Get KNOWING YOUR CAR Guide for Fiat Panda SUV Second Generation (2003-2012)

KNOWING YOUR CAR

In-depth knowledge of your new vehicle

starts here.

DASHBOARD .................................

THE KEYS.......................................

8

9

The handbook that you are reading

simply and directly explains how it

is made and how it works.

IGNITION DEVICE ........................... 10

THE FIAT CODE SYSTEM ............... 11

DOORS........................................... 11

SEATS ............................................ 12

HEAD RESTRAINTS........................ 14

STEERING WHEEL ......................... 15

REAR VIEW MIRRORS.................... 16

EXTERNAL LIGHTS......................... 17

INTERIOR LIGHTS .......................... 19

WINDOW CLEANING...................... 20

CLIMATE CONTROL SYSTEM ........ 22

ELECTRIC WINDOWS .................... 26

BONNET......................................... 26

LUGGAGE COMPARTMENT........... 28

USB PORTS AND AUX INPUT ........ 29

SMARTPHONE DOCKING .............. 30

VERSION WITH LPG SYSTEM........ 31

That’s why we advise you to read it

seated comfortably on board, so that

you can see immediately what is

described here for yourself.

VERSION WITH METHANE

SYSTEM (NATURAL POWER) ......... 33

7

DASHBOARD

The presence and position of controls, instruments and gauges may vary depending on the versions.

F1D0131

1

1. Adjustable air vents 2. Exterior light control stalk 3. Driver front airbag 4. Windscreen wiper/rear window wiper/trip computer control lever

5. Adjustable and directable central air vents 6. Passenger front airbag 7. Glove compartment (for versions/markets, where provided) 8. Radio (for

versions/markets, where applicable) 9. Control buttons 10. Gear lever 11. Heating/ventilation/climate control system controls 12. Ignition device

13. Instrument panel 14. Front electric windows 15. ECO/ASR OFF buttons (for versions/markets, where provided)

8

Briefly press button : unlocking of

doors and luggage compartment, timed

switching-on of internal lights and

double flashing of direction indicators

(for versions/markets, where provided).

Briefly press the button: lock of

doors and luggage compartment with

roof lights off and single flash of

THE KEYS

WARNING

KEY WITHOUT REMOTE

CONTROL

1) Press button B only with the key away

from your body, especially your eyes and

from objects which could get damaged

(e.g. your clothes). Do not leave the key

unattended, to prevent people, especially

children, from inadvertently pressing the

button.

The metal insert of the key activates:

the ignition device, the driver's side and

passenger's side door locks (for

direction indicators (for versions/

markets, where provided).

versions/markets where provided) and

the luggage compartment lock.

Press the

button: remote

KEY WITH REMOTE

CONTROL

(for versions/markets, where provided)

opening of the luggage compartment

and double flashing of the direction

indicators. The direction indicators will

flash twice to indicate that the luggage

compartment has been opened.

WARNING

1) The electronic components inside the

key may be damaged if the key is

subjected to strong shocks. In order to

ensure complete efficiency of the

electronic devices inside the key, it should

never be exposed to direct sunlight.

1)

Metal insert A fig. 2 of the key operates:

the ignition device;

REQUEST FOR

ADDITIONAL KEYS

the driver side door and, for

versions/markets where provided, the

passenger side door.

Should a new mechanical key or a new

key with remote control be necessary,

go to a FIAT Dealership, taking an ID

document and the vehicle ownership

documents. The system can recognise

up to 8 keys with incorporated remote

control.

Press button B fig. 2 to open/close the

metal insert.

WARNING

1) Used batteries must be disposed of, as

specified by law, in the special containers.

Otherwise take them to a Fiat Dealership,

which will deal with their disposal.

F1D0005

2

9

5) Never extract the key while the vehicle is

moving. The steering wheel will

automatically lock as soon as it is turned.

This also applies to cases in which the

vehicle is towed.

STEERING LOCK

IGNITION DEVICE

Engagement

2) 3) 4) 5)

When the key is at STOP, remove the

key and turn the steering wheel until

it locks.

The key can be turned to 3 different

positions fig. 3:

STOP: engine off, key can be

removed, steering column locked.

Some electrical devices (e.g. audio

system, central door locking system,

etc.) can operate;

Disengagement

Move the steering wheel slightly and

turn the key to MAR.

MAR: driving position. All electrical

devices are enabled;

WARNING

AVV: engine starting.

2) If the ignition device is tampered with

(e.g.: attempted theft), have it checked

over by a Fiat Dealership as soon as

possible.

3) When getting out of the vehicle, always

remove the key to prevent any occupants

from accidentally activating the controls.

Remember to engage the handbrake.

Engage first gear if the vehicle is parked

uphill or reverse if the vehicle is parked

downhill. Never leave children unattended

in the vehicle.

F1D0006

3

4) It is absolutely forbidden to carry out any

after-market operation involving steering

system or steering column modifications

(e.g. installation of anti-theft device) that

could adversely affect performance and

safety, invalidate the warranty and also

result in non-compliance of the vehicle with

type-approval requirements.

The ignition switch is fitted with a safety

system that requires the ignition key

to be turned back to STOP if the engine

does not start, before the starting

operation can be repeated.

10

If the

warning light switches on, this

THE FIAT CODE

SYSTEM

DOORS

means that the system is running a

self-diagnosis (for example due to

a voltage drop). Should the fault persist,

contact a Fiat Dealership.

This is an electronic engine locking

system which increases protection

against attempted thefts of the vehicle.

It is automatically activated when the

ignition key is removed.

LOCKING/UNLOCKING

DOORS FROM THE

INSIDE

Push the control lever A fig. 4 towards

the door to lock the doors or pull it

to unlock them. With central door

locking system (for versions/markets,

where provided), operating the lever

A on the driver's side will lock/unlock all

the doors. Operating lever A on the

other doors locks/unlocks only the door

concerned. With mechanical lock,

locking/unlocking takes place operating

the single control levers.

OPERATION

Each time the vehicle is started by

turning the ignition key to MAR, the Fiat

CODE system control unit sends a

recognition code to the Powertrain

Control Module to deactivate the

immobiliser.

The code is sent only if the Fiat CODE

system control unit has acknowledged

the code received from the key.

Each time the ignition key is turned to

STOP, the Fiat CODE system

IMPORTANT The locked door condition

is indicated by the red printing B fig.

4.

deactivates the functions of the

Powertrain Control Module. If, during

starting, the code is not correctly

recognised, the

warning light

switches on in the instrument panel. In

this case, turn the key to STOP and

then to MAR; if it is still locked, try again

with the other keys that come with the

vehicle. Contact a Fiat Dealership if

you still cannot start the engine.

F1D0029

4

11

LOCKING/UNLOCKING

DOORS FROM THE

OUTSIDE

SEATS

Mechanical key: insert the metal

insert in the lock and turn it.

FRONT SEATS

7) 8) 9) 10)

2)

Key with remote control (for

versions/markets where provided):

press the button to lock the doors, or

the button to unlock the doors.

Longitudinal adjustment

Lift lever A fig. 6 and push the seat

forwards or backwards: in the driving

position, you should be able to rest

your arms on the rim of the steering

wheel.

IMPORTANT Before opening a door,

ensure that you can do it in conditions

of safety. Open the doors only when the

vehicle is stationary.

Height adjustment

(for versions/markets, where provided)

CHILD SAFETY DEVICE

6)

Adjust lever B fig. 6 upwards or

downwards to obtain the required

height.

This system prevents the rear doors

from being opened from the inside.

The device B fig. 5 can be engaged

only with the doors open.

IMPORTANT Carry out the adjustment

whilst seated in the driver's seat.

F1D0030

5

position 1 - device engaged (door

locked);

position 2 - device not engaged

(door may be opened from the inside).

The device remains engaged even if the

doors are electrically unlocked.

WARNING

6) Always use this device when carrying

children. After engaging the child lock

on both rear doors, check for effective

engagement by trying to open a door with

the internal handle.

IMPORTANT The rear doors cannot be

opened from the inside when the child

safety device is engaged.

F1D0007

6

12

Backrest angle adjustment

REAR SEATS

Repositioning the backrests

Extending the boot

Operate lever C fig. 7 until the desired

position is reached, then release the

lever.

Move the seat belts to the side, making

sure that they are correctly extended

and not twisted. Lift up the backrest

folded previously until a click is heard

for the engagement mechanism.

3)

Proceed as follows:

remove the rear shelf;

move the seat belts to the side,

making sure that they are correctly

extended and not twisted;

WARNING

if there is a third rear seat (for

versions/markets, where provided),

release the central belt, winding the

buckle into its housing on the roof

panel;

7) All adjustments must be made with the

car stationary.

8) If a side bag is fitted, it is dangerous to

use seat covers not available from

Lineaccessori MOPAR^®.

F1D0008

7

operate the levers at the sides of the

rear seats fig. 9 pushing them towards

the inside of the vehicle, fold the

backrest and then bring the backrest

onto the cushion.

9) Once you have released the adjustment

lever, always check that the seat is locked

on the guides by trying to move it back and

forth. If the seat is not locked into place, it

may unexpectedly slide and cause the

driver to lose control of the car.

FRONT SEAT ELECTRIC

HEATING

(for versions/markets, where provided)

With the ignition key turned to MAR,

press button A or B fig. 8 respectively

to switch the function on.

10) If passengers are seating in the rear

seats, remove all potentially dangerous

objects which may cause injuries in the

event of an accident.

To deactivate the function press the

button again.

F1D0034

9

F1D0145

8

13

REAR HEAD RESTRAINTS

HEAD RESTRAINTS

WARNING

Upwards adjustment: raise the head

restraint until it clicks into place.

Downwards adjustment: press

button A fig. 11 and lower the head

restraint.

11) 12)

FRONT HEAD

RESTRAINTS

2) The fabric upholstery of the seats has

been designed to withstand long-term

wear deriving from normal use of the car.

Some precautions are however required.

Avoid prolonged and/or excessive rubbing

against clothing accessories such as

metal buckles and Velcro strips which, by

applying a high pressure on the fabric in

a small area, could cause it to break,

thereby damaging the upholstery.

Upwards adjustment: raise the head

restraint until it clicks into place.

Downwards adjustment: press

button A fig. 10 and lower the head

restraint.

3) Before tilting the backrest, remove any

objects on the seat cushion.

F1D0012

11

IMPORTANT If the rear seats are used,

always set the head restraints in the

"completely raised" position.

F1D0011

10

Removal

"Anti-Whiplash" device

Proceed as follows to remove the head

restraints:

The head restraints are equipped with

an "Anti-Whiplash" device, which

reduces the distance between head

and head restraint in the event of a rear

impact, thus mitigating the "whiplash"

effect.

raise the head restraints to their

maximum height;

press buttons A and B fig. 11 at the

side of the two supports, then remove

the head restraints by pulling them

upwards.

The head restraint may move when the

backrest is pressed by the occupant’s

torso or hand: this behaviour is caused

by the system and should not be

considered a malfunction.

14

STEERING WHEEL

WARNING

13) 14)

ADJUSTMENTS

11) All adjustments must be made with the

vehicle stationary. Head restraints must

be adjusted so that the head, rather than

the neck, rests on them. Only in this case

can they protect your head correctly.

13) Adjustments must be made only with

the vehicle stationary and engine off.

The steering wheel can be adjusted

vertically.

14) It is absolutely forbidden to carry out

any after-market operation involving

steering system or steering column

modifications (e.g. installation of anti-theft

device) that could adversely affect

performance and safety, invalidate the

warranty and also result in non-compliance

of the vehicle with type-approval

requirements.

To adjust, move lever A fig. 12

downwards to position 1, then adjust

the steering wheel to the most suitable

position and lock it in position by

moving lever A to position 2.

12) To make the best use of the head

restraint's protective action, adjust the

backrest so that your torso is upright and

keep your head as close as possible to the

head restraint.

F1D0013

12

15

IMPORTANT When the heated rear

window is activated, door mirror

defrosting is activated (for versions/

markets, where provided).

REAR VIEW

MIRRORS

INTERIOR MIRROR

Manual folding

The mirror is fitted with a safety device

that causes its release in the event of

a violent impact with the passenger.

Operate lever A fig. 13 to adjust the

mirror into two different positions:

normal or anti-glare.

When required, fold the mirrors toward

the vehicle interior.

IMPORTANT When driving, the mirrors

must always be open.

F1D0015

14

select the desired mirror (left or right)

using selector A fig. 15;

WARNING

move selector A to position B and

manipulate it to adjust the left door

mirror;

15) As the driver's door mirror is curved, it

may slightly alter the perception of

distance.

move selector A to position D and

manipulate it to adjust the right door

mirror.

Once you have finished the adjustment,

return selector A to intermediate

locking position C.

F1D0014

13

DOOR MIRRORS

15)

Manual adjustment

From the inside of the vehicle, operate

lever A fig. 14 to adjust the mirror.

Electric adjustment

(for versions/markets, where provided)

The mirrors can only be adjusted with

the ignition key at MAR.

F1D0016

15

To carry out the adjustment, proceed as

follows:

16

SIDE LIGHTS / DIPPED

BEAM HEADLIGHTS

FLASHING

EXTERNAL LIGHTS

To do this, pull the stalk towards the

steering wheel (unstable position),

regardless of the position of ring nut A

The left stalk fig. 16 controls the

operation of the headlights, side lights,

dipped beam headlights, parking lights,

main beam headlights, direction

indicators, and "Follow me home"

device.

With the ignition key turned to MAR,

turn ring nut A fig. 16 to

. If dipped

beam headlights are activated, the

daytime running lights switch off and

the side lights and dipped headlights

fig. 16. The

on in the instrument panel.

warning light switches

DIRECTION INDICATORS

switch on. The warning light

switches on in the instrument panel.

Bring the stalk to the (stable) position:

upwards: activates the right direction

indicator;

PARKING LIGHTS

These lights can only be turned on with

ignition key in STOP position or

downwards: activates the left direction

indicator.

removed, by moving the ring nut A fig.

16 first to position O and then to

The or warning light will blink on

the instrument panel. The direction

indicators switch off automatically when

the steering wheel is straightened.

position

The

the instrument panel.

.

warning light switches on in

F1D0019

16

"Lane Change" function

MAIN BEAM HEADLIGHTS

To activate the main beam headlights,

If you wish to signal a lane change,

place the left stalk in the unstable

position for less than half a second. The

direction indicator on the side selected

will flash five times and then switch

off automatically.

The exterior lights can only be switched

on when the ignition key is at MAR.

The instrument panel and the various

dashboard controls will come on with

the external lights.

with ring nut A fig. 16 at

, pull the

stalk towards the steering wheel

beyond the end of travel position. The

warning light switches on in the

instrument panel.

SIDE LIGHTS / DAYTIME

RUNNING LIGHTS (DRL)

"Daytime Running Lights"

When the stalk is pulled towards the

steering wheel again, beyond the end

of travel position, the main beam

headlights deactivate, the dipped

headlights reactivate and the

warning light switches off.

(for versions/markets, where provided)

16) 17)

With the ignition key in MAR position

and the ring nut A fig. 16 turned to

O position, the daytime lights switch on

automatically; the other lights and the

internal lighting remain off.

17

"FOLLOW ME HOME"

DEVICE

REAR FOG LIGHTS

Press the button, on the dashboard,

to switch on the rear fog lights.

This allows the space in front of the

vehicle to be lit for a set time.

With rear fog lights on, the

light on the instrument panel will come

on at the same time.

warning

Activation: with the ignition key on

STOP or removed, pull the stalk

towards the steering wheel within 2

minutes from when the engine is turned

off.

FRONT FOG

LIGHTS/REAR FOG

LIGHTS

(for versions/markets, where provided)

Each time the stalk is moved, the lights

stay on for an extra 30 seconds up to

a maximum of 210 seconds; then

the lights are switched off automatically.

Each time the stalk is operated, the

warning light on the instrument

panel switches on and the display also

shows a message and how long the

function will remain active.

F1D0024

17

The fog lights can be activated only

when the dipped beam headlights are

on.

WARNING

16) The daytime running lights are an

To turn on the front/rear fog lights,

press button A fig. 17 as follows:

alternative to the dipped beam headlights

for driving during the daytime in countries

where it is compulsory to have lights on

during the day, and they are also permitted

in those countries where this is not

obligatory.

First pressing: front fog lights on;

second press: rear fog lights on;

third pressing: front/rear fog lights

The

warning light comes on when

off

the stalk is first moved and stays on

until the function is automatically

deactivated. Each time the stalk is

activated it increases the time that the

lights remain on.

With front fog lights on, the

warning

17) Daytime running lights cannot replace

dipped beam headlights when driving at

night or through tunnels. The use of

daytime running lights is governed by the

highway code of the country in which

you are driving. Comply with legal

requirements.

light on the instrument panel will come

on at the same time.

With rear fog lights on, the

warning

Deactivation: keep the stalk pulled

towards the steering wheel for more

than two seconds.

light on the instrument panel will come

on at the same time.

18

pressed to the left (position 0): lights

C and D are always switched off;

ROOF LIGHT TIMING

INTERIOR LIGHTS

On certain versions, to facilitate getting

in/out of the vehicle at night or in

poorly-lit areas, two timed modes have

been provided.

pressed to the right (position 2):

lights C and D are always switched on.

The lights switch on/off gradually.

Switch B positions fig. 19:

FRONT ROOF LIGHT

Singe-bulb roof light

when getting into the vehicle;

when getting out of the vehicle.

The lens of roof light A fig. 18 can be

set to three positions:

central position (position 1): lights C

and D are always switched off;

right side pressed: light always on

left side pressed: light always off

pressed to the left (position 0): light

C switches on;

central position: the light switches

on/off when the doors are opened/

closed.

pressed to the right (position 2): light

D switches on.

F1D0022

19

F1D0021

18

IMPORTANT Before getting out of the

vehicle, make sure that both switches

are in the central position: when the

doors are closed the lights will switch

off to avoid draining the battery. In

any case, if the switch is left in the on

position, the roof light switches off

automatically about 15 minutes after

the engine has been switched off.

Multi-bulb roof light

(for versions/markets, where provided)

Switch A fig. 19 is used to switch on/off

the roof light bulbs.

Switch A positions:

central position (position 1): lights C

and D switch on/off when the doors

are opened/closed;

19

With ring nut A fig. 20 in

position,

in synchronous mode (at half the

speed of the windscreen wiper) when

the windscreen wiper is operating;

WINDOW CLEANING

the windscreen wiper will automatically

adapt its operating speed to the speed

of the vehicle.

WINDSCREEN

WIPER/WASHER

in continuous mode with reverse

gear engaged and the control active.

With the windscreen wiper on and

reverse gear engaged, rear window

wiping will be continuous.

4) 5) 6)

With the windscreen wipers

operational, if reverse gear is engaged,

the rear window wiper is automatically

activated.

This operates only with the ignition key

turned to MAR.

Ring nut A fig. 20 has four different

positions:

Pushing the stalk towards the

dashboard (unstable position) will

activate the rear window washer jet.

Keep the stalk pushed for more than

half a second to activate the rear

window wiper as well. Releasing the

stalk will activate the smart washing

function, as described for the

windscreen wiper.

“Smart washing” function

windscreen wiper off.

Pull the stalk towards the steering

wheel (unstable position) to operate the

windscreen washer.

intermittent operation.

continuous slow operation.

continuous fast operation.

Keeping the stalk pulled for more than

half a second, with just one movement

it is possible to operate the washer

jet and the wiper at the same time.

The windscreen wiper stops working

three strokes after the stalk is released.

A further stroke after approximately 6

seconds completes the cycle.

The function stops when the stalk is

released.

REAR WINDOW

WIPER/WASHER

WARNING

7)

F1D0020

20

4) Do not use the windscreen wiper to

remove layers of snow or ice from the

windscreen. In such conditions, the

windscreen wiper may be subjected to

excessive stress and the motor cut-out

switch, which prevents operation for a few

seconds, may intervene. If operation is

not restored (even after turning the key and

restarting the engine), contact a Fiat

Dealership.

This operates only with the ignition key

turned to MAR.

Turn ring nut B fig. 20 from position O

Move the stalk upwards (unstable

position) to limit operation to the time

for which the stalk is held in this

position. When released, the stalk will

return to its default position and the

windscreen wiper will be automatically

stopped.

to position to operate the rear

window wiper as follows:

in intermittent mode when the

windscreen wiper is not operating;

5) Do not operate the windscreen wiper

with the blades lifted from the windscreen.

20

6) Make sure the device is switched off

whenever the windscreen must be

cleaned.

7) Do not use the rear window wiper to

remove layers of snow or ice. In such

conditions, the wiper may be subjected to

excessive stress and the motor cut-out

switch, which prevents operation for a few

seconds, may intervene. If operation is

not subsequently restored, contact a Fiat

Dealership.

21

CLIMATE CONTROL SYSTEM

18)

2)

MANUAL CLIMATE CONTROL SYSTEM/HEATER

(for versions/markets, where provided)

Controls

2

1

3

0

4

F1D0132

21

A - Air temperature adjustment knob (red-hot / blue-cold).

B - Air recirculation knob:

internal air recirculation.

air intake from outside.

C - Air distribution knob:

air outlet from the central and side vents of the dashboard.

22

air outlet from the footwell and the dashboard vents.

air from footwell diffusers.

air outlet from footwell, windscreen and front side window vents.

air outlet from windscreen vents.

D - Heated rear window and (for versions/markets, where provided) heated mirrors/heated windscreen activation/deactivation.

E - Fan speed adjustment and climate control system activation/deactivation knob (for versions/markets, where provided).

IMPORTANT It is advisable to switch the air recirculation on whilst queuing or in tunnels, or whilst driving on dusty roads, to

prevent the introduction of polluted air. However, it is better not to use the function for long periods, particularly if there are

many people on board, to prevent the windows from misting.

Note To stop the air flow from the vents turn the knob to 0.

ADDITIONAL HEATER

(for versions/markets, where provided)

The additional heater speeds up passenger compartment warming when it is very cold. The heater switches on automatically

according to the environmental conditions, with engine started and when the temperature of the engine coolant is low. The

additional heater turns off automatically after the required comfort conditions are achieved.

The heater only operates if the outside temperature and engine coolant temperature are low. The heater will not activate if the

battery voltage is too low.

23

AUTOMATIC CLIMATE CONTROL SYSTEM

(for versions/markets, where provided)

Controls

F1D0133

22

A - Manual air distribution selection.

By pressing the buttons, one of the five possible air flow distribution patterns can be selected:

air outlet from the windscreen and front side window vents to demist or defrost them.

air outlet from the dashboard central and side vents to ventilate the chest and the face.

air from footwell diffusers. Due to the natural tendency of heat to spread upwards, this type of distribution warms the

passenger compartment up as quickly as possible.

+

air outlet from the footwell vents (warmest air) and the dashboard vents (coolest air).

+

air outlet from footwell, windscreen and front side window vents. This type of distribution achieves effective heating of

the passenger compartment and prevents the windows from misting up.

24

B - Activation/deactivation of the MAX-DEF function (fast front window defrosting/demisting).

C - Climate control system compressor activation/deactivation.

D - Internal air recirculation activation/deactivation button.

E - Climate control on/off.

F - Heated rear window and (for versions/markets, where provided) heated mirrors/heated windscreen activation/deactivation.

G/M - Fan speed adjustment knob.

H - AUTO function activation (climate control system automatic operation).

I/L - Adjustment of temperature inside the passenger compartment.

The automatic climate control manages the Start&Stop function (engine off when the car speed is zero) to guarantee a suitable

comfort inside the passenger compartment.

NOTE In particularly severe climate conditions it is recommended to limit the use of the Start&Stop function to prevent the

compressor from continuously switching on and off, with consequent rapid misting of the windows and accumulation of

humidity with unpleasant smells in the passenger compartment.

WARNING

18) It is advisable not to use the internal air recirculation function when the outside temperature is low, because the windows could mist

rapidly.

WARNING

2) The system uses a coolant that is compatible with the laws in force in countries where the vehicle is sold, R134a or R1234yf. In case of a

recharge operation, only use the gas indicated on the label placed in the engine compartment. The use of other coolants affects the efficiency

and condition of the system. The lubricant used for the compressor is also strictly linked to the type of cooling gas, please refer to a Fiat

Dealership.

25

MANUAL REAR WINDOW

WINDERS

ELECTRIC WINDOWS

BONNET

OPENING

ELECTRIC FRONT

WINDOWS

To open/close the window operate the

handle on the door panel.

Proceed as follows:

19) 20)

pull lever A fig. 24 in the direction

indicated by the arrow;

These operate when the ignition key is

turned to MAR and for about three

minutes after turning the ignition key to

STOP or removing it.

WARNING

19) Improper use of the electric windows

can be dangerous. Before and during

operation, always check that nobody is

exposed to the risk of being injured either

directly by the moving window or through

objects getting caught or hit by it.

The electric window control buttons are

located beside the gear lever fig. 23

and activate:

A

Opening/closing of the left window.

20) When leaving the vehicle, always

remove the ignition key to avoid the risk of

injury for people still on board due to

accidental operation of the electric

windows.

B Opening/closing of the right

window.

With the ignition key at MAR, a long

press activates the automatic operation

of the window: raising/lowering on the

driver's side and lowering only on

the passenger side.

F1D0035

24

move lever B fig. 25 to the left;

F1D0036

25

F1D0031

23

26

lift the bonnet and, at the same time,

release the supporting rod C fig. 26

from its catch D, then insert the end of

the rod into housing E in the bonnet

(large hole) and push to safety position

(small hole).

CLOSING

Proceed as follows:

WARNING

keep the bonnet raised with one

hand and remove rod C fig. 26 from

housing E with the other, inverting the

opening motion, then fit it back into

its catch D;

21) Incorrect positioning of the supporting

rod may cause the bonnet to drop

suddenly.

22) Use both hands to lift the bonnet.

Before lifting, check that the windscreen

wiper arms are not raised from the

windscreen, that the vehicle is stationary

and that the handbrake is engaged.

lower the bonnet to approximately

20 centimetres from the engine

compartment and let it drop. Make sure

that the bonnet is completely closed

and not only fastened by the locking

device by trying to open it. If it is not

perfectly closed, do not try to press the

bonnet lid down but open it and repeat

the procedure.

23) Perform these operations only with

vehicle stationary.

24) For safety reasons, the bonnet must

always be properly closed while driving.

Therefore, make sure that the bonnet

is properly closed and that the lock

is engaged. If you discover that the bonnet

is not perfectly closed during travel, stop

immediately and close the bonnet in the

correct manner.

23) 24)

IMPORTANT Always check that the

bonnet is closed correctly to prevent it

from opening while the vehicle is

travelling.

The following plate fig. 27 is applied

inside the engine compartment:

F1D0037

26

21) 22)

F1D1000

27

With electric handle (soft touch)

(for versions/markets, where provided)

Emergency opening from the inside

LUGGAGE

COMPARTMENT

Proceed as follows:

For versions with soft touch electrical

handle, the tailgate (when unlocked)

can only be opened from outside the

vehicle using the electric opening

handle A fig. 28 located under the

handle until a click is heard, which

indicates unlocking. The tailgate can be

opened at any time, if the doors are

unlocked. To open it, enable the

handle, opening one of the front doors

or unlocking the doors with the remote

control or using the key without remote

control.

remove the rear head restraints and

fully fold the seats;

The luggage compartment unlocking is

electrically operated and is deactivated

when the vehicle is in motion.

remove the protective cap and

release the lock using a screwdriver or

the metal insert of the key fig. 29.

OPENING

25)

By mechanical key

On versions with mechanical key, the

luggage compartment can be opened

from outside the vehicle, inserting

the metal insert of the key in the latch

on the tailgate handle and rotating.

With remote control

(for versions/markets, where provided)

F1D0033

29

The luggage compartment is unlocked

by pressing the

CLOSING

button on the

remote control. The direction indicators

will blink twice.

26)

Pull the grab handle located inside the

tailgate.

IMPORTANT Before closing the

F1D0032

28

luggage compartment make sure that

you have the keys since the luggage

compartment is automatically locked.

28

LUGGAGE

COMPARTMENT

INITIALISATION

an accessory USB port on the

dashboard fig. 31 with the sole function

of recharging external devices

(smartphone etc.).

USB PORTS AND

AUX INPUT

(for versions/markets, where provided)

IMPORTANT If the battery is

Depending on the trim level, the vehicle

may be equipped with:

disconnected or the protection fuse

blows, the luggage compartment

opening/closing mechanism must be

reinitialised as follows: close all the

doors and the tailgate, press the

button on the remote control, then

press the button

27) 28) 29)

WARNING

F1D0698

30

25) Take care not to knock objects on the

roof rack when opening the tailgate.

a USB port/main AUX input fig. 30.

The AUX input for connection of

external devices (iPod, music players,

etc.) and the USB port for the transfer

of data from a USB Pen Drive or other

source (smartphone etc.) and slow

recharging;

26) With the engine on, always make sure

that the tailgate is closed: exhaust gases

could be drawn inside the load

compartment.

27) Every attachment has a maximum load

capacity of 100 kg.

28) A heavy load that has not been

secured may cause serious injuries in the

event of an accident.

29) If you are travelling in an area with

limited opportunities for vehicle refuelling

and you wish to bring petrol with you in

a petrol can, you must do so in compliance

with current regulations and using an

approved can, appropriately secured to the

load securing attachments. Anyway, by

doing so, you increase the risk of fire in the

event of an accident with your vehicle.

F1D0697

31

29

SMARTPHONE

DOCKING

(for versions/markets, where provided)

Depending on the trim level, the vehicle

may be equipped with a smartphone

docking station to be installed on the

dashboard.

Installing/uninstalling

the station

F1D0700

F1D0699

33

35

Install the smartphone docking station

by inserting it in the specific seat on the

dashboard, illustrated in fig. 32 (click

fit).

Inserting/removing the

smartphone

lay the smartphone on the front

base and release it. The load on the

spring inside the docking station will

allow the gripping hand to close;

To insert the smartphone in the docking

station:

block the smartphone by turning the

ring nut A fig. 34 so that it clicks into

position

B

F1D0702

32

F1D0703

34

To remove the docking station, press

both side buttons fig. 33simultaneously.

ensure that the ring nut A fig. 34 is

turned to position

;

F1D0701

36

insert the smartphone horizontally in

its seat, placing it on the base of the

docking station, and press to open the

gripping hand fig. 35;

Note When the smartphone docking

station is not in use, it is recommended

to remove it from its seat to avoid

noise and/or vibrations.

The rear knob B fig. 36 allows

possible adjustments depending on the

weight and geometry of the

smartphone.

30

To remove the smartphone from the

docking station:

VERSION WITH LPG

SYSTEM

turn the ring nut A fig. 34 so that it

clicks into position

,

30) 31) 15)

11) 12) 13) 14)

take out the smartphone by pressing

it down to open the gripping hand;

INTRODUCTION

remove the smartphone from the

docking station and release it. The load

on the spring inside the docking station

will allow the gripping hand to close

after the phone has been removed.

The LPG version features two fuel

supply systems: one for petrol and one

for LPG.

F1D0112

38

Although the LPG system has

LPG TANK

numerous safety features, it is advisable

to proceed as follows every time the

vehicle is not in use for a long period or

moved in an emergency as a result of

a breakdown or accident:

8) 9) 10)

15)

The vehicle has a (pressurised) tank A

fig. 39 for collecting LPG in a liquid

state. It is ring-shaped and is located in

the spare wheel compartment with

suitable protection.

WARNING

unscrew the fixing devices A fig. 37,

then remove the cover B;

8) When the vehicle is moving, the

smartphone must be used in the docking

station only in a horizontal position and

without any inclination (see fig. 35). Any

other position of the docking station is

allowed only with the vehicle stopped, with

the sole purpose of facilitating the insertion

of the smartphone in the station.

close the LPG cock by rotating the

ring nut C fig. 38 clockwise;

refit the cover and retighten the

fastening devices.

9) The maximum dimensions of the usable

smartphones are: 67 mm (width) and 11

mm (depth).

10) The maximum weight of smartphone

that can be installed is 180 g.

F1D0113

39

F1D0111

37

31

LPG tank certification

To guarantee switching in full safety, the

actual change to the chosen fuel

system takes place depending on the

car usage conditions; it may not

therefore be immediate.

WARNING

The LPG tank is certified in accordance

with the regulations in force.

In Italy, the tank has a life of 10 years

starting from the vehicle registration

date. If the vehicle has been registered

in a country other than Italy, the

duration and the testing/inspection

procedures of the LPG tank can vary

depending on the national laws of that

country. In any case, when the time limit

in the individual country has run out,

contact a Fiat Dealership to have the

tank replaced.

30) It should be pointed out that in some

countries (including Italy) there are legal

restrictions in force for parking/garaging

motor vehicles with gas that has a higher

density than air; LPG comes under this

category.

Switching is confirmed by the switching

on/off of the green warning light

the instrument panel.

on

If the LPG runs out, switching to petrol

takes place automatically. In this case

the display shows the icon just

above wording LPG and the four bars

of the digital gauge turn off.

31) Modifications or repairs to the fuel

system that are not carried out correctly or

do not take the system technical

specifications into account can cause

malfunctions leading to a fire risk.

32) Do not switch between the two

operating modes whilst starting the engine.

SUPPLIES

19) 20)

SELECTION OF

PETROL/LPG SUPPLY

TYPE

LPG

Maximum refuelling capacity (reserve

included): 30.5 litres. The figure already

takes into account the 80% tank filling

limit and the residual fluid required

for correct priming and it is the

WARNING

32)

16) 17) 18)

The (petrol/LPG switch) button A fig. 40

allows drivers to select petrol or LPG

operation.

11) The system operates at temperatures

ranging between −20 °C and 100 °C.

12) If, during LPG operation, the same runs

out, the vehicle switches to petrol

automatically and all the bars of the digital

gauge on the display switch off; this

displaying remains until the following LPG

refuelling.

maximum permitted capacity. In

addition, after different refuelling

processes, this figure may vary due to

differences between the network pump

supply pressures, pumps having

different supply/locking features, tank

not completely run out of fuel.

F1D0109

40

32

13) The vehicle is equipped with a gaseous

LPG injection system designed specifically

for it: it is therefore absolutely forbidden

to alter the configuration of the system or

its components. The use of other

components or materials could cause

malfunctions and lead to a reduction in

safety; therefore, in the case of problems,

contact a Fiat Dealership. To prevent

damage to the gas system parts when

towing or raising the vehicle, follow the

instructions in the "Towing the vehicle"

paragraph of the Owner Handbook.

17) When switching from petrol to LPG is

requested, a metal noise from the valves

which pressurise the circuit can be heard.

As a result of the switching logic described

above, the delay between the ticking of

the valve and the switching off of the green

VERSION WITH

METHANE SYSTEM

(Natural Power)

warning light on the instrument panel

is entirely normal.

33) 34) 35)

21)

INTRODUCTION

18) In particular usage conditions, such as

starting and operation at low ambient

temperature or LPG supply with low

The "Natural Power" version features

two fuel systems, one for petrol and

one for natural gas (methane).

propane content, the system may switch

temporarily to petrol operation, without

an indication of switching on the instrument

panel. In the event of low LPG levels in

the tank or request for high performance

(e.g. overtaking, vehicle fully laden, steep

hills), the system may automatically switch

to petrol operation to guarantee the engine

power requested; the green warning light

on the instrument panel switches on

14) When painting in an oven, the LPG

tank must be removed from the vehicle and

later refitted by a Fiat Dealership. Although

the LPG system has numerous safety

features, it is advisable to proceed

as follows every time the vehicle is not in

use for a long period or moved in an

emergency as a result of a breakdown or

accident: unscrew the fastening devices A

fig. 37, then remove the cover B. Close

the LPG cock rotating the ring nut C fig. 39

clockwise. Refit the cover and retighten

the fastening devices.

METHANE CYLINDERS

The vehicle is equipped with two

cylinders (total capacity about 72 litres)

fig. 41 - fig. 42 located under the floor

of the vehicle and protected by two

special guards.

to indicate this. When the above conditions

are no longer present, the system

automatically restores LPG operation; the

green warning light

switches off. To

achieve the automatic switching described

above, make sure that there is always

enough fuel in the petrol tank.

15) Periodically (at least once every six

months), it is advisable to let the LPG in the

tank run out and, at the next refuelling,

check that it does not exceed the

maximum capacity of 30.5 litres (reserve

included) (with a tolerance of 2 litres

excess) (see instructions in the "Capacities"

paragraph of this Supplement). If the level

is above 30.5 litres (reserve included)

contact a Fiat Dealership immediately.

19) Only use LPG for motor vehicles.

20) It is strictly forbidden to use any

additive in the LPG.

F1D0137

41

16) Regardless of the last fuel system

used, at the following engine starting, after

the initial petrol stage, the system will

automatically switch to LPG.

33

IMPORTANT If the vehicle has been

registered in a country other than Italy,

the certification data, identification

and inspection procedures for

To guarantee switching in full safety, the

actual change to the chosen fuel

system takes place depending on the

car usage conditions; it may not

therefore be immediate.

the methane cylinders should conform

to the legislation in that country. In

any case, remember that the life of the

cylinders is 20 years from the

Switching is confirmed by the switching

on/off of the green warning light

the instrument panel.

on

production date as set out in ECE

Regulation no. 110.

In addition, when starting at outside

temperatures below approximately

–10°C, the switching times from petrol

to methane increase to allow the

pressure regulator/reduction unit to

heat up.

F1D0138

42

SELECTION OF

PETROL/METHANE

SUPPLY TYPE

The methane, stored in the cylinders at

high pressure, flows through a

dedicated pipe to reach the pressure

regulator/reduction unit which supplies

the two methane injectors at low

pressure (about 9 bar).

36)

22) 23) 24)

If the methane has run out, switching to

petrol takes place automatically. In this

case, the four bars of the digital gauge

switch off and the green warning light

on the instrument panel switches on.

This engine normally runs on methane

except during starting, when it runs

on petrol.

Cylinder certification

The (petrol/methane switch) button A

fig. 43 allows drivers to select petrol or

methane operation.

The methane cylinders are certified in

accordance with ECE Regulation no.

110.

SUPPLIES

Methane

The cylinders must be inspected, in

accordance with ECE Regulation

Procedure no. 110, every 4 years from

the vehicle registration date or in

accordance with specific regulations in

individual countries.

Capacity: about 12 kg. The total

volume of cylinders is about 72 litres.

The plates provided by the Dealership

with the on board documentation

contain the date for the first inspection

of the cylinders. Methane refuelling

stations are not authorised to refill the

cylinders when the inspection date has

expired.

F1D0109

43

34

24) In particular usage conditions, such as

starting and operation at low ambient

temperature, the system may switch

temporarily to petrol operation, without

indicating the performed switching. In the

event of low methane levels in the tank

or request for high performance (e.g.

overtaking, vehicle fully laden, steep hills),

the system may automatically switch to

petrol operation to guarantee the engine

power requested; the green warning light

on the instrument panel switches on

to indicate this. When the above conditions

are no longer present, the system

WARNING

33) The Fiat Panda Natural Power is

equipped with a high pressure methane

fuel supply system, designed to operate at

a rated pressure of 200 bar. It is dangerous

to stretch the system with higher

pressures. To prevent damage to the

methane system parts when towing or

raising the vehicle, follow the instructions in

the "Towing the vehicle" paragraph of the

Owner Handbook. If there is a problem

with the methane system, only contact a

Fiat Dealership. Do not alter the methane

system configuration or components; they

are designed exclusively for the Fiat Panda

Natural Power. The use of other

21) If, during methane operation, the same

runs out, the vehicle switches to petrol

automatically and all the bars of the digital

gauge on the display switch off; this

displaying remains until the next methane

refuelling.

22) Regardless of the last fuel system

used, at the following engine starting, after

the initial petrol stage, the system will

automatically switch to methane.

automatically restores methane operation;

the green warning light

switches off.

23) When switching from petrol to methane

is requested, a metal noise from the valves

which pressurise the circuit can be heard,

as it happens while starting the vehicle.

As a result of the switching logic described

above, the delay between the ticking of

the valve and the switching off of the green

To achieve the automatic switching

described above, make sure that there is

always enough fuel in the petrol tank.

components or materials could cause

malfunctions and reduce safety.

34) In the case of painting in an oven, the

cylinders should be removed from the

vehicle and refitted later by a Fiat Dealer.

Although the methane system has

warning light on the instrument panel

is entirely normal.

numerous safety features, it is advisable to

close the manual cocks for the cylinders

every time the vehicle is not in use for

a long period, transported on other

vehicles or moved in an emergency as a

result of a breakdown or accident.

35) Modifications or repairs to the fuel

system that are not carried out correctly or

do not take the system technical

specifications into account can cause

malfunctions leading to a fire risk.

36) Do not switch between the two

operating modes whilst starting the engine.

35

KNOWING YOUR CAR for Your Fiat Panda SUV Second Generation (2003-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals