GETTING TO KNOW YOUR CAR -> ELECTRIC WINDOWS for Your Fiat Tipo 4 Door Second Generation (2015-2026)

compartment most quickly, giving a  
prompt sensation of warmth.  
Start&Stop  
(where provided)  
1 - passenger compartment  
temperature adjustment knob; the set  
temperature is shown on the display;  
2 - MAX A/C function on button;  
3 - climate control compressor on/off  
button;  
+
Air flow distributed between  
The automatic climate control system  
manages the Start&Stop system  
(engine off when vehicle speed is equal  
to 0 km/h) to ensure adequate comfort  
inside the vehicle.  
footwell diffusers (hotter air) and central  
and side dashboard vents (cooler air).  
This air distribution setting is useful in  
spring and autumn on sunny days.  
4 - button for activating the MAX  
DEF function (fast front window  
defrosting/demisting);  
+
Air flow distributed between  
When the Start&Stop system is on  
(engine off and car at a standstill), the  
automatic recirculation management  
is turned off always taking air in from  
outside, to reduce the probability  
of the windows misting up (as the  
compressor is off).  
footwell vents and windscreen and  
front side vents. This distribution setting  
allows the passenger compartment to  
be warmed effectively and prevents the  
windows from misting.  
5 - climate control system on/off  
button;  
6 - fan speed adjustment knob; the set  
speed is shown on the display;  
7 - air distribution selection buttons;  
8 - heated rear window on/off button;  
9 - internal air recirculation on/off  
button;  
In AUTO mode, the climate control  
system automatically manages air  
distribution (the LEDs on buttons 7  
are off). When set manually, the air  
distribution is indicated by the LEDs on  
the selected buttons switching on.  
In combined function mode the relevant  
function is enabled simultaneously  
with those already set by pressing  
the corresponding button. If a button  
whose function is already active is  
pressed, the operation is cancelled and  
the corresponding LED switches off.  
To restore automatic control of the air  
distribution after a manual selection,  
press the AUTO button.  
ELECTRIC WINDOWS  
26)  
The control buttons are located on the  
door panel trim.  
10 - AUTO function activation button  
(automatic operation).  
Electric windows operate with the  
ignition device at MAR and for about  
3 minutes after the ignition device  
switches to STOP (or key removed).  
When one of the front doors is opened  
this operation is disabled.  
Air distribution selection  
By pressing the buttons  
/
/
, it  
is possible to set one of the 5 possible  
air distributions manually:  
Air flow to the windscreen  
and front side window vents to  
demist/defrost them.  
Air flow at central and side  
dashboard vents to ventilate the chest  
and the face during the hot season.  
Airflow to the front and rear  
DRIVE SIDE FRONT  
DOOR CONTROLS  
All windows can be controlled from the  
driver side door panel fig. 46.  
footwell air vents. This air distribution  
setting heats the passenger  
36  
The trims of the rear door panels  
include the buttons for controlling the  
relevant windows.  
BONNET  
DOOR  
Proceed as follows:  
pull the lever (1) fig. 47, located in the  
driver's side pedal area, in the direction  
of the arrow;  
IMPORTANT  
26) Incorrect use of the electric windows  
may be dangerous. Before and during  
operation, always check that nobody  
is exposed to the risk of being injured  
either directly by the moving window or  
through objects getting caught or hit by it.  
When leaving the vehicle (equipped with  
mechanical key with remote control),  
always remove the key from the ignition  
device to prevent accidental operation of  
the electric windows from being a hazard  
for those still on board.  
46  
04166J0001EM  
1: front left window opening/closing.  
"Continuous automatic" operation  
during the window opening/closing  
stage;  
2: front right window  
opening/closing. "Continuous  
automatic" operation during the  
window opening stage;  
3: enabling/disabling of rear door  
electric window controls;  
4: right rear window opening/closing  
(if present);  
47  
04196J0001EM  
operate the lever (2) fig. 48 in the  
direction indicated by the arrow;  
5: left rear window opening/closing (if  
present).  
FRONT PASSENGER  
SIDE DOOR AND REAR  
DOOR CONTROLS  
On the passenger side front door  
control panel, buttons are provided to  
control the associated windows.  
48  
P2000279  
lift the bonnet and at the same time  
release the support rod (3) fig. 49 from  
37