extract the bulb (B) and replace it;
refit the new bulb, put the bulb
holder (A) fig. 194 back into place
and then refit the protective cover (A)
fig. 193 properly.
REPLACING AN
EXTERIOR BULB
For the type of bulb and relevant power
rating, see the “Changing a bulb”
paragraph.
FRONT LIGHT CLUSTERS
The front light clusters fig. 193 contain
sidelight, dipped beam, main beam and
direction indicator bulbs.
195
F0T0095
The bulbs are arranged inside the light
cluster as follows:
(A) Side lights/tail lights and
main/dipped beam headlights;
(B) Direction indicators.
refit the new bulb by inserting it on
connector (B) and then make the
contour of the metallic part mate with
the grooves obtained on the headlight
parabola;
194
F0T0094
DIPPED BEAM/MAIN
BEAM HEADLIGHTS
To change the bulb (double filament),
proceed as follows:
remove the protective cover (A)
fig. 193;
release the bulb holder clip;
extract the bulb (A) fig. 195 from the
connector (B) and replace it;
refit the bulb holder clip and refit the
protective lid (A) fig. 193.
DIRECTION INDICATORS
Front
To replace the bulb, proceed as
follows:
turn the protective lid (B) fig. 193
anticlockwise;
extract the bulb (A) fig. 196 and
193
F0T0093
replace it;
correctly refit the protective cover (B).
SIDE LIGHTS
To replace the bulb, proceed as
follows:
remove the protective cover (A)
fig. 193;
turn the bulb holder (A) fig. 194
anticlockwise and extract it;
155
English 
