Get Convenient features of your vehicle -> Windows Guide for Hyundai I20 4 Door Second Generation (2015-2020)

#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3

ꢀ'# &ꢀ(ꢁ

Power windows (if equipped)

(1) Driver’s door power window

switch

(2) Front passenger’s door power

window switch

(3) Rear door power window switch

(Right)*

(4) Rear door power window switch

(Left)*

(5) Window opening and closing

(6) Automatic power window*

(7) Power window lock switch

* : if equipped

OIB044048

)'ꢀꢁ

The ignition switch must be in the ON

position to be able to raise or lower

the windows. Each door has a Power

Window switch to control that door's

window. The driver has a Power

Window Lock switch which can block

the operation of passenger windows.

The power windows will operate for

approximately 30 seconds after the

ignition switch is placed in the ACC

or LOCK/OFF position. However, if

the front doors are opened, the

Power Windows cannot be operated

even within the 30 second period.

Window opening and closing

i

Information

• In cold and wet climates, power win-

dows may not work properly due to

freezing conditions.

• While driving with the rear windows

down, your vehicle may demonstrate

a wind buffeting or pulsation noise.

This noise is normal and can be

reduced or eliminated by taking the

following actions. If the noise occurs

with one or both of the rear windows

down, partially lower both front win-

dowsapproximately 2.5 cm (1 inch).

ꢂ

OLF044031

To open or close a window, press

down or pull up the front portion of

the corresponding switch to the first

detent position (5).

)'ꢀ

#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3

Auto up/down window

(if equipped)

To reset the power windows

Automatic reverse (if equipped)

If the power windows do not operate

normally, the automatic power win-

dow system must be reset as follows:

Pressing or pulling up the power win-

dow switch momentarily to the sec-

ond detent position (6) completely

lowers or lifts the window even when

the switch is released. To stop the

window at the desired position while

the window is in operation, pull up or

press down and release the switch.

1. Place the ignition switch to the ON

position.

2. Close the window and continue

pulling up on the power window

switch for at least 1 second.

If the power windows do not operate

properly after resetting, it is recom-

mended that the system be checked

by an authorized HYUNDAI dealer.

OIB024001

If a window senses any obstacle while

it is closing automatically, it will stop

and lower approximately 30 cm (12

in.) to allow the object to be cleared.

WARNING

The automatic reverse feature

doesn't activate while resetting

power window system. Make sure

body parts or other objects are

safely out of the way before clos-

ing the windows to avoid injuries

or vehicle damage.

If the window detects the resistance

while the power window switch is

pulled up continuously, the window

will stop upward movement then

lower approximately 2.5 cm (1 in.).

If the power window switch is pulled

up continuously again within 5 sec-

onds after the window is lowered by

the automatic window reverse fea-

ture, the automatic window reverse

will not operate.

)'ꢀꢀ

Power window lock switch

(if equipped)

NOTICE

i

Information

• To prevent possible damage to the

power window system, do not

open or close two windows or

more at the same time. This will

also ensure the longevity of the

fuse.

The automatic reverse feature is only

active when the “auto up” feature is

used by fully pulling up the switch to

the second detent.

WARNING

ꢂ

• Never try to operate the main

switch on the driver's door and the

individual door window switch in

opposite directions at the same

time. If this is done, the window will

stop and cannot be opened or

closed.

Make sure heads, other body

parts or other objects are safely

out of the way before closing the

windows to avoid injuries or vehi-

cle damage. Objects less than 4

mm (0.16 in.) in diameter caught

between the window glass and the

upper window channel may not be

detected by the automatic reverse

window and the window will not

stop and reverse direction.

OIB044049

The driver can disable the power

window switches on the rear passen-

gers' doors by pressing the power

window lock switch.

When the power window lock switch

is pressed:

• The driver's master control can

operate all the power windows.

NOTICE

• The front passenger's control can

operate the front passenger's

power window.

Do not install any accessories on the

windows. The automatic reverse fea-

ture may not operate.

• The rear passenger's control can-

not operate the rear passengers'

power window.

)'ꢀꢂ

#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3

(Continued)

WARNING

• Do not allow children to play with

the power windows. Keep the dri-

ver’s door power window lock

switch in the LOCK position

(pressed). Serious injury can

result from unintentional window

operation by the child.

• NEVER leave the keys in your

vehicle with unsupervised chil-

dren, when the engine is run-

ning.

• NEVER leave any child unat-

tended in the vehicle. Even very

young children may inadvertent-

ly cause the vehicle to move,

entangle themselves in the win-

dows, or otherwise injure them-

selves or others.

• Do not extend your head, arms

or body outside the windows

while driving.

• Always double check to make

sure all arms, hands, head and

other obstructions are safely out

of the way before closing a win-

dow.

(Continued)

)'ꢀꢃ

Convenient features of your vehicle -> Windows for Your Hyundai I20 4 Door Second Generation (2015-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals