Convenient features
If the window detects the resistance
whilst the power window switch is
pulled up continuously, the window
will stop upward movement then
ORZHUꢃDSSUR[LPDWHO\ꢃꢅꢋꢌꢃFPꢃꢀꢁꢃLQFKꢂꢋꢃ
To reset the power windows
If the power windows do not operate
normally, the automatic power win-
dow system must be reset as follows:
1. Place the ignition switch to the ON
position.
If the power window switch is pulled
up continuously again within 5 sec-
onds after the window is lowered by
the automatic window reverse fea-
ture, the automatic window reverse
will not operate.
2. Close the window and continue
pulling up on the power window
switch for at least one second.
If the power windows do not operate
properly after resetting, it is recom-
mended that the system be checked
by a HYUNDAI authorised repairer.
Information
i
7he automatic reverse feature is only
active when the “Auto 8p” feature is
used by fully pulling up the switch to
the second detent.
WARNING
The automatic reverse feature
doesn’t activate whilst resetting
power window system. Make sure
body parts or other objects are
safely out of the way before clos-
ing the windows to avoid injuries
or vehicle damage.
WARNING
Make sure body parts or other
objects are safely out of the way
before closing the windows to
avoid injuries or vehicle damage.
Automatic reverse (if equipped)
Objects less than 4 mm (0.16 inch)
in diameter caught between the
window glass and the upper win-
dow channel may not be detected
by the automatic reverse window
and the window will not stop and
reverse direction.
NOTICE
Do not install any accessories on
thewindows. Theautomaticreverse
feature may not operate.
OLF044032
If a window senses any obstacle
whilst it is closing automatically, it will
VWRSꢃDQGꢃORZHUꢃDSSUR[LPDWHO\ꢃꢉꢊꢃFPꢃ
ꢀꢁꢅꢃLQFKHVꢂꢃWRꢃDOORZꢃWKHꢃREMHFWꢃWRꢃEHꢃ
cleared.
5-28