With the ring nut in position
, the
INTERIOR LIGHTS
WINDOW CLEANING
windscreen wiper will automatically
adapt its operating speed to the speed
of the vehicle. With the windscreen
wipers operational, if reverse gear
is engaged, the rear window wiper is
automatically activated.
2) 3) 4)
This operates only with the ignition key
turned to MAR.
FRONT ROOF LIGHT WITH SPOT
LIGHTS
Operation of switch A fig. 19:
WINDSCREEN
WIPER/WASHER
switch pressed on the right: lamps C
and D always on;
"Smart washing" function: pull the
stalk towards the steering wheel
(unstable position) to operate the
windscreen washer. Keeping the stalk
pulled for more than half a second, with
just one movement it is possible to
operate the washer jet and the wiper at
the same time. The windscreen wiper
stops working three strokes after the
stalk is released. A further stroke after
approximately 6 seconds completes
the cycle.
Positions of the ring nut fig. 20:
windscreen wiper off.
switch pressed on the left: lamps C
and D always off;
intermittent operation.
continuous slow operation.
continuous fast operation.
Switch A in the central position:
lights C and D switch on/off when the
front doors are opened/closed.
REAR WINDOW
WIPER/WASHER
4)
F1E0632
Activation
20
F1E0049
19
Turn the ring nut from position O to
Move the stalk to position A fig. 20 to
limit operation to the time for which the
stalk is held in this position. When
released, the stalk will return to
position to operate the rear window
wiper as follows:
The lights switch on/off gradually. With
courtesy light off, switch B fig. 19
turns on lamp C when pressed to the
left or lamp D when pressed to the
right.
in intermittent mode when the
windscreen wiper is not operating;
its default position and the windscreen
wiper will be automatically stopped.
in synchronous mode (at half the
speed of the windscreen wiper) when
the windscreen wiper is operating;
19
English 
