SMARTPHONE
DOCKING
(for versions/markets, where provided)
Depending on the trim level, the vehicle
may be equipped with a smartphone
docking station to be installed on the
dashboard.
Installing/uninstalling
the station
F1D0700
F1D0699
33
35
Install the smartphone docking station
by inserting it in the specific seat on the
dashboard, illustrated in fig. 32 (click
fit).
Inserting/removing the
smartphone
lay the smartphone on the front
base and release it. The load on the
spring inside the docking station will
allow the gripping hand to close;
To insert the smartphone in the docking
station:
block the smartphone by turning the
ring nut A fig. 34 so that it clicks into
position
B
F1D0702
32
F1D0703
34
To remove the docking station, press
both side buttons fig. 33simultaneously.
ensure that the ring nut A fig. 34 is
turned to position
;
F1D0701
36
insert the smartphone horizontally in
its seat, placing it on the base of the
docking station, and press to open the
gripping hand fig. 35;
Note When the smartphone docking
station is not in use, it is recommended
to remove it from its seat to avoid
noise and/or vibrations.
The rear knob B fig. 36 allows
possible adjustments depending on the
weight and geometry of the
smartphone.
30
English 
