IGNITION KEY
EMERGENCY REMOVAL
63)
You can only remove the ignition key if
the gear lever is in the P (Park) position.
If the conventional battery of the car is
flat and the ignition key is engaged, the
latter is locked in position.
Follow these steps to extract the key
fob manually:
208
08106J0002EM
211
08106J0005EM
stop the car safely and engage the
parking brake;
using the key (1) fig. 210provided
(located in the container with the
handbook), undo the fixing screws (2)
fig. 211 of the lower trim (3);
insert the screwdriver supplied
perpendicularly in hole (2) fig. 209 and
adjust the release lever;
pull tab (4) fig. 212 downwards using
one hand and with the other one
remove the key, sliding it outwards;
once the key has been removed, refit
the lower trim (3) fig. 211, make sure
it locks correctly and fully tighten the
fixing screws (2).
209
08106J0003EM
move the gear lever to N (Neutral);
210
08106J0004EM
refit the gear lever panel and gear
lever gaiter correctly;
start the engine.
remove the lower steering column
trim (3) fig. 211 releasing it from its
housing;
174
English 
