2021-2024 Hyundai Bayon SUV Safety system -> Seat belt restraint system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety system -> Seat belt restraint system for Your Hyundai Bayon SUV Second Generation (2021-2024)

Safety system  
Whether or not a passenger is seated :  
Information  
i
If the seat belt is not fastened when the  
ignition switch is turned ON, the seat  
belt warning light will illuminate for  
about 70 seconds.  
If you start to drive without the seat belt  
fastened the corresponding warning  
light will continue to illuminate for about  
70 seconds regardless of vehicle  
speed.  
If you unfasten the seat belt when vehi-  
cle speed is below 12 mph (20 km/h),  
the corresponding warning light will illu-  
minate for about 70 seconds. If you  
unfasten the seat belt when vehicle  
speed is above 12 mph (20 km/h), the  
seat belt warning chime will sound for  
about 35 seconds and the correspond-  
ing warning light will blink.  
• Although the rear side passenger  
seat is not occupied, the seat belt  
warning light will blink or illuminate  
for 6 seconds.  
You can find the front passenger’s  
seat belt warning light on the centre  
fascia panel.  
• The rear side passenger’s seat belt  
warning may operate when luggage,  
laptop or other electronic device is  
placed on the rear side passenger  
seat.  
Seat belt restraint system  
Lap/shoulder belt  
If the rear door is opened whilst driving  
below 12 mph (20 km/h), the warning  
light and warning sound will not operate  
even if vehicle speed is above 12 mph  
(20 km/h).  
WARNING  
Riding in an improper position  
adversely affects the rear passen-  
ger’s seat belt warning system. It is  
important for the driver to instruct  
the passenger to be seated properly  
as instructed in this manual.  
OJS038068AU  
To fasten your seat belt:  
Pull it out of the retractor and insert the  
metal tab (1) into the buckle (2). There  
will be an audible “click” when the tab  
locks into the buckle.  
3-22  
03  
WARNING  
OJS038069AU  
You should place the lap belt (1) portion  
across your hips and the shoulder belt  
(2) portion across your chest.  
The seat belt automatically adjusts to  
the proper length after the lap belt por-  
tion is adjusted manually so that it fits  
snugly around your hips. If you lean for-  
ward in a slow, easy motion, the belt  
will extend and move with you.  
If there is a sudden stop or impact, the  
belt will lock into position. It will also  
lock if you try to lean forward too quick-  
ly.  
OTM038098R  
Improperly positioned seat belts  
may increase the risk of serious inju-  
ry in an accident. Take the following  
precautions when adjusting the seat  
belt:  
• Position the lap portion of the seat  
belt as low as possible across  
your hips, not on your waist, so  
that it fits snugly. This allows your  
strong pelvic bones to absorb the  
force of the crash, reducing the  
chance of internal injuries.  
• Position one arm under the shoul-  
der belt and the other over the belt,  
as shown in the illustration.  
NOTICE  
If you are not able to smoothly pull  
enough of the seat belt out from the  
retractor, firmly pull the seat belt out  
and release it. After release, you will  
be able to pull the belt out smoothly.  
• Always position the shoulder belt  
anchor into locked position at the  
appropriate height.  
• Never position the shoulder belt  
across your neck or face.  
3-3-23  

Related Topics

Popular Owner Manuals