extending progressively towards the
edges.
HAZARD WARNING
LIGHTS
BULB
REPLACEMENT
CONTROL
141) 142) 143)
Press button fig. 146 to switch the
lights on/off.
55)
IMPORTANT
GENERAL
INSTRUCTIONS
When the hazard warning lights are on,
the warning lights
141) Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
142) Halogen bulbs contain pressurised
gas, in the case of breakage they may
burst causing glass fragments to be
projected outwards.
143) Only replace the light bulbs when the
engine is off and in a position that does
not interfere with traffic and lets you safely
replace them (see the description in the
"Replacement” paragraph). Also ensure
that the engine is cold, to prevent the risk
of burns.
and
flash.
Before replacing a bulb check the
contacts for oxidation;
replace blown bulbs with others of
the same type and power;
after replacing a headlight bulb,
always check its alignment;
when a light is not working, check
that the corresponding fuse is intact
before changing the bulb. For the
location of fuses, refer to the paragraph
"If a fuse blows" in this chapter.
146
P2000315
WARNING When the weather is
WARNING The use of hazard warning
lights is governed by the highway
code of the country you are driving in:
comply with legal requirements.
cold or damp or after heavy rain or
washing, the surface of headlights or
rear lights may steam up and/or form
drops of condensation on the inside.
This is a natural phenomenon due
to the difference in temperature and
humidity between the inside and the
outside of the glass which does not
indicate an anomaly fault and does not
compromise the normal operation of
lighting devices. The mist disappears
quickly when the lights are turned on,
starting from the centre of the diffuser,
WARNING
55) Halogen bulbs must be handled
holding the metallic part only. Touching
the transparent part of the bulb with your
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and let the bulb
dry.
Emergency braking
In the event of emergency braking
the hazard warning lights switch on
automatically as well as the warning
lights
panel.
and
in the instrument
The lights switch off automatically when
emergency braking ceases.
149
English 
