2019-2024 Ford Puma SUV Maintenance -> Coolant User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance -> Coolant for Your Ford Puma SUV 2019-2024

MaintenanceUNDER HOOD OVERVIEW - 1.5L ECOBOOST™, LHDABCDEFHGE328392AEngine coolant reservoir. See Checking the Coolant Level (page 366).BEngine oil dipstick. See Engine Oil Dipstick Overview (page 364).CEngine oil filler cap. See Checking the Engine Oil Level (page 364).DBrake fluid reservoir. See Checking the Brake Fluid (page 224).EBattery. See Changing the 12V Battery (page 371).FEngine compartment fuse box. See Under Hood Fuse Box (page 348).GAir filter washer fluid reservoir. See Washers (page 94).362Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Maintenance
UNDER HOOD OVERVIEW - 1.5L ECOBOOST™, LHD
A
B
C
D
E
F
H
G
E328392
A
Engine coolant reservoir. See Checking the Coolant Level (page 366).
B
Engine oil dipstick. See Engine Oil Dipstick Overview (page 364).
C
Engine oil filler cap. See Checking the Engine Oil Level (page 364).
D
Brake fluid reservoir. See Checking the Brake Fluid (page 224).
E
Battery. See Changing the 12V Battery (page 371).
F
Engine compartment fuse box. See Under Hood Fuse Box (page 348).
G
Air filter assembly.
H
Windshield washer fluid reservoir. See Washers (page 94).
362
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MaintenanceUNDER HOOD OVERVIEW - 1.5L ECOBOOST™, RHDABCDEFHGE328393AEngine coolant reservoir. See Checking the Coolant Level (page 366).BBrake fluid reservoir. See Checking the Brake Fluid (page 224).CEngine oil dipstick. See Engine Oil Dipstick Overview (page 364).DEngine oil filler cap. See Checking the Engine Oil Level (page 364).EBattery. See Changing the 12V Battery (page 371).FEngine compartment fuse box. See Under Hood Fuse Box (page 348).GAir filter washer fluid reservoir. See Washers (page 94).363Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Maintenance
UNDER HOOD OVERVIEW - 1.5L ECOBOOST™, RHD
A
B
C
D
E
F
H
G
E328393
A
Engine coolant reservoir. See Checking the Coolant Level (page 366).
B
Brake fluid reservoir. See Checking the Brake Fluid (page 224).
C
Engine oil dipstick. See Engine Oil Dipstick Overview (page 364).
D
Engine oil filler cap. See Checking the Engine Oil Level (page 364).
E
Battery. See Changing the 12V Battery (page 371).
F
Engine compartment fuse box. See Under Hood Fuse Box (page 348).
G
Air filter assembly.
H
Windshield washer fluid reservoir. See Washers (page 94).
363
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MaintenanceENGINE OIL DIPSTICK OVERVIEWENGINE OIL- 1.5L ECOBOOST™ENGINE OIL DIPSTICK OVERVIEW- 1.0L ECOBOOST™ THE ENGINE OIL sure that your vehicle is on levelENGINE OIL DIPSTICK OVERVIEWground.- 1.5L ECOBLUE2. Check the oil level before starting theengine, or switch the engine off afterBAwarm up and wait 15 minutes for theoil to drain into the oil : Checking the oil level too soon couldresult in an inaccurate reading.3. Remove the dipstick and wipe it witha clean, lint-free cloth.4. Reinstall the dipstick and make sure itis fully seated.E1404235. Remove the dipstick again to check : If the oil level is between themaximum and minimum marks, the oil levelis acceptable. Do not add oil.6. If the oil level is at the minimum mark,immediately add oil.7. Reinstall the dipstick. Make sure it isfully : The oil consumption of new enginesreaches its normal level after approximately5,000 km (3,000 mi).364Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Maintenance
ENGINE OIL DIPSTICK OVERVIEW
ENGINE OIL
- 1.5L ECOBOOST™
ENGINE OIL DIPSTICK OVERVIEW
- 1.0L ECOBOOST™
A
B
A
B
E264320
A
Minimum.
E141337
B
Maximum.
A
Minimum.
B
Maximum.
CHECKING THE ENGINE OIL LEVEL
1.
Make sure that your vehicle is on level
ENGINE OIL DIPSTICK OVERVIEW
ground.
- 1.5L ECOBLUE
2. Check the oil level before starting the
engine, or switch the engine off after
B
A
warm up and wait 15 minutes for the
oil to drain into the oil pan.
Note: Checking the oil level too soon could
result in an inaccurate reading.
3. Remove the dipstick and wipe it with
a clean, lint-free cloth.
4. Reinstall the dipstick and make sure it
is fully seated.
E140423
5. Remove the dipstick again to check the
A
Minimum.
oil level.
B
Maximum.
Note: If the oil level is between the
maximum and minimum marks, the oil level
is acceptable. Do not add oil.
6. If the oil level is at the minimum mark,
immediately add oil.
7. Reinstall the dipstick. Make sure it is
fully seated.
Note: The oil consumption of new engines
reaches its normal level after approximately
5,000 km (3,000 mi).
364
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
MaintenanceNote: Increases in oil level can occur fromRESETTING THE INTELLIGENT OILfrequent short trips that do not allow theLIFE MONITOR - VEHICLES WITH:engine to get to operating temperature, as4.2 INCH INSTRUMENT CLUSTERwell as frequent idling or low speed drivingDISPLAY SCREENfor long periods of reset the oil life monitoring systemNote: If oil levels are continuously notedafter changing the engine oil and oil the maximum mark, have your vehiclechecked as soon as possible.1.Using the instrument cluster displaycontrols on the steering wheel, ENGINE OIL2. Select Information.3. Select Oil : Do not remove the filler4. Press and hold the OK button until thecap when the engine is reset confirmation : Do not add engine oilRESETTING THE INTELLIGENT OILwhen the engine is hot. Failure to followLIFE MONITOR - VEHICLES WITH:this instruction could result in personal12.3 INCH INSTRUMENT SCREENDo not use supplemental engine oilOnly reset the oil life monitoring systemadditives because they are unnecessaryafter changing the engine oil and oil could lead to engine damage that thevehicle warranty may not cover.1.Press the menu button on the steeringwheel to enter the instrument the area surrounding the enginedisplay main filler cap before you remove it.2. Select Settings.2. Remove the engine oil filler cap.3. Select Oil life.3. Add engine oil that meets ourspecifications. See Capacities and4. Press and hold the OK button until theSpecifications (page 410).system reset confirmation appears.4. Reinstall the engine oil filler cap. Turnit clockwise until you feel a strongENGINE OIL CAPACITY : Do not add oil further than theFor filling information, please refer to themaximum mark. Oil levels above theCapacities and Specifications section ofmaximum mark may cause engine owner's manual. See Capacities an
Maintenance
Note: Increases in oil level can occur from
RESETTING THE INTELLIGENT OIL
frequent short trips that do not allow the
LIFE MONITOR - VEHICLES WITH:
engine to get to operating temperature, as
4.2 INCH INSTRUMENT CLUSTER
well as frequent idling or low speed driving
DISPLAY SCREEN
for long periods of time.
Only reset the oil life monitoring system
Note: If oil levels are continuously noted
after changing the engine oil and oil filter.
above the maximum mark, have your vehicle
checked as soon as possible.
1.
Using the instrument cluster display
controls on the steering wheel, select
Settings.
ADDING ENGINE OIL
2. Select Information.
3. Select Oil life.
WARNING: Do not remove the filler
4. Press and hold the OK button until the
cap when the engine is running.
system reset confirmation appears.
WARNING: Do not add engine oil
RESETTING THE INTELLIGENT OIL
when the engine is hot. Failure to follow
LIFE MONITOR - VEHICLES WITH:
this instruction could result in personal
12.3 INCH INSTRUMENT CLUSTER
injury.
DISPLAY SCREEN
Do not use supplemental engine oil
Only reset the oil life monitoring system
additives because they are unnecessary
after changing the engine oil and oil filter.
and could lead to engine damage that the
vehicle warranty may not cover.
1.
Press the menu button on the steering
wheel to enter the instrument cluster
1.
Clean the area surrounding the engine
display main menu.
oil filler cap before you remove it.
2. Select Settings.
2. Remove the engine oil filler cap.
3. Select Oil life.
3. Add engine oil that meets our
specifications. See Capacities and
4. Press and hold the OK button until the
Specifications (page 410).
system reset confirmation appears.
4. Reinstall the engine oil filler cap. Turn
it clockwise until you feel a strong
ENGINE OIL CAPACITY AND
resistance.
SPECIFICATION
Note: Do not add oil further than the
For filling information, please refer to the
maximum mark. Oil levels above the
Capacities and Specifications section of
maximum mark may cause engine damage.
your owner's manual. See Capacities and
Note: Immediately soak up any oil spillage
Specifications (page 410).
with an absorbent cloth.
365
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Related Topics

Popular Owner Manuals