Driving your vehicle -> Starting the engine for Your Hyundai I10 4 Door First Generation (2007-2012)

Driving your vehicle  
STARTING THE ENGINE  
E040000AUN-EU  
4. In extremely cold weather (below  
-18°C / 0°F) or after the vehicle has  
not been operated for several days, let  
the engine warm up without depress-  
ing the accelerator.  
(Continued)  
• Never reach for the ignition switch,  
or any other controls through the  
steering wheel while the vehicle is  
in motion. The presence of your  
hand or arm in this area could  
cause a loss of vehicle control, an  
accident and serious bodily injury  
or death.  
WARNING  
Always wear appropriate shoes  
when operating your vehicle.  
Unsuitable shoes (high heels, ski  
boots,etc.) may interfere with your  
ability to use the brake and acceler-  
ator pedal.  
Whether the engine is cold or warm, it  
should be started without depressing  
the accelerator.  
• Do not place any movable objects  
around the driver’s seat as they  
may move while driving, interfere  
with the driver and lead to an acci-  
dent.  
CAUTION  
If the engine stalls while you are in  
motion, do not attempt to move the  
shift lever to the P (Park) position. If  
traffic and road conditions permit,  
you may put the shift lever in the N  
(Neutral) position while the vehicle  
is still moving and turn the ignition  
switch to the START position in an  
attempt to restart the engine.  
E040100AUN  
1. Make sure the parking brake is  
applied.  
2. Manual Transaxle - Depress the  
clutch pedal fully and shift the  
transaxle into Neutral. Keep the clutch  
pedal and brake pedal depressed  
while turning the ignition switch to the  
start position.  
Automatic Transaxle - Place the  
transaxle shift lever in P (Park).  
Depress the brake pedal fully.  
CAUTION  
Do not engage the starter for more  
than 10 seconds. If the engine stalls  
or fails to start, wait 5 to 10 seconds  
before re-engaging the starter.  
Improper use of the starter may  
damage it.  
You can also start the engine when  
the shift lever is in the N (Neutral)  
position.  
3. Turn the ignition switch to START and  
hold it there until the engine starts (a  
maximum of 10 seconds), then  
release the key.  
5 5