Get Safety system -> Installing a Child Restraint System (CRS) Guide for Hyundai Bayon SUV Second Generation (2021-2024)

Safety system

Installing a Child Restraint

System (CRS)

WARNING

Before installing your Child Restraint

System always:

Read and follow the instructions

provided by the manufacturer of the

Child Restraint System.

OIB034017

Failure to follow all warnings and

instructions could increase the risk

of the SERIOUS INJURY or DEATH if

an accident occurs.

Forward-facing Child Restraint

System

A forward-facing Child Restraint Sys-

tem provides restraint for the child’s

body with a harness. Keep children in a

forward-facing Child Restraint System

with a harness until they reach the top

height or weight limit allowed by your

Child Restraint System’s manufacturer.

Once your child outgrows the forward-

facing Child Restraint System, your

child is ready for a booster seat.

WARNING

If the vehicle head restraint prevents

proper installation of

a

Child

Restraint System, the head restraint

of the respective seating position

shall be readjusted or entirely

removed.

Booster seats

After selecting a proper Child Restraint

System and checking that the Child

Restraint System fits properly in the

rear of this vehicle, you are ready to

install the Child Restraint System

according to the manufacturer’s instruc-

tion. There are three general steps in

installing the Child Restraint Systems

properly:

A booster seat is Child Restraint Sys-

tem designed to improve the fit of the

vehicle’s seat belt system. A booster

seat positions the seat belt so that it fits

properly over the stronger parts of your

child’s body. Keep your children in

booster seats until they are big enough

to fit in a seat belt properly.

• Properly secure the Child Restraint

System to the vehicle. All Child

Restraint System must be secured to

the vehicle with the lap belt or lap part

of a lap/shoulder belt or with the ISO-

FIX top-tether and/or ISOFIX anchor-

age.

For a seat belt to fit properly, the lap

belt must lie comfortable across the

upper thighs, not the stomach. The

shoulder belt should lie comfortable

across the shoulder and chest and not

across the neck or face. Children under

age 13 must always be properly

restrained to minimise the risk of injury

in an accident, sudden stop or sudden

manoeuvre.

3-32

03

• Make sure the Child Restraint Sys-

tem is firmly secured. After install-

ing a Child Restraint System to the

vehicle, push and pull the seat for-

ward and from side-to-side to verify

that it is securely attached to the seat.

A Child Restraint System secured

with a seat belt should be installed as

firmly as possible. However, some

side-to- side movement can be

expected.

When installing a Child Restraint

System, adjust the vehicle seat (up

and down, forward and rearward) so

that your child fits in the Child

Restraint System in a comfortable

manner.

The ISOFIX system uses anchors in

the vehicle and attachments on the

Child Restraint System. The ISOFIX

system eliminates the need to use seat

belts to secure the Child Restraint Sys-

tem to the rear seats.

ISOFIX anchorages are metal bars built

into the vehicle. There are two lower

anchors for each ISOFIX seating posi-

tion that will accommodate a Child

Restraint System with lower attach-

ments.

To use the ISOFIX system in your vehi-

cle, you must have a Child Restraint

System with ISOFIX attachments. (An

ISOFIX Child Restraint System may

only be installed if it has vehicle-specif-

ic or universal approval in accordance

with the requirements of ECE-R44 or

ECE-R129.)

• Secure the child in the Child

Restraint System. Make sure the

child is properly strapped in the Child

Restraint System according to the

Child Restraint System manufactur-

er’s instructions.

The Child Restraint System manufac-

turer will provide you with instructions

on how to use the Child Restraint Sys-

tem with its attachments for the ISOFIX

anchorages.

CAUTION

A Child Restraint System in a closed

vehicle can become very hot. To pre-

vent burns, check the seating sur-

face and buckles before placing your

child in the Child Restraint System.

ISOFIX anchorage and top-tether

anchorage (ISOFIX anchorages

system) for children

The ISOFIX system holds a Child

Restraint System during driving and in

an accident. This system is designed to

make installation of the Child Restraint

System easier and reduce the possibil-

ity of improperly installing your Child

Restraint System.

OOSEV038012

ISOFIX anchorages have been provid-

ed in the left and right outboard rear

seating positions. Their locations are

shown in the illustration. There are no

ISOFIX anchorages provided for the

centre rear seating position.

3-3-33

Safety system

Type B

WARNING

Do not attempt to install a Child

Restraint System using ISOFIX

anchorages in the rear centre seat-

ing position. There are no ISOFIX

anchorages provided for this seat.

Using the outboard seat anchorag-

es, for the CRS installation on the

rear centre seating position, can

damage the anchorages.

OAC3030009TU

Type A

OAC3030010TU

OAC3039009TU

[A] : ISOFIX Anchorage Position Indicator,

[B] : ISOFIX Anchorage

The ISOFIX anchorages symbols are

located on the left and right rear seat

cushions to identify the position of the

ISOFIX anchorages in your vehicle

(see arrows in illustration). Both rear

outboard seats are equipped with a pair

of ISOFIX anchorages as well as a cor-

responding top-tether anchorage on

the back side of the rear seats.

OAC3039010TU

(Child Restraint Systems with universal

approval according to ECE-R44 or

ECE-R129 need to be fixed additionally

with a top-tether connected to the back

side of the rear seats.)

3-34

03

ISOFIX anchorages are located

between the seatback and the seat

cushion of the rear seat left and right

outboard seating positions.

WARNING

Take the following precautions when

using the ISOFIX system:

To use the ISOFIX anchorages, push

the upper portion of the ISOFIX anchor-

age cover.

• Read and follow all installation

instructions provided with your

Child Restraint System.

• To prevent the child from reaching

and taking hold of unretracted seat

belts, buckle all unused rear seat

belts and retract the seat belt web-

bing behind the child. Children can

be strangled if a shoulder belt

becomes wrapped around their

neck and the seat belt tightens.

Securing a Child Restraint

System with the “ISOFIX

Anchorage System”

To install a ISOFIX-compatible Child

Restraint System in either of the rear

outboard seating positions:

1. Move the seat belt buckle away from

the ISOFIX anchorages.

2. Move any other objects away from

the anchors that could prevent a

secure connection between the

Child Restraint System and the ISO-

FIX anchorages.

3. Place the Child Restraint System on

the vehicle seat, then attach the seat

to the ISOFIX anchorages according

to the instructions provided by the

Child Restraint System manufactur-

er.

• NEVER attach more than one Child

Restraint System to

a

single

anchorage. This could cause the

anchor or attachment to come

loose or break.

• Always have the ISOFIX system

inspected by your dealer after an

accident. An accident can damage

the ISOFIX system and may not

properly secure the Child Restraint

System.

4. Follow the instructions of the Child

Restraint System’s manufacturer for

proper installation and connection of

the ISOFIX attachments on the Child

Restraint System to the ISOFIX

anchorages.

3-3-35

Safety system

Securing a Child Restraint

System seat with “Top-tether

Anchorage” system

WARNING

Take the following precautions when

installing the top-tether:

• Read and follow all installation

instructions provided with your

Child Restraint System.

• NEVER attach more than one Child

Restraint System to a single ISOFIX

top-tether anchorage. This could

cause the anchorage or attachment

to come loose or break.

• Do not attach the top-tether to any-

thing other than the correct top-

tether anchorage. It may not work

properly if attached to something

else.

OAC3039011TU

Top-tether anchorages for Child

Restraint Systems are located on the

rear of the seatback.

• Child Restraint anchorages are

designed to withstand only those

loads imposed by correctly fitted

Child Restraint System.

Do not use them for adult seat

belts, harnesses, or for attaching

other items or equipment to the

vehicle.

OAC3039012TU

1. Route the Child Restraint System

seat strap over the seatback.

For vehicles with adjustable head

restraint, route the tether strap under

the head restraint and between the

head restraint posts, otherwise route

the tether strap over the top of the

seatback.

2. Connect the top-tether to the top-

tether anchorage, then tighten the

top-tether according to the instruc-

tions of your Child Restraint Sys-

tem’s manufacturer to firmly attach

the Child Restraint System to the

seat.

3-36

03

3-37

Safety system

Note ¹⁾: The universal belted CRS applies to all mass groups.

Note ²⁾: Seating position not suitable for child restraint system if the passenger’s front

airbag is activate.

Note ³⁾: To install a ISOFIX Child Restraint Systems :

- Driver Seat : You should move the seat at mid position and adjust the height of seat

to highest and head restraint stay angle to 9° position.

- Front Passenger Seat : You should move the seat at foremost and head restraint

stay angle to 9° position.

Note ⁴) : The seating position (number 5) is not suitable for fitment of child restraint sys-

tem with support leg.

h Do not use forward facing child restraint system when child’s weight is below 13 kg at

all seat.

h For semi-universal or vehicle specific CRS(ISOFIX or belted CRS), see the vehicle list

provided in the manual of CRS.

Seat

Number

1

Position

in the vehicle

Front right

2

3

Front centre

Front left

4

2^ndrow right

2^ndrow centre

2^ndrow left

5*

6

OOSEV038035R

* : 5 Seater, if equipped

* If the vehicle headrest prevents proper installation of a CRS, the headrest of the

seating position shall be readjusted or entirely removed.

Recommended Child Restraint Systems (for Europe)

Mass

group

ECE-R44/R129

Approval No.

Name

Manufacturer

Type of Fixation

Cabriofix &

Familyfix

Group 0+

Group I

Maxi Cosi

ISOFIX

E4 04443907

Duo Plus

Britax Römer

ISOFIX and top-tether

E1 04301133

E1 04301381

Forward-facing with ISOFIX

and vehicle belt

Group II KidFix III S Britax Römer

Forward-facing with vehicle E11 03.44.164

belt E11 03.44.165

Group III Junior III

Graco

CRS Manufacturer information

Maxi Cosi Cabriofix & Familyfix http://www.maxi-cosi.com

Britax Römmer http://www.britax.com

Graco http//www.gracobaby.com

3-38

03

Securing a Child Restraint

System with a lap/shoulder belt

WARNING

• Never place a Child Restraint Sys-

tem on the front passenger seat,

unless the passenger airbag is

deactivated.

When not using the ISOFIX system, all

Child Restraint Systems must be

secured to a rear seat with the lap part

of a lap/shoulder belt.

• For semi-universal or vehicle spe-

cific CRS (ISOFIX or belted CRS),

see the vehicle list provided in the

manual of CRS.

• It is recommended to remove the

head restraint, when CRS is unsta-

ble due to head restraint.

OHI038145

Installing a Child Restraint System

with a lap/shoulder belt

To install a Child Restraint System on

the rear seats, do the following:

1. Place the Child Restraint System on

a rear seat and route the lap/ shoul-

der belt around or through the

restraint, following the restraint man-

ufacturer’s instructions. Make sure

the seat belt webbing is not twisted.

Information

i

When using the rear centre seat belt,

you should also refer to the “Rear

Centre Seat Belt” in this chapter.

3-3-39

Safety system

OHI038146

OHI038183L

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the distinct

“click” sound.

3. Remove as much slack from the belt

as possible by pushing down on the

Child Restraint System whilst feed-

ing the shoulder belt back into the

retractor.

4. Push and pull on the Child Restraint

System to confirm that the seat belt

is holding it firmly in place.

Information

i

Position the release button so that it is

easy to access in case of an emergency.

If your CRS manufacturer instructs or

recommends you use a top-tether

anchorage with the lap/shoulder belt,

see page 3-36.

To remove the Child Restraint System,

press the release button on the buckle

and then pull the lap/shoulder belt out

of the restraint and allow the seat belt to

retract fully.

3-40

Safety system -> Installing a Child Restraint System (CRS) for Your Hyundai Bayon SUV Second Generation (2021-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals