With ring nut A fig. 20 in
position,
in synchronous mode (at half the
speed of the windscreen wiper) when
the windscreen wiper is operating;
WINDOW CLEANING
the windscreen wiper will automatically
adapt its operating speed to the speed
of the vehicle.
WINDSCREEN
WIPER/WASHER
in continuous mode with reverse
gear engaged and the control active.
With the windscreen wiper on and
reverse gear engaged, rear window
wiping will be continuous.
4) 5) 6)
With the windscreen wipers
operational, if reverse gear is engaged,
the rear window wiper is automatically
activated.
This operates only with the ignition key
turned to MAR.
Ring nut A fig. 20 has four different
positions:
Pushing the stalk towards the
dashboard (unstable position) will
activate the rear window washer jet.
Keep the stalk pushed for more than
half a second to activate the rear
window wiper as well. Releasing the
stalk will activate the smart washing
function, as described for the
windscreen wiper.
“Smart washing” function
windscreen wiper off.
Pull the stalk towards the steering
wheel (unstable position) to operate the
windscreen washer.
intermittent operation.
continuous slow operation.
continuous fast operation.
Keeping the stalk pulled for more than
half a second, with just one movement
it is possible to operate the washer
jet and the wiper at the same time.
The windscreen wiper stops working
three strokes after the stalk is released.
A further stroke after approximately 6
seconds completes the cycle.
The function stops when the stalk is
released.
REAR WINDOW
WIPER/WASHER
WARNING
7)
F1D0020
20
4) Do not use the windscreen wiper to
remove layers of snow or ice from the
windscreen. In such conditions, the
windscreen wiper may be subjected to
excessive stress and the motor cut-out
switch, which prevents operation for a few
seconds, may intervene. If operation is
not restored (even after turning the key and
restarting the engine), contact a Fiat
Dealership.
This operates only with the ignition key
turned to MAR.
Turn ring nut B fig. 20 from position O
Move the stalk upwards (unstable
position) to limit operation to the time
for which the stalk is held in this
position. When released, the stalk will
return to its default position and the
windscreen wiper will be automatically
stopped.
to position to operate the rear
window wiper as follows:
in intermittent mode when the
windscreen wiper is not operating;
5) Do not operate the windscreen wiper
with the blades lifted from the windscreen.
20
English 
