Get GETTING TO KNOW YOUR CAR -> EXTERNAL LIGHTS Guide for Fiat Tipo 4 Door Second Generation (2015-2026)

the light sensitivity set in the display

Menu or Uconnect™ system (where

provided).

IMPORTANT

20) As the driver's door mirror is curved,

it may slightly alter the perception of

distance.

The higher the sensitivity, the lower

the amount of external light needed to

automatically switch the external lights

on.

EXTERNAL LIGHTS

Function activation

Turn the left stalk ring to position

The left stalk (1) fig. 30 operates most

of the exterior lights.

04106J0003EM

The external lights turn on also with

the ignition key in the MAR position.

The instrument panel and the various

dashboard controls will come on with

the external lights.

WARNING The function can only be

activated with the ignition device at

MAR.

Manual folding

When required (for example when

the mirror causes difficulty in narrow

spaces ) it is possible to fold the mirrors

manually moving them from position (A)

to position (B) fig. 29.

Function deactivation

To deactivate the function, turn the left

stalk ring to a position other than

DIPPED BEAM

HEADLIGHTS

With the ignition key turned to MAR,

turn the ring (1) fig. 30 to

. If the

dipped beam headlights are activated,

the daytime running lights are switched

off and the dipped beam headlights,

rear side lights and number plate lights

P2000261

AUTO FUNCTION

(Dusk sensor)

(where provided)

are switched on. The warning light

switches on in the instrument panel.

04106J0004EM

This is an infrared LED sensor

that works in conjunction with the

rain sensor and is located on the

windscreen. It is able to detect

variations in outside lighting based on

DAYTIME RUNNING

LIGHTS (DRL) "Daytime

Running Lights"

left stalk fig. 30 to or turn the ignition

device to the STOP position.

21) 22)

With the key in MAR position and the

ring turned to the position, the

daytime running lights and the rear side

lights switch on automatically; the

other lights and the internal lighting

remain off. If the daytime running lights

are deactivated (for versions/markets

where it is provided), no light comes on

P2001050

Cornering lights

P2001051

when the ring is turned to

The function activates with the main

beam headlights switched on with a

speed lower than 40 km/h. For wide

steering wheel rotation angles or at the

switching on the direction indicator, a

light will turn on (built in the front fog

light) referring to the turning side which

will extend the night visibility angle.

PARKING LIGHTS

FOG LIGHTS

(where provided)

These lights can be turned on only

with the ignition device at STOP or key

extracted by turning the ring on the

left stalk first to position and then to

The fog lights button is located on the

left control panel (button (1) fig. 31).

With fog lights on, the warning light

on the instrument panel will switch on.

With the ignition device in MAR, with

the side lights and dipped beam

headlights on, press button (1) to turn

on the fog lights.

positions

The warning light switches on in the

instrument panel.

REAR FOG LIGHT

(where provided)

Repeat the same operation to switch

them off.

The rear fog light button is located on

the left control panel (button (1) fig. 32).

With rear fog lights on, the warning light

on the instrument panel will come

on at the same time.

An acoustic warning will sound with

the parking lights on when the driver's

door is opened. The acoustic warning

switches off as soon as the driver's

door is closed.

To switch off the fog lights, press

button (1) again or turn the ring of the

left stalk fig. 30 to or turn the ignition

device to the STOP position.

With the ignition device in MAR, with

the dipped beam headlights and or fog

lights on, press button (1) to turn on the

rear fog lights.

"FOLLOW ME HOME"

DEVICE

Activation

To switch off the rear fog light, press

button (1) again or turn the ring of the

Take the ignition device to STOP.

“Multimedia” section for further

information.

Within 2 minutes pull the left stalk

in main beam headlights flashing

mode, each displacement of the stalk

will correspond to an increment of

30 seconds of delay on headlights

switching off up to a maximum of 210

seconds (equal to 7 flashes).

indicator;

downwards: activates the left

direction indicator.

Broken, muddy or obstructed

headlights and side lights of vehicles

in the field of view of the camera will

cause headlights to remain on longer

(closer to the vehicle).

To deactivate the automatic function

rotate the light switch ring to position

The

warning light respectively

will flash on the instrument panel.

The direction indicators switch off

automatically when the steering wheel

is straightened or when the daytime

running lights (DRL)/parking lights are

activated.

Deactivation

Keep the left stalk in high beam

headlight flashing mode for a few

seconds.

Flashing the headlights

"Lane Change" function

To flash, the unstable position is

used (activate by pulling the lever (1)

fig. 33 towards you). With high beam

To indicate a change of lane with the

car moving, move the left lever to the

non-stable position for less than half a

second.

HIGH BEAM HEADLIGHTS

With ring in position

stalk forward toward the dashboard

(stable position). The warning light

, push the

headlights on, the warning light

the instrument panel will come on at

the same time.

The direction indicator on the side

selected will be activated for 5 flashes

and then go out automatically.

switches on in the instrument panel.

They are switched off by pulling the

stalk towards the steering wheel.

COURTESY LIGHTS

AHB (Automatic High Beam)

System

(where provided)

This function, with the ignition device in

MAR, allows activating the side lights

and the number plate lights for 25

seconds, whenever the car is unlocked

with the key with remote control.

Enabling the function can be adjusted

through the display Menu or the

Uconnect™system.

The system controls the automatic high

beam headlights providing increased

forward lighting at night by automating

high beam control using of a digital

camera mounted on the interior rear-

view mirror.

P2000262

The function is automatically disabled

once the activation time elapses (25

seconds), or when the car doors are

locked again, or by turning the ignition

device to a non-MAR position.

NOTES:

DIRECTION INDICATORS

Bring the left stalk (1) fig. 33 to the

(stable) position:

The Auto Dim High Beams control

can be turned on or off using the

Uconnect™ system. Refer to

the “Settings” paragraph in the

upwards: activates the right direction

the description in the "Reconfigurable

multifunction display" paragraph).

HEADLIGHT ALIGNMENT

ADJUSTMENT

Light beam direction

FOG LIGHTS ALIGNMENT

(where provided)

The correct aiming of the headlights is

important for the comfort and safety

of not only the driver but all other road

users.

Contact a Fiat Dealership to have the

headlights checked and adjusted.

ADJUSTING THE

HEADLIGHTS WHEN

ABROAD

This is also covered by a specific rule of

the highway code.

The headlights must be correctly

aligned to guarantee the best visibility

conditions for all drivers while travelling

with headlights on.

P2001052

Dipped beam headlights are adjusted

for driving in the country where the car

was originally purchased.

The display located on the instrument

panel provides a visual indication of the

adjusted position.

When travelling in countries with

opposite driving direction, to avoid

dazzling the drivers on the other side of

the road, you need to cover areas of

the headlight according to the Highway

code of the country you are travelling

in: (front right headlight), (front left

headlight).

Contact a Fiat Dealership to have the

headlights checked and adjusted.

Check light beam alignment every time

the load or its distribution changes.

Position 0: one or two people on the

front seats;

Position 1: 4 or 5 passengers;

Position 2: 4 or 5 passengers + load

in the luggage compartment;

Position 3: driver + maximum

permitted load stowed only in the boot.

Headlight alignment corrector

The headlight alignment corrector

operates with ignition device at MAR

and dipped headlights on.

Versions with bi-parabolic

headlights

To adjust, press buttons

fig. 34 on the control panel.

and

WARNING Check the headlight

alignment each time the weight of the

load transported changes.

fig. 35: mask for right driving, left

headlight;

fig. 36: mask for right driving, right

headlight.

INSTRUMENT PANEL

AND CONTROL BUTTON

GRAPHIC BRIGHTNESS

ADJUSTMENT

The brightness for the instrument panel

and control buttons can be adjusted

using the instrument panel Menu (see

GETTING TO KNOW YOUR CAR -> EXTERNAL LIGHTS for Your Fiat Tipo 4 Door Second Generation (2015-2026)

Related Topics

GETTING TO KNOW YOUR CAR

Popular Owner Manuals

Latest Owner Manuals