Get Features of your vehicle -> Lighting Guide for Hyundai I10 4 Door First Generation (2007-2012)

Features of your vehicle

LIGHTING

D190100AUN

Battery saver function

(if equipped)

• The purpose of this feature is to pre-

vent the battery from being dis-

charged. The system automatically

turns off the exterior lights when the

driver removes the ignition key and

opens the driver-side door.

• With this feature, the parking lights will

be turned off automatically if the driver

parks on the side of road at night.

OPA041060

OPA041061

If necessary, to keep the lights on

when the ignition key is removed, per-

form the following:

D190400AUN

D190401AEN

Parking light position (

)

Lighting control

1) Open the driver-side door.

When the light switch is in the parking

light position, the tail, license and instru-

ment panel lights are ON.

The light switch has a Headlight and a

Parking light position.

2) Turn the parking lights OFF and ON

again using the light switch on the

steering column.

To operate the lights, turn the knob at the

end of the control lever to one of the fol-

lowing positions:

CAUTION

(1) OFF position

(2) Parking light position

(3) Headlight position

If the driver gets out of the vehicle

through other doors (except dri-

ver's door), the battery saver func-

tion does not operate. Therefore, It

causes the battery to be dis-

charged. In this case, make sure to

turn off the lamp before getting out

of the vehicle.

4 48

Features of your vehicle

OPA041062

OPA041063

OPA041064

D190402AEN

D190500AUN

To flash the headlights, pull the lever

towards you. It will return to the normal

(low beam) position when released. The

headlight switch does not need to be on

to use this flashing feature.

Headlight position (

)

High beam operation

When the light switch is in the headlight

position the head, tail, license and instru-

ment panel lights are ON.

To turn on the high beam headlights,

push the lever away from you. Pull it back

for low beams.

The high beam indicator will light when

the headlight high beams are switched

on.

✽

NOTICE

The ignition switch must be in the ON

position to turn on the headlights.

To prevent the battery from being dis-

charged, do not leave the lights on for a

prolonged time while the engine is not

running.

4 49

Features of your vehicle

To signal a lane change, move the turn

signal lever slightly and hold it in position

(B). The lever will return to the OFF posi-

tion when released.

If an indicator stays on and does not

flash or if it flashes abnormally, one of the

turn signal bulbs may be burned out and

will require replacement.

✽

NOTICE

If an indicator flash is abnormally quick

or slow, a bulb may be burned out or

have a poor electrical connection in the

circuit.

OPA041065

OPA047066

D190600AUN

D190700APA

Front fog light (if equipped)

Turn signals and lane change sig-

nals

Fog lights are used to provide improved

visibility when visibility is poor due to fog,

rain or snow, etc. The fog lights will turn

on when fog light switch is pressed after

the ignition switch is in the ON position

and the parklight is turned on.

The ignition switch must be on for the

turn signals to function. To turn on the

turn signals, move the lever up or down

(A). Green arrow indicators on the instru-

ment panel indicate which turn signal is

operating. They will self-cancel after a

turn is completed. If the indicator contin-

ues to flash after a turn, manually return

the lever to the OFF position.

To turn off the fog lights, press the switch

again.

CAUTION

When in operation, the fog lights

consume large amounts of vehicle

electrical power. Only use the fog

lights when visibility is poor.

4 50

Features of your vehicle

D190900AUN

Daytime running light

(if equipped)

Daytime Running Lights (DRL) can make

it easier for others to see the front of your

vehicle during the day. DRL can be help-

ful in many different driving conditions,

and it is especially helpful after dawn and

before sunset.

The DRL system will make the head-

lights turn OFF when:

1. The parklight switch is ON.

2. Engine stops.

OPA047067

OPA047068

D190800APA

D191001AEN

Rear fog light (if equipped)

Headlight leveling device

(if equipped)

To turn the rear fog lights on, turn the

headlight switch to the headlight on posi-

tion and press the rear fog light switch

(light on switch will illuminate).

To adjust the headlight beam level

according to the number of the passen-

gers and the loading weight in the lug-

gage area, turn the beam leveling switch.

The rear fog lights turn on when the rear

fog switch is pressed after the front fog

switch is turned to ON and the headlight

switch to the parklight position. (if

equipped)

The higher the number of the switch

position, the lower the headlight beam

level. Always keep the headlight beam at

the proper leveling position, or headlights

may dazzle other road users.

To turn the rear fog lights off, press the

rear fog light switch again or turn the

headlight switch to the OFF position.

When the rear fog light switch is pressed

and the driver’s door is opened, the

chime sounds.The chime stops when the

driver’s door is closed. (if equipped)

4 51

Features of your vehicle -> Lighting for Your Hyundai I10 4 Door First Generation (2007-2012)

Related Topics

Features of your vehicle

Popular Owner Manuals

Latest Owner Manuals