Get Convenient features -> Manual heating and air conditioning Guide for Hyundai I10 4 Door Third Generation (2020-2026)

Convenient features

3. Set the temperature control to the

desired position.

Manual heating and air condi-

tioning

4. Set the air intake control to fresh

mode.

The heating and cooling system can

be controlled manually by pushing

buttons other than the AUTO button.

In this case, the system works

sequentially according to the order of

buttons selected. When pressing any

EXWWRQꢀH[FHSWꢀWKHꢀ$872ꢀEXWWRQꢀZKLOVWꢀ

using automatic operation, the func-

tions not selected will be controlled

automatically.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn

the air conditioning system on.

7. Press the AUTO button in order to

convert to full automatic control of

the system.

1. Start the engine.

2. Set the mode to the desired posi-

tion.

To improve the effectiveness of

heating and cooling, select the

mode according to the following:

- Heating :

- Cooling :

Mode selection

OAC3059100R

5-64

Floor 'efrost (A, C, ')

Most of the air flow is directed to the

floor and the windscreen with a small

amount directed to the side window

defrosters.

OAI3059113I

The mode selection button controls

the direction of the air flow through

the ventilation system.

The air flow outlet direction is cycled

as follows:

OAI3059114I

'efrost-Level (A, ')

Most of the air flow is directed to the

windscreen with a small amount of air

directed to the side window defrost-

ers.

Face-Level (B, ')

Air flow is directed toward the upper

body and face. Additionally, each out-

let can be controlled to direct the air

discharged from the outlet.

Bi-Level (B, C, ')

Air flow is directed towards the face

and the floor.

OAC3059103R

Floor-Level (A, C, ')

Instrument panel vents

The instrument panel vent air flow

FDQꢀEHꢀGLUHFWHGꢀXSꢁGRZQꢀRUꢀOHIWꢁULJKWꢀ

XVLQJꢀWKHꢀYHQWꢀDGMXVWPHQWꢀOHYHUꢂ

Most of the air flow is directed to the

floor, with a small amount of the air

being directed to the windscreen and

side window defrosters.

7Rꢀ FORVHꢀ WKHꢀ YHQWꢀ DGMXVWPHQWꢀ OHYHUꢃꢀ

rotate it to the outer side till the end.

To open the vent, rotate it to the inner

side.

5-65

Convenient features

Temperature control

Air intake control

OAI3059111I

OAI3059106I

The temperature will increase by

turning the knob to the right.

This is used to select the outside

(fresh) air position or recirculated air

position.

The temperature will decrease by

turning the knob to the left.

To change the air intake control posi-

tion, push the control button.

The temperature will increase or

decrease by 0.5°C (1°F) for each

incremental location. When set to the

lowest temperature setting, the air

conditioning will operate continuously.

Recirculated air position

With the recirculated air

position selected, air

from the passenger

compartment will be

drawn through the heat-

ing system and heated

or cooled according to

the function selected.

7emperature conversion

If the battery has been discharged or

disconnected, the temperature mode

display will reset to Centigrade.

To change the temperature unit from

°C to °F or °F to °C :

2utside (fresh) air position

- Automatic climate control system

With the outside (fresh)

air position selected, air

enters the vehicle from

outside and is heated or

cooled according to the

function selected.

Press the AUTO button for 3 sec-

onds whilst pressing the OFF but-

ton.

- Instrument cluster

Go to User Settings o Other

Features o Temperature Unit.

The temperature unit on both the

cluster LCD display and the climate

control screen will change.

5-66

Fan speed control

Information

2perating the system primarily in

Fresh mode is recommended. 8se

Recirculation mode temporarily only

when needed.

Prolonged operation of the heater in

Recirculation mode and without the

A/C 21 can cause fogging of the wind-

screen.

In addition, prolonged use of the A/C

21 in Recirculation mode may result

in excessively dry, dehumidified air in

the cabin and may promote formation

of musty vent odor due to stagnant air.

OAI3059115I

Turn the knob to the right to increase

the fan speed and airflow. Turn the

knob to the left to decrease fan speed

and airflow.

WARNING

NOTICE

ꢀ &RQWLQXHGꢀ XVHꢀ RIꢀ WKHꢀ FOLPDWHꢀ

control system operation in

Recirculation mode for a pro-

longed period of time may cause

drowsiness to the occupants in

the cabin. This may lead to loss

of vehicle control which may

lead to an accident.

Operating the fan speed when the

ignition switch is in the ON posi-

tion could cause the battery to dis-

charge. Operate the fan speed

when the engine is running.

ꢀ &RQWLQXHGꢀ XVHꢀ RIꢀ WKHꢀ FOLPDWHꢀ

control system operation in

Recirculation mode with the A/C

2))ꢀ PD\ꢀ DOORZꢀ KXPLGLW\ꢀ WRꢀ

increase inside the cabin.

This may cause condensation to

accumulate on the windscreen

and obscure visibility.

ꢀ 'Rꢀ QRWꢀ VOHHSꢀ LQꢀ \RXUꢀ YHKLFOHꢀ RUꢀ

remain parked in your vehicle

with the windows up and either

the heater or the air conditioning

ON for prolonged periods of

time. Doing so may increase the

levels of carbon dioxide in the

cabin which may lead to serious

injury or death.

5-67

Convenient features -> Manual heating and air conditioning for Your Hyundai I10 4 Door Third Generation (2020-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals