GETTING TO KNOW YOUR CAR -> DOOR MIRRORS for Your Fiat Tipo 4 Door Second Generation (2015-2026)

The electrochromic mirror has an  
ON/OFF button to activate/deactivate  
the electrochromic anti-glare function.  
STEERING WHEEL  
the warranty and also result in non-  
compliance of the car with type-approval  
requirements.  
18) 19)  
ADJUSTMENTS  
The steering wheel can be adjusted  
both in height and axially.  
REAR-VIEW  
MIRRORS  
They have a safety device that causes  
their release in the event of a violent  
impact with the passenger.  
INTERIOR MIRROR  
Manual adjustment  
27  
04106J0002EM  
Operate lever (1) fig. 26 to adjust the  
mirror into two different positions:  
normal or anti-glare.  
When reverse is engaged, the mirror is  
automatically set for daytime use.  
25  
P2000291  
DOOR MIRRORS  
To carry out the adjustment move the  
lever (1) fig. 25 downwards in position  
(B), then adjust the steering wheel to  
the most suitable position and then  
lock it in this position moving the lever  
(1) again in position (A).  
20)  
Electric adjustment  
The mirrors can only be adjusted with  
the ignition device at MAR and for  
about 3 minutes after the ignition  
device switches to STOP (or with the  
key removed).  
26  
04106J0001EM  
When one of the front doors is opened  
this operation is disabled.  
IMPORTANT  
Electrochromic mirror  
(where provided)  
To carry out the adjustment, proceed  
as follows:  
18) All adjustments must be carried out  
only with the car stationary and engine off.  
19) It is absolutely forbidden to carry  
out any after-market operation involving  
steering system or steering column  
modifications (e.g.: installation of  
The electrochromic mirror can  
automatically modify its reflecting action  
to prevent dazzling the driver fig. 27.  
use switch (1) fig. 28 to select the  
mirror (left or right) to be adjusted;  
adjust the mirror by moving the  
switch (2) fig. 28 in the four directions.  
anti-theft device) that could badly affect  
performance and safety, invalidate  
22  
the light sensitivity set in the display  
Menu or Uconnect™ system (where  
provided).  
IMPORTANT  
20) As the driver's door mirror is curved,  
it may slightly alter the perception of  
distance.  
The higher the sensitivity, the lower  
the amount of external light needed to  
automatically switch the external lights  
on.  
EXTERNAL LIGHTS  
Function activation  
Turn the left stalk ring to position  
The left stalk (1) fig. 30 operates most  
of the exterior lights.  
.
28  
04106J0003EM  
The external lights turn on also with  
the ignition key in the MAR position.  
The instrument panel and the various  
dashboard controls will come on with  
the external lights.  
WARNING The function can only be  
activated with the ignition device at  
MAR.  
Manual folding  
When required (for example when  
the mirror causes difficulty in narrow  
spaces ) it is possible to fold the mirrors  
manually moving them from position (A)  
to position (B) fig. 29.  
Function deactivation  
To deactivate the function, turn the left  
stalk ring to a position other than  
.
DIPPED BEAM  
HEADLIGHTS  
With the ignition key turned to MAR,  
turn the ring (1) fig. 30 to  
. If the  
dipped beam headlights are activated,  
the daytime running lights are switched  
off and the dipped beam headlights,  
rear side lights and number plate lights  
30  
P2000261  
AUTO FUNCTION  
(Dusk sensor)  
(where provided)  
are switched on. The warning light  
switches on in the instrument panel.  
29  
04106J0004EM  
This is an infrared LED sensor  
that works in conjunction with the  
rain sensor and is located on the  
windscreen. It is able to detect  
variations in outside lighting based on  
23