Get Maintenance Guide for Ford Puma SUV 2019-2024

Fuses

Item

Fuse Rating

Protected Component

LPG safety valve.

Not used.

5 A

Rain sensor.

30 A

Windshield wiper motor.

Not used.

25 A

Heated rear window.

Not used.

20 A

Horn.

Not used.

25 A

Diesel fuel heater.

15 A

Rear window washer pump.

Cigar lighter.

20 A

Front auxiliary power points.

20 A

Rear auxiliary power points.

40 A

Low-speed cooling fan.

20 A

Rear window wiper.

Not used.

353

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Fuses

ACCESSING THE BODY CONTROL

BODY CONTROL MODULE

MODULE FUSE BOX - LHD

FUSE BOX

Open the glove compartment and

empty the contents.

LOCATING THE BODY CONTROL

MODULE FUSE BOX - LHD

2. Turn the retaining clips and remove

them.

The fuse box is behind the glove

3. Press the sides inward and swivel the

compartment.

glove compartment downward.

LOCATING THE BODY CONTROL

ACCESSING THE BODY CONTROL

MODULE FUSE BOX - RHD

The fuse box is below the glove

Carefully remove the cover below the

compartment.

glove compartment.

IDENTIFYING THE FUSES IN THE BODY CONTROL MODULE FUSE BOX

E299949

Item

Fuse Rating

Protected Component

Restraints control module.

5 A

In-vehicle temperature and humidity sensor.

10 A

Parking assist control module.

10 A

Ignition switch.

354

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Fuses

Item

Fuse Rating

Protected Component

Push button ignition switch.

Telematics modem.

Lock.

20 A

Unlock.

10 A

Moonroof.

30 A

Right-hand front power windows.

Passenger airbag deactivation indicator.

5 A

Auto-dimming interior mirror.

10 A

Not used.

Central security module.

5 A

Hands-free liftgate.

Power liftgate.

Child safety locks.

15 A

Fuel filler door.

30 A

Left-hand front power windows.

Heated steering wheel.

15 A

Headlamp control module.

Voice control.

15 A

Compact disc player.

Battery back-up sounder.

7.5 A

Wireless charging module.

10 A

Anti-theft alarm horn.

Climate control.

Steering wheel module.

7.5 A

Instrument cluster.

Data link connector.

20 A

Audio unit.

20 A

Not used.

355

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Fuses

IDENTIFYING FUSE TYPES

E267379

Micro 2.

Micro 3.

Maxi.

Mini.

M Case.

J Case.

J Case Low Profile.

Slotted M Case.

FUSES – TROUBLESHOOTING

FUSES – FREQUENTLY ASKED

QUESTIONS

When do I need to check a fuse?

If electrical components in the vehicle

are not working.

When do I need to replace a fuse?

If a fuse has blown.

How do I identify a blown fuse?

You can identify a blown fuse by a

broken wire within the fuse.

356

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

MAINTENANCE PRECAUTIONS

OPENING AND CLOSING THE

HOOD

Have your vehicle serviced regularly to help

maintain its roadworthiness and resale

Opening the Hood

value. There is a large network of

authorized dealers that are there to help

you with their professional servicing

expertise. We believe that their specially

trained technicians are best qualified to

service your vehicle properly and expertly.

They are supported by a wide range of

highly specialized tools developed

specifically for servicing your vehicle.

If your vehicle requires professional service,

an authorized dealer can provide the

necessary parts and service. Check your

warranty information to find out which

parts and services are covered.

E236610

Use only recommended fluids and service

Pull the hood release lever.

parts conforming to specifications. See

Capacities and Specifications (page

410).

If you do not use oil and fluid that meets

the defined specification and viscosity

grade, it could result in:

• Component damage not covered by

the vehicle Warranty.

• Longer engine cranking periods.

• Increased emission levels.

• Reduced engine performance.

• Reduced fuel economy.

• Reduced brake performance.

E189028

2. Slightly lift the hood. Move the lever

toward the center of your vehicle to

release the hood.

357

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

3. Open the hood and support it with the

hood strut.

Closing the Hood

Remove the strut from the catch and

secure it correctly in the clip.

2. Lower the hood and allow it to drop

under its own weight for the last

20–30 cm (8–12 in).

Note: Make sure that the hood is correctly

closed.

E87786

UNDER HOOD OVERVIEW - 1.0L ECOBOOST™, LHD

E307386

Engine coolant reservoir. See Checking the Coolant Level (page 366).

Engine oil dipstick. See Engine Oil Dipstick Overview (page 364).

Engine oil filler cap. See Checking the Engine Oil Level (page 364).

Brake fluid reservoir. See Checking the Brake Fluid (page 224).

Battery. See Changing the 12V Battery (page 371).

358

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

Engine compartment fuse box. See Under Hood Fuse Box (page 348).

Air filter assembly.

Windshield washer fluid reservoir. See Washers (page 94).

UNDER HOOD OVERVIEW - 1.0L ECOBOOST™, RHD

E307387

Engine coolant reservoir. See Checking the Coolant Level (page 366).

Brake fluid reservoir. See Checking the Brake Fluid (page 224).

Engine oil dipstick. See Engine Oil Dipstick Overview (page 364).

Engine oil filler cap. See Checking the Engine Oil Level (page 364).

Battery. See Changing the 12V Battery (page 371).

Engine compartment fuse box. See Under Hood Fuse Box (page 348).

Air filter assembly.

Windshield washer fluid reservoir. See Washers (page 94).

359

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

UNDER HOOD OVERVIEW - 1.5L ECOBLUE, LHD

E318596

Engine coolant reservoirs. See Checking the Coolant Level (page 366).

Engine oil filler cap. See Checking the Engine Oil Level (page 364).

Brake fluid reservoir. See Checking the Brake Fluid (page 224).

Battery. See Changing the 12V Battery (page 371).

Engine compartment fuse box. See Under Hood Fuse Box (page 348).

Air filter assembly.

Engine oil filler dipstick. See Engine Oil Dipstick Overview (page 364).

Windshield washer fluid reservoir. See Washers (page 94).

360

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

UNDER HOOD OVERVIEW - 1.5L ECOBLUE, RHD

H G

E318597

Engine coolant reservoirs. See Checking the Coolant Level (page 366).

Engine oil filler cap. See Checking the Engine Oil Level (page 364).

Battery. See Changing the 12V Battery (page 371).

Engine compartment fuse box. See Under Hood Fuse Box (page 348).

Air filter assembly.

Engine oil filler dipstick. See Engine Oil Dipstick Overview (page 364).

Brake fluid reservoir. See Checking the Brake Fluid (page 224).

Windshield washer fluid reservoir. See Washers (page 94).

361

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

UNDER HOOD OVERVIEW - 1.5L ECOBOOST™, LHD

E328392

Engine coolant reservoir. See Checking the Coolant Level (page 366).

Engine oil dipstick. See Engine Oil Dipstick Overview (page 364).

Engine oil filler cap. See Checking the Engine Oil Level (page 364).

Brake fluid reservoir. See Checking the Brake Fluid (page 224).

Battery. See Changing the 12V Battery (page 371).

Engine compartment fuse box. See Under Hood Fuse Box (page 348).

Air filter assembly.

Windshield washer fluid reservoir. See Washers (page 94).

362

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

UNDER HOOD OVERVIEW - 1.5L ECOBOOST™, RHD

E328393

Engine coolant reservoir. See Checking the Coolant Level (page 366).

Brake fluid reservoir. See Checking the Brake Fluid (page 224).

Engine oil dipstick. See Engine Oil Dipstick Overview (page 364).

Engine oil filler cap. See Checking the Engine Oil Level (page 364).

Battery. See Changing the 12V Battery (page 371).

Engine compartment fuse box. See Under Hood Fuse Box (page 348).

Air filter assembly.

Windshield washer fluid reservoir. See Washers (page 94).

363

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

ENGINE OIL DIPSTICK OVERVIEW

ENGINE OIL

- 1.5L ECOBOOST™

ENGINE OIL DIPSTICK OVERVIEW

- 1.0L ECOBOOST™

E264320

Minimum.

E141337

Maximum.

Minimum.

Maximum.

CHECKING THE ENGINE OIL LEVEL

Make sure that your vehicle is on level

ENGINE OIL DIPSTICK OVERVIEW

ground.

- 1.5L ECOBLUE

2. Check the oil level before starting the

engine, or switch the engine off after

warm up and wait 15 minutes for the

oil to drain into the oil pan.

Note: Checking the oil level too soon could

result in an inaccurate reading.

3. Remove the dipstick and wipe it with

a clean, lint-free cloth.

4. Reinstall the dipstick and make sure it

is fully seated.

E140423

5. Remove the dipstick again to check the

Minimum.

oil level.

Maximum.

Note: If the oil level is between the

maximum and minimum marks, the oil level

is acceptable. Do not add oil.

6. If the oil level is at the minimum mark,

immediately add oil.

7. Reinstall the dipstick. Make sure it is

fully seated.

Note: The oil consumption of new engines

reaches its normal level after approximately

5,000 km (3,000 mi).

364

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

Note: Increases in oil level can occur from

RESETTING THE INTELLIGENT OIL

frequent short trips that do not allow the

LIFE MONITOR - VEHICLES WITH:

engine to get to operating temperature, as

4.2 INCH INSTRUMENT CLUSTER

well as frequent idling or low speed driving

DISPLAY SCREEN

for long periods of time.

Only reset the oil life monitoring system

Note: If oil levels are continuously noted

after changing the engine oil and oil filter.

above the maximum mark, have your vehicle

checked as soon as possible.

Using the instrument cluster display

controls on the steering wheel, select

Settings.

ADDING ENGINE OIL

2. Select Information.

3. Select Oil life.

WARNING: Do not remove the filler

4. Press and hold the OK button until the

cap when the engine is running.

system reset confirmation appears.

WARNING: Do not add engine oil

RESETTING THE INTELLIGENT OIL

when the engine is hot. Failure to follow

LIFE MONITOR - VEHICLES WITH:

this instruction could result in personal

12.3 INCH INSTRUMENT CLUSTER

injury.

DISPLAY SCREEN

Do not use supplemental engine oil

Only reset the oil life monitoring system

additives because they are unnecessary

after changing the engine oil and oil filter.

and could lead to engine damage that the

vehicle warranty may not cover.

Press the menu button on the steering

wheel to enter the instrument cluster

Clean the area surrounding the engine

display main menu.

oil filler cap before you remove it.

2. Select Settings.

2. Remove the engine oil filler cap.

3. Select Oil life.

3. Add engine oil that meets our

specifications. See Capacities and

4. Press and hold the OK button until the

Specifications (page 410).

system reset confirmation appears.

4. Reinstall the engine oil filler cap. Turn

it clockwise until you feel a strong

ENGINE OIL CAPACITY AND

resistance.

SPECIFICATION

Note: Do not add oil further than the

For filling information, please refer to the

maximum mark. Oil levels above the

Capacities and Specifications section of

maximum mark may cause engine damage.

your owner's manual. See Capacities and

Note: Immediately soak up any oil spillage

Specifications (page 410).

with an absorbent cloth.

365

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

ENGINE COOLING FAN -

GASOLINE

WARNING: Do not put coolant in

the windshield washer reservoir. If

sprayed on the windshield, coolant could

make it difficult to see through the

WARNING: Keep your hands and

windshield.

clothing clear of the engine cooling fan.

WARNING: To reduce the risk of

Under certain conditions, the engine

personal injury, make sure the engine is

cooling fan may continue to run for several

cool before unscrewing the coolant

minutes after you switch your vehicle off.

pressure relief cap. The cooling system

is under pressure. Steam and hot liquid

can come out forcefully when you loosen

ENGINE COOLING FAN -

the cap slightly.

DIESEL

WARNING: Do not add coolant

further than the MAX mark.

WARNING: Keep your hands and

clothing clear of the engine cooling fan.

CHECKING THE COOLANT LEVEL

Under certain conditions, the engine

cooling fan may continue to run for several

WARNING: Do not remove the

minutes after you switch your vehicle off.

coolant reservoir cap when the engine is

This could happen in low ambient

on or the cooling system is hot. Wait 10

temperatures and independent of the

minutes for the cooling system to cool

engine coolant temperature, for example

down. Cover the coolant reservoir cap

short journeys or low coolant temperature.

with a thick cloth to prevent the

See What Is the Diesel Particulate Filter

possibility of scalding and slowly remove

(page 204).

the cap. Failure to follow this instruction

could result in personal injury.

COOLANT

WARNING: To reduce the risk of

personal injury, make sure the engine is

COOLANT PRECAUTIONS

cool before unscrewing the coolant

pressure relief cap. The cooling system

is under pressure. Steam and hot liquid

WARNING: Do not remove the

can come out forcefully when you loosen

coolant reservoir cap when the engine is

the cap slightly.

on or the cooling system is hot. Wait 10

minutes for the cooling system to cool

When the engine is cold, check the

down. Cover the coolant reservoir cap

concentration and level of the coolant at

with a thick cloth to prevent the

the intervals listed in the scheduled

possibility of scalding and slowly remove

maintenance information.

the cap. Failure to follow this instruction

could result in personal injury.

Note: Make sure that the coolant level is

between the MIN and the MAX marks on

the coolant reservoir.

366

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

$MaintenanceNote: Coolant expands when it is hot. Thelevel may extend beyond the MAX : Do not allow the fluidThis is touch your skin or eyes. If thisMaintain coolant concentration withinhappens, rinse the affected areas48% to 50%, which equates to a freezeimmediately with plenty of water andpoint between -34°C (-29°F) and -37°Ccontact your physician.(-35°F). Coolant concentration should bechecked using a refractometer. We do notWARNING: Undiluted coolant isrecommend the use of hydrometers orflammable and may ignite if spilled on acoolant test strips for measuring coolanthot : Do not use stop leak pellets, coolingsystem sealants, or non-specified additivesADDING COOLANTas they can cause damage to the enginecooling or heating systems. Resultingcomponent damage may not be covered byWARNING: Do not add enginethe vehicle when the engine is on or theNote: Automotive fluids are notcooling system is hot. Failure to instruction could result in is very important to use predilutedcoolant approved to the correctWARNING: Do not remove thespecification in order to avoid plugging thecoolant reservoir cap when the engine issmall passageways in the engine coolingon or the cooling system is hot. Wait 10system. See Capacities andminutes for the cooling system to coolSpecifications (page 410). Do not mixdown. Cover the coolant reservoir capdifferent colors or types of coolant in yourwith a thick cloth to prevent thevehicle. Mixing of engine coolants or usingpossibility of scalding and slowly removean incorrect coolant may harm the enginethe cap. Failure to follow this instructionor cooling system components and maycould result in personal be covered by the vehicle : If prediluted coolant is not available,WARNING: Do not put coolant inuse the approved concentrated coolantthe windshield washer reservoir. Ifdiluting it to 50/50 with deionised orsprayed on th$

Maintenance

Note: Coolant expands when it is hot. The

level may extend beyond the MAX mark.

WARNING: Do not allow the fluid

This is normal.

to touch your skin or eyes. If this

Maintain coolant concentration within

happens, rinse the affected areas

48% to 50%, which equates to a freeze

immediately with plenty of water and

point between -34°C (-29°F) and -37°C

contact your physician.

(-35°F). Coolant concentration should be

checked using a refractometer. We do not

WARNING: Undiluted coolant is

recommend the use of hydrometers or

flammable and may ignite if spilled on a

coolant test strips for measuring coolant

hot exhaust.

concentration.

Note: Do not use stop leak pellets, cooling

system sealants, or non-specified additives

ADDING COOLANT

as they can cause damage to the engine

cooling or heating systems. Resulting

component damage may not be covered by

WARNING: Do not add engine

the vehicle Warranty.

coolant when the engine is on or the

Note: Automotive fluids are not

cooling system is hot. Failure to follow

interchangeable.

this instruction could result in personal

injury.

It is very important to use prediluted

coolant approved to the correct

WARNING: Do not remove the

specification in order to avoid plugging the

coolant reservoir cap when the engine is

small passageways in the engine cooling

on or the cooling system is hot. Wait 10

system. See Capacities and

minutes for the cooling system to cool

Specifications (page 410). Do not mix

down. Cover the coolant reservoir cap

different colors or types of coolant in your

with a thick cloth to prevent the

vehicle. Mixing of engine coolants or using

possibility of scalding and slowly remove

an incorrect coolant may harm the engine

the cap. Failure to follow this instruction

or cooling system components and may

could result in personal injury.

not be covered by the vehicle Warranty.

Note: If prediluted coolant is not available,

WARNING: Do not put coolant in

use the approved concentrated coolant

the windshield washer reservoir. If

diluting it to 50/50 with deionised or

sprayed on the windshield, coolant could

distilled water. See Capacities and

make it difficult to see through the

Specifications (page 410). Using water that

windshield.

has not been deionised may contribute to

deposit formation, corrosion and plugging

WARNING: Do not dispose of

of the small cooling system passageways.

coolant in the household refuse or the

public sewage system. Use an authorized

Note: Coolants marketed for all makes and

waste disposal facility.

models may not be approved to our

specifications and may cause damage to

the cooling system. Resulting component

damage may not be covered by the vehicle

Warranty.

367

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

If the coolant level is at or below the

Do not add extra inhibitors or additives to

minimum mark, add prediluted coolant

the coolant. These can be harmful and

immediately.

compromise the corrosion protection of

the coolant.

To top up the coolant level do the

following:

CHANGING THE COOLANT

Unscrew the cap slowly. Any pressure

escapes as you unscrew the cap.

For coolant change, see your authorized

Add prediluted coolant approved to

dealer.

the correct specification. See

Changing the coolant is necessary at

Capacities and Specifications (page

specific mileage intervals listed in the

410).

scheduled maintenance information.

Add enough prediluted coolant to

reach the correct level.

MANAGING THE COOLANT

Replace the coolant reservoir cap. Turn

TEMPERATURE

the cap clockwise until it contacts the

hard stop.

If you tow a trailer with your vehicle, the

engine may temporarily reach a higher

Check the coolant level in the coolant

temperature during severe operating

reservoir the next few times you drive

conditions, for example ascending a long

your vehicle. If necessary, add enough

or steep grade in high ambient

prediluted engine coolant to bring the

temperatures.

coolant level to the correct level.

At this time, you may notice the coolant

If you have to add more than 1 L (1.1 qt) of

temperature gauge moves toward the red

engine coolant per month, have your

zone and a message may appear in the

vehicle checked as soon as possible.

information display.

Operating an engine with a low level of

coolant can result in engine overheating

and possible engine damage.

WARNING: To reduce the risk of

In case of emergency, you can add a large

crash and injury, be prepared that the

amount of water without engine coolant

vehicle speed may reduce and the

in order to reach a vehicle service location.

vehicle may not be able to accelerate

with full power until the coolant

Water alone, without engine coolant, can

temperature reduces.

cause engine damage from corrosion,

overheating or freezing.

WARNING: If you continue to drive

Do not use the following as a coolant

your vehicle when the engine is

substitute:

overheating, the engine could stop

without warning. Failure to follow this

• Alcohol.

instruction could result in the loss of

• Methanol.

control of your vehicle.

• Brine.

• Any coolant mixed with alcohol or

methanol antifreeze.

Alcohol and other liquids can cause engine

damage from overheating or freezing.

368

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

You may notice a reduction in vehicle

Stop your vehicle as soon as it is safe

speed caused by reduced engine power in

to do so. Fully apply the parking brake,

order to manage the engine coolant

shift into park (P) or neutral (N).

temperature. Your vehicle may enter this

Leave the engine running until the

mode if certain high-temperature and

coolant temperature gauge needle

high-load conditions take place. The

returns to the normal position. If the

amount of speed reduction depends on

temperature does not drop after

vehicle loading, grade and outside

several minutes, follow the remaining

temperature. If this occurs, there is no

steps.

need to stop your vehicle. You can

Switch the engine off and wait for it to

continue to drive. See Fail-Safe Cooling

cool. Check the coolant level.

(page 342).

If the coolant level is at or below the

The air conditioning may automatically

minimum mark, add prediluted coolant

turn on and off during severe operating

immediately.

conditions to protect the engine from

overheating. When the coolant

If the coolant level is normal, restart

temperature decreases to the normal

the engine and continue.

operating temperature, the air conditioning

turns on.

COOLANT – WARNING LAMPS

If the coolant temperature gauge moves

If the engine begins to overheat,

fully into the red zone, or if the coolant

E103308

the coolant temperature gauge

temperature warning or service engine

moves toward the red zone.

soon messages appear in your information

display, do the following:

A warning lamp illuminates and

E67028

a message may appear in the

information display.

COOLANT – INFORMATION MESSAGES

Message

Description and Action

High engine temperature Stop safely

Displays when the engine temperature is

too high. Stop your vehicle as soon as it is

safe to do so, switch the engine off and

allow it to cool. If the problem persists, have

your vehicle checked as soon as possible.

See Checking the Coolant Level (page

366).

369

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

12V BATTERY

WARNING: This vehicle may have

more than one battery. Removing the

12V BATTERY PRECAUTIONS

battery cables from only one battery

does not disconnect your vehicle

electrical system. Make sure you

WARNING: Batteries normally

disconnect the battery cables from all

produce explosive gases which can

batteries when disconnecting power.

cause personal injury. Therefore, do not

Failure to do so may cause serious

allow flames, sparks or lighted

personal injury or property damage.

substances to come near the battery.

When working near the battery, always

WARNING: For vehicles with

shield your face and protect your eyes.

Auto-Start-Stop the battery requirement

Always provide correct ventilation.

is different. You must replace the battery

with one of exactly the same

WARNING: When lifting a

specification.

plastic-cased battery, excessive pressure

on the end walls could cause acid to flow

through the vent caps, resulting in

WHAT IS THE BATTERY

personal injury and damage to the

MANAGEMENT SYSTEM

vehicle or battery. Lift the battery with a

battery carrier or with your hands on

The battery management system monitors

opposite corners.

battery conditions and takes actions to

extend battery life.

WARNING: Keep batteries out of

reach of children. Batteries contain

HOW DOES THE BATTERY

sulfuric acid. Avoid contact with skin,

MANAGEMENT SYSTEM WORK

eyes or clothing. Shield your eyes when

working near the battery to protect

If excessive battery drain is detected, the

against possible splashing of acid

system temporarily disables some

solution. In case of acid contact with skin

electrical systems to protect the battery.

or eyes, flush immediately with water for

Systems included are:

a minimum of 15 minutes and get prompt

medical attention. If acid is swallowed,

• Heated rear window.

call a physician immediately.

• Heated seats.

• Climate control.

WARNING: Battery posts,

terminals and related accessories

• Heated steering wheel.

contain lead and lead compounds,

• Audio unit.

chemicals known to the State of

• Navigation system.

California to cause cancer and

reproductive harm. Wash your hands

A message could appear in the information

after handling.

display to alert you that battery protection

actions are active. This message is only for

notification that an action is taking place,

and not intended to indicate an electrical

problem or that the battery requires

replacement.

370

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

BATTERY MANAGEMENT SYSTEM

For longer, trouble-free operation, keep the

LIMITATIONS

top of the battery clean and dry and the

battery cables tightly fastened to the

After battery replacement, or in some

battery terminals. If any corrosion is

cases after charging the battery with an

present on the battery or terminals, remove

external charger, the battery management

the cables from the terminals and clean

system requires eight hours of vehicle sleep

with a wire brush. You can neutralize the

time to relearn the battery state of charge.

acid with a solution of baking soda and

During this time, your vehicle must remain

water.

fully locked with the ignition switched off.

We recommend that you disconnect the

Note: Prior to relearning the battery state

negative battery cable terminal from the

of charge, the battery management system

battery if you plan to store your vehicle for

could temporarily disable some electrical

an extended period.

systems.

Note: If you only disconnect the negative

battery cable terminal, make sure it is

Electrical Accessory Installation

isolated or placed away from the battery

To make sure the battery management

terminal to avoid unintended connection or

system works correctly, do not connect an

arcing.

electrical device ground connection

If you disconnect or replace the battery

directly to the battery negative post. This

and your vehicle has an automatic

can cause inaccurate measurements of

transmission, it must relearn its adaptive

the battery condition and potential

strategy. Because of this, the transmission

incorrect system operation.

may shift firmly when first driven. This is

Note: If you add electrical accessories or

normal operation while the transmission

components to the vehicle, it could

fully updates its operation to optimum

adversely affect battery performance and

shift feel.

durability. This could also affect the

Removing the Battery

performance of other electrical systems in

the vehicle.

Apply the parking brake and switch the

ignition off.

CHANGING THE 12V BATTERY

2. Switch all electrical equipment off, for

example lights and radio.

The battery is in the engine compartment.

3. Wait a minimum of two minutes before

See Maintenance (page 357).

disconnecting the battery.

Your vehicle has a maintenance-free

Note: The engine management system has

battery. It does not require additional

a power hold function and remains powered

water during service.

for a period of time after you switch the

If the vehicle battery has a cover, make

ignition off. This is to allow diagnostic and

sure you correctly install it after cleaning

adaptive tables to be stored. Disconnecting

or replacing the battery.

the battery without waiting can cause

damage not covered by the vehicle

Warranty.

4. Disconnect and isolate the negative

battery cable terminal.

371

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

5. Disconnect and isolate the positive

Note: Complete Steps 2 and 3 within 10

battery cable terminal.

seconds.

6. Remove the battery securing clamp.

2. Flash the high beam headlamps five

times, ending with the high beams off.

7. Remove the battery.

3. Press and release the brake pedal three

If you disconnect or replace the vehicle

times.

battery, you must reset the following

features:

The battery warning lamp flashes three

times to confirm that the reset is

• Window bounce-back. See Window

successful.

Bounce-Back (page 109).

• Clock Settings.

RECYCLING AND DISPOSING OF

• Pre-set radio stations.

THE 12V BATTERY

Replacing the Battery

Make sure that you dispose of

E107998

old batteries in an

Note: Before reconnecting the battery,

environmentally friendly way.

make sure the ignition remains switched off.

Seek advice from your local authority

You must replace the battery with one of

about recycling old batteries.

exactly the same specification.

To install, reverse the removal procedure.

12V BATTERY –

Note: Make sure that you correctly install

TROUBLESHOOTING

the battery terminal covers, battery cover

and battery cable terminals.

12V BATTERY – WARNING LAMPS

RESETTING THE BATTERY

SENSOR

If it illuminates while driving, it

E67021

indicates a charging system

When you install a new battery, reset the

error. Switch off all unnecessary

battery sensor by doing the following:

electrical equipment and have your vehicle

immediately checked.

Switch the ignition on, and leave the

engine off.

372

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

12V BATTERY – INFORMATION MESSAGES

Message

Details

Check Charging system

The charging system needs servicing. If the warning stays on

or continues to come on, have your vehicle checked as soon

as possible.

Charging system Service The charging system needs servicing. If the warning stays on

soon

or continues to come on, have your vehicle checked as soon

as possible.

Charging system Service

The charging system needs servicing. Have your vehicle

now

immediately checked.

Battery state of charge

The battery management system determines that the 12V

low

battery is at a low state of charge. Start the engine to charge

the battery or charge the battery using an aftermarket battery

charger. Always use the vehicle ground point when connecting

the negative cable of the external battery charger. See Jump

Starting the Vehicle (page 338). This message clears once

you restart your vehicle and the battery state of charge has

recovered. Do not switch on the ignition when a battery

charger is in use to charge the battery.

Turn power off to save

The battery management system determines that the battery

battery

is at a low state of charge. Turn the ignition off as soon as

possible to protect the battery. This message will clear once

the vehicle has been started and the battery state of charge

has recovered. Turning off unnecessary electrical loads will

allow faster battery state-of-charge recovery.

Electrical power saver

Displayed when the battery management system detects an

active Some features

extended low-voltage condition. Various vehicle features will

turned off See manual

be disabled to help preserve the battery. Turn off as many of

the electrical loads as soon as possible to improve system

voltage. If the system voltage has recovered, the disabled

features will operate again as normal.

373

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

Replacement bulbs are specified in the

EXTERIOR BULBS

chart below. The correct bulbs do not

damage the lamp assembly or void the

EXTERIOR BULB SPECIFICATION

lamp assembly warranty and do provide

CHART

quality bulb illumination time.

Bulb

Specification

Power (Watts)

PY21W.

Front turn signal lamp.

LED.

Front turn signal lamp.

Daytime running lamp.

LED.

Headlamp low beam.

LED.

H1.

Headlamp high beam.

LED.

Headlamp high beam.

Front fog lamp.

LED.

Mirror turn signal lamp.

WY5W.

Rear lamp and stoplamp.

LED.

High mounted stoplamp.

LED.

Rear turn signal lamp.

PY21W.

Rear fog lamp.

P21W.

Reversing lamp.

W16W.

License plate lamp.

LED.

1 Projector Headlamp.

2 Reflector Headlamp.

Note: LED lamps are not serviceable. See an authorized dealer if they fail.

374

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

REMOVING A REAR LAMP

Note: You cannot fully remove the package

ASSEMBLY

tray support panel until you disconnect the

12V power outlet socket.

WARNING: Switch the lamps and

the ignition off. Failure to follow this

warning could result in serious personal

injury.

Stoplamp, Rear Lamp and Rear

Turn Signal Lamp

Fold the seat backrest forward. See

Rear Seats (page 149).

2. Remove the package tray.

E332966

4. Disconnect the 12V power outlet socket

by pressing the clip and fully remove

the package tray support panel.

E332967

5. Pull the side soft trim panel to access

the lamp release spring loaded

fastener.

6. Turn the spring loaded fastener

counterclockwise to release the lamp.

Note: You cannot fully remove the spring

loaded fastener.

E332964

3. Firmly pull the package tray support

panel at the four fixing points to unclip

the package tray support panel.

Note: Use a screwdriver to gently lift the

panel.

375

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance

E332970

E332968

7. Remove the lamp.

4. Remove the lamp.

8. Disconnect the electrical connector.

5. Disconnect the electrical connector.

9. To install, reverse the removal

6. To install, reverse the removal

procedure.

Reversing Lamp

CHANGING A REAR FOG LAMP

BULB

WARNING: Switch the lamps and

the ignition off. Failure to follow this

warning could result in serious personal

injury.

WARNING: Make sure the bulbs

have cooled down before removing

them. Failure to follow this warning could

result in serious personal injury.

E332969

1. Open the liftgate.

Use the correct specification bulb. See

Exterior Bulb Specification Chart (page

2. Carefully remove the cover.

374).

3. Turn the wing nut counterclockwise

Note: LED lamps are not serviceable. See

and remove it.

an authorized dealer if they fail.

Access the underside of your vehicle

behind the rear wheel.

376

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Maintenance for Your Ford Puma SUV 2019-2024

Related Topics

Popular Owner Manuals

Latest Owner Manuals