REPLACING FUSES
INTRODUCTION
Fuses protect the electric system: they
blow in the event of a failure or
improper action on the system.
When a device does not work, check
the condition of its protective fuse:
the filament A fig. 177 must be intact.
F0V0072
F0V0177
174
176
close the cover B fig. 173 and
secure the roof light into its housing,
making sure it locks properly into place.
replace bulb C fig. 176 releasing the
side contacts, insert the new bulb
and make sure that it is correctly locked
between the contacts;
Removable roof light
To replace the bulb, proceed as follows:
F0V0088
177
If it is not, replace the blown fuse with
another having the same amperage
(same colour).
B intact fuse.
C fuse with damaged filament.
To change a fuse, use the tweezers D
located in the tool box or the Fix &
Go container (for versions/markets
where provided).
F0V0176
175
press button A fig. 175 and extract
the removable roof light B;
26)
remove the roof light, working at the
points indicated by the arrows;
122) 123) 124)
To identify the protective fuse, see the
tables on the following pages.
152
English 