Get Convenient features of your vehicle -> Light Guide for Hyundai I20 4 Door Second Generation (2015-2020)

%'ꢁꢂ)

Exterior lights

Lighting control

ꢀ

OLF044087R

OLF044086R

Parking light position (

)

Headlight position (

)

When the light switch is in the park-

ing light position, the parking (posi-

tion) light, license plate light and

instrument panel lights are turned

ON.

When the light switch is in the head

light position, the headlights, license

plate light and instrument panel lights

are turned ON.

OLF044084R

To operate the lights, turn the knob at

the end of the control lever to one of

the following positions:

(1) OFF position

i

Information

(2) AUTO light position (if equipped)

(3) Parking light position

(4) Headlight position

The ignition switch must be in the ON

position to turn on the headlights.

)'ꢀ

#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3

High beam operation

NOTICE

• Do not cover or spill anything on

the sensor (1) located on the

instrument panel.

• Do not clean the sensor using a win-

dow cleaner, the cleanser may

leave a light film which could inter-

fere with sensor operation.

• If your vehicle has window tint or

other types of metallic coating on

the front windshield, the AUTO

light system may not work proper-

ly.

OLF044085R

AUTO light position (if equipped)

OLF044192R

When the light switch is in the AUTO

position, the parking (position) light

and headlights will be turned ON or

OFF automatically depending on the

amount of light outside the vehicle.

To turn on the high beam headlamp,

push the lever away from you. The

lever will return to its original position.

The high beam indicator will light

when the headlamp high beams are

switched on.

Even with the AUTO light feature in

operation, it is recommended to

manually turn ON the lights when

driving at night or in a fog, or when

you enter dark areas, such as tun-

nels and parking facilities.

To turn off the high beam headlamp,

pull the lever towards you. The low

beams will turn on.

WARNING

Do not use high beam when there

are other vehicles approaching you.

Using high beam could obstruct the

other driver's vision.

)'ꢀꢁ

One-touch lane change function

(if equipped)

Turn signals and lane change sig-

nals

To activate an One-Touch Lane

Change function, move the turn sig-

nal lever slightly and then release it.

The lane change signals will blink 3,

5 or 7 times.

ꢀ

You can activate/deactivate the One

Touch Turn Signal function or choose

the number of blinking (3, 5, or 7)

from the User Settings Mode on the

LCD display.

OLF044088R

To flash the high beam headlights,

pull the lever towards you, then

release the lever. The high beams

will remain ON as long as you hold

the lever towards you.

For more details, refer to "LCD

Display" in this chapter.

OLF044091R

To signal a turn, push down on the

lever for a right turn or up for a left

turn in position (A). To signal a lane

change, move the turn signal lever

slightly and hold it in position (B).The

lever will return to the OFF position

when released or when the turn is

completed.

NOTICE

If the turn signal indicator stays on

and does not flash, or if it flashes

abnormally, a bulb may be burned

out or have a poor electrical connec-

tion in the circuit. The bulb may

require replacement.

If an indicator stays on and does not

flash or if it flashes abnormally, one of

the turn signal bulbs may be burned

out and will require replacement.

)'ꢀꢂ

#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3

Front fog light (if equipped)

Battery saver function

NOTICE

The purpose of this feature is to pre-

vent the battery from being dis-

charged. The system automatically

turns off the parking lights when the

driver removes the ignition key or

turns the engine off (for smart key)

and opens the driver-side door.

When in operation, the fog lights

consume large amounts of vehicle

electrical power. Only use the fog

lights when visibility is poor.

With this feature, the parking lights

will turn off automatically if the driver

parks on the side of road at night.

If necessary, to keep the lights on

when the ignition key is removed or

the engine is turned off (for smart

key), perform the following:

OIB047008R

Fog lights are used to provide

improved visibility when visibility is

poor due to fog, rain or snow, etc.

1) Open the driver-side door.

2) Turn the parking lights OFF and

ON again using the light switch on

the steering column.

1. Turn on the park light.

2. Move the light switch (1) to the

front fog light position.

3. To turn off the front fog light, turn

the light switch to the front fog light

position again or turn off the park-

ing light.

)'ꢀꢃ

Headlamp delay function

(if equipped)

Headlight leveling device

(if equipped)

NOTICE

If the driver gets out of the vehicle

through other doors (except driver's

door), the battery saver function

does not operate and the headlamp

delay function does not turn off auto-

matically. Therefore, It causes the

battery to be discharged. In this

case, make sure to turn off the lamp

before getting out of the vehicle.

If the key is removed from the ignition

switch or placed in the ACC or

LOCK/OFF position with the head-

lights ON, the headlights (and/or

parking lights) remain on for about 5

minutes. However, with the engine off

if the driver’s door is opened and

closed, the headlights (and/or parking

lights) are turned off after 15 seconds.

ꢀ

The headlights (and/or parking

lights) can be turned off by pressing

the lock button on the remote key (or

smart key) twice or turning the light

switch to the OFF or AUTO position.

However, if you turn the light switch

to the AUTO position when it is dark

outside, the headlights will not be

turned off.

OIB044009

To adjust the headlight beam level

according to the number of the pas-

sengers and loading weight in the

luggage area, turn the beam leveling

switch.

)'ꢀ)

#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3

The higher the number of the switch

position, the lower the headlight

beam level. Always keep the head-

light beam at the proper leveling

position, or headlights may dazzle

other road users.

Daytime running light (DRL)

(if equipped)

Interior lights

The Daytime Running Lights (DRL)

can make it easier for others to see

the front of your vehicle during the

day, especially after dawn and before

sunset.

WARNING

Do not use the interior lights when

driving in the dark. The interior

lights may obscure your view and

cause an accident.

Listed below are the examples of

proper switch settings. For loading

conditions other than those listed

below, adjust the switch position so

that the beam level may be the near-

est as the condition obtained accord-

ing to the list.

The DRL system will turn the dedi-

cated lamp OFF when:

1. The headlights or front fog lights

are in the ON position.

NOTICE

Do not use the interior lights for

extended periods when the engine is

turned off or the battery will dis-

charge.

2. The engine is turned off.

Loading condition

Driver only

Switch position

0

Driver + Front passenger

Interior lamp AUTO cut

Full passengers

(including driver)

1

2

3

The interior lamps will automatically

go off approximately 20 minutes after

the engine is turned off and the

doors closed. If a door is opened, the

lamp will go off 40 minutes after the

engine is turned off. If the doors are

locked by the remote key or smart

key and the vehicle enters the armed

stage of the theft alarm system, the

lamps will go off five seconds later.

Full passengers (including

driver) + Maximum permis-

sible loading

Driver + Maximum permis-

sible loading

)'ꢀꢄ

Front Room Lamp:

Front lamps

: With the Front Room Lamp in

this position, the front and

rear room lamps remain on

at all times.

The Front Room Lamp Switch acti-

vates the front and rear room lamps

when the switch is pressed in either of

the three positions indicated below:

: With the Front Room Lamp in

this position the front and

rear room lamps remain off

at all times.

: The front or rear room lamps

come on when the front or

rear doors are opened if the

engine is running or not.When

doors are unlocked by the

remote key or smart key, the

front and rear lamps come on

for approximately 15 seconds

as long as any door is not

opened. The front and rear

room lamps go out gradually

after approximately 15 sec-

onds if the door is closed.

However, if the ignition switch

is in the ON position or all

doors are locked, the front and

rear lamps will turn off imme-

diately. If a door is opened with

the ignition switch in the ACC

position or the LOCK/OFF

position, the front and rear

lamps stay on for about 20

minutes. However, if a door is

opened with the ignition switch

in the ON position, the lamps

stays on continuously.

ꢀ

i

Information

When the map lamp (1) is turned ON

by pressing the lens, the map lamp

will not turn off even if the front room

lamp switch is in the OFF position.

OIB044015

(1) Front Map Lamp

(2) Front Room Lamp

Front M ap Lamp:

Press either the right or left lens to

turn the map lamp on or off.This light

produces a spot beam for convenient

use as a map lamp at night or as a

personal lamp for the driver and the

front passenger.

)'ꢀꢅ

#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3

Room lamp

Luggage room lamp (if equipped)

OIB044016

OIB047017

Rear Door Lamp Switch:

The luggage room lamp comes on

when the tailgate is opened.

Press this switch to turn the room

lamp on and off.

NOTICE

The luggage room lamp comes on

as long as the tailgate is open. To

prevent unnecessary charging sys-

tem drain, close the tailgate securely

after using the luggage room.

Do not leave the lamp switches on for

an extended period of time when the

engine is turned off.

)'ꢀꢀ

Convenient features of your vehicle -> Light for Your Hyundai I20 4 Door Second Generation (2015-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals