1) fig. 42 near the  
release levers are no longer visible.  
41)  
Remove the load compartment  
cover.  
Press and hold the catch to push the  
head restraints down  
44  
F6S0078  
Unhook retaining straps from tailgate  
fig. 44.  
Folding down/up rear backrests  
9)  
Check that the seat belts are not  
engaged in the seat belt buckles, so  
that the backrests can be moved.  
43  
JJ000438  
The seat belt of the centre seat could  
be blocked when the backrest is folded  
up too quickly. To unlock the retractor,  
push in the seat belt or pull it out by  
approx. 20 mm then release fig. 43.  
45  
JJ000439  
Lift cover toward back (1) fig. 45 and  
push it (2) upwards at the rear.  
Remove the cover.  
LOAD COMPARTMENT  
COVER  
Do not place any objects on the cover.  
42  
JJ000437  
Fitting cover  
Pull the release lever fig. 42 on one  
or both outer sides and fold down the  
backrests onto the seat cushion.  
Engage cover in side guides and fold  
downwards. Attach the retaining straps  
to the tailgate.  
35