Maintenance
REMOVING A REAR LAMP
Note: You cannot fully remove the package
ASSEMBLY
tray support panel until you disconnect the
12V power outlet socket.
WARNING: Switch the lamps and
the ignition off. Failure to follow this
warning could result in serious personal
injury.
Stoplamp, Rear Lamp and Rear
Turn Signal Lamp
1.
Fold the seat backrest forward. See
Rear Seats (page 149).
2. Remove the package tray.
E332966
4. Disconnect the 12V power outlet socket
by pressing the clip and fully remove
the package tray support panel.
6
5
E332967
5. Pull the side soft trim panel to access
the lamp release spring loaded
fastener.
6. Turn the spring loaded fastener
counterclockwise to release the lamp.
Note: You cannot fully remove the spring
loaded fastener.
E332964
3. Firmly pull the package tray support
panel at the four fixing points to unclip
the package tray support panel.
Note: Use a screwdriver to gently lift the
panel.
375
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
English 
