Get Maintenance Guide for Hyundai I20 4 Door Second Generation (2015-2020)

ꢁꢂꢃꢄꢅꢆꢄꢂꢄꢇꢆ

ꢀ4ꢁ043*-ꢂꢃꢄ2"/ꢃ34/ ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.+

,204/3424-3* 3"ꢆ0-3 ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.(

ꢀꢁ8:4ꢂ.94:.)08.7%7376ꢃ******************************************************1/&

ꢀꢁ8:49,5786:8582:9)4:25(6708.99********************************1/&

ꢄ8-78:920,)546,:869)4:25(6708.9ꢅꢆ7:.:39:8-78:ꢇ****1/ꢈ

ꢇ43"*ꢃ204/3424-3ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.'

ꢀꢁ8:49,5786:8582:9.2+:'(3:9 **************************************1/

ꢈ-ꢉ3ꢊꢋ!3ꢊ*ꢃ204/3424-3* 3"ꢆ0-3 ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.&ꢌ

ꢉ04,539,5786:8582:9.2+:'(3:9/9ꢊ:64039:8-78: ******1/ꢋꢋ

ꢌ5786:8582:9(8':49.:ꢍ:4:9(.5-:9208'76708.9

ꢏ"2ꢐ3ꢑ-!ꢋ/-ꢉ*ꢎ!ꢋ0ꢊꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.+(

ꢏ+:2!78-96+:9%45!:ꢒ23(62+9"3(7'93:ꢍ:3************************1/$&

ꢒ2"ꢐ04ꢁ*ꢓ"2ꢐ3 ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.+$

ꢏ+:2!78-96+:9)54!78-9%45!: *****************************************1/$ꢈ

ꢔ2 ꢉ3"*ꢎ!ꢋ0ꢊ ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.+$

ꢏ+:2!78-96+:9ꢁ5.+:49"3(7'93:ꢍ:399 *******************************1/$ꢈ

ꢕꢋ3!*ꢕ0!/3"*ꢖꢕꢂ"*ꢗ03 3!ꢘꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.+'

ꢆ457878-9ꢁ56:49"40,9"(:39"736:4************************************1/$

ꢄꢓ6452678-95749"40,96+:9"(:39"736:4 ******************************1/$

ꢙ0"*-!3243" ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.+1

/9ꢊ:64039:8-78: *************************************************************1/ꢋ&

ꢉ04,539,5786:8582:9.2+:'(3:9/9ꢆ7:.:39:8-78:*******1/ꢋꢈ

ꢌ5786:8582:9(8':49.:ꢍ:4:9(.5-:9208'76708.9

ꢔ736:494:)352:,:8699 ********************************************************1/$1

ꢚ!0ꢃ2/3*-ꢂ4/"ꢂ!*20"*ꢎ0!/3" ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.)ꢌ

ꢔ736:4978.):26708***************************************************************1/#ꢐ

ꢔ736:494:)352:,:86***********************************************************1/#ꢐ

/9ꢆ7:.:39:8-78: *************************************************************1/ꢎꢎ

ꢀꢍꢄ!242/0ꢂ4*ꢂꢎ* -ꢉ3ꢊꢋ!3ꢊ*ꢃ204/3424-3*0/3ꢃ ꢅ1.%)

ꢀ4ꢁ043*ꢂ0! ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.%'

ꢏ+:2!78-96+:9:8-78:907393:ꢍ:39ꢅꢊ:64039:8-7:8:ꢇ********1/ꢎ

ꢏ+:2!78-96+:9:8-78:907393:ꢍ:39ꢅꢆ7:.:39:8-78:ꢇ**********1/ꢎ1

ꢏ+58-78-96+:9:8-78:9073958'9"736:4******************************1/$ꢐ

ꢀ4ꢁ043*-ꢂꢂ!24/ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.+&

ꢏ+:2!78-96+:9200358693:ꢍ:3 *******************************************1/$ꢋ

ꢑ:20,,:8':'9:8-78:92003586*************************************1/$$

ꢏ+58-78-96+:92003586*****************************************************1/$#

ꢔ0ꢄ3"*ꢓ!2ꢊ3 ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.)%

ꢕ35':978.):26708 **************************************************************1/#ꢎ

ꢕ35':94:)352:,:86 **********************************************************1/#ꢎ

ꢏ2//3"ꢛꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.)(

ꢔ049%:.69%566:4ꢃ9.:4ꢍ72:************************************************1/#&

ꢕ566:4ꢃ925)5276ꢃ935%:39***************************************************1/#ꢈ

ꢕ566:4ꢃ94:2+54-78- *********************************************************1/#ꢈ

ꢑ:.:6976:,. ***********************************************************************1/#

ꢕ566:4ꢃ94:)352:,:86*******************************************************1/#

ꢀ

ꢜ0"3 *24ꢊ*ꢇꢉ33! ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.)1

ꢖ74:9254:****************************************************************************1/#1

ꢑ:20,,:8':'9203'9674:978"3567089)4:..(4:.*************1/#1

ꢏ+:2!78-9674:978"3567089)4:..(4:**********************************1/&ꢋ

ꢖ74:940656708 *********************************************************************1/&ꢎ

ꢗ+::39537-8,:86958'9674:9%53582:******************************1/&$

ꢖ74:94:)352:,:86 *************************************************************1/&$

ꢗ+::394:)352:,:86*********************************************************1/&&

ꢖ74:964526708**********************************************************************1/&&

ꢖ74:9,5786:8582:9 ***********************************************************1/&&

ꢖ74:9.7':ꢁ533935%:378-******************************************************1/&&

ꢘ0ꢁ95.):269456709674:******************************************************1/&1

ꢙꢄꢄ32"24-3*-2"3ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.'(

ꢄꢓ6:47049254: ********************************************************************1/ &

86:47049254:**********************************************************************1/1ꢐ

ꢀꢃ0 0ꢂ4*-ꢂ4/"ꢂ!* ꢛ /3ꢃꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.1+

ꢏ458!25.:9:,7..708920864039.ꢃ.6:,***************************1/1$

ꢄꢍ5)04567ꢍ:9:,7..708920864039.ꢃ.6:,*************************1/1$

ꢄꢓ+5(.69:,7..708920864039.ꢃ.6:, *******************************1/1#

ꢕꢋ 3 ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.#&

8.64(,:869)58:39"(.:94:)352:,:86 ***************************1/ꢙꢎ

ꢄ8-78:920,)546,:869)58:39"(.:94:)352:,:86*********1/ꢙ#

ꢔ(.:ꢒ4:35ꢃ9)58:39':.247)6708 ***************************************1/ꢙ#

ꢝ0ꢁꢉ/*ꢓꢋ!ꢓ ꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅꢅ1.$#

ꢚ:5'37-+6ꢛ9ꢊ54!78-9ꢅꢊ0.76708ꢇ9ꢘ7-+6ꢛ9ꢖ(489.7-8539ꢘ7-+6ꢛ9

ꢘ0ꢁ9ꢕ:5,9ꢜ..7.6/ꢝ656729ꢘ7-+6ꢛ9ꢔ0-9ꢘ7-+69

58'9ꢆ5ꢃ67,:9ꢑ(8878-9ꢘ7-+69%(3%94:)352:,:86******1/ꢈꢈ

ꢝ7':94:):56:4937-+69ꢅꢘꢄꢆꢇ94:)352:,:86 **********************1/ ꢋ

ꢑ:54920,%7856708937-+69%(3%94:)352:,:86*****************1/ ꢎ

ꢚ7-+9,0(86:'9.60)937-+6************************************************1/ $

ꢘ72:8.:9)356:937-+69%(3%94:)352:,:869************************1/ $

86:4704937-+69%(3%94:)352:,:86************************************1/ #

$"ꢈ!"$#ꢉꢊꢁꢋ ꢌꢍꢁ$"ꢍ#

■ Petrol Engine (Kappa 1.2 MPI)

1. Engine coolant reservoir

2. Radiator cap

3. Brake/clutch fluid reservoir

4. Air cleaner

5. Engine oil dipstick

6. Engine oil filler cap

7. Windshield washer fluid reservoir

8. Engine room junction block

9. Battery

* : if equipped

The actual engine room in the vehicle may differ from the illustration.

OIB074056

1.+

,204/3424-3

■ Diesel Engine (U II 1.4 TCI)

1. Engine coolant reservoir

2. Radiator cap

3. Brake/clutch fluid reservoir

4. Air cleaner

5. Engine oil dipstick

6. Engine oil filler cap

7. Windshield washer fluid reservoir

8. Engine room junction block

9. Battery

The actual engine room in the vehicle may differ from the illustration.

OIB074001

1.)

ꢁ !"ꢍ$" "ꢉ$#ꢎ$ꢌꢏ!ꢉ$ꢎ

You should exercise the utmost care

to prevent damage to your vehicle

and injury to yourself whenever per-

forming any maintenance or inspec-

tion procedures. Inadequate, incom-

plete or insufficient servicing may

result in operational problems with

your vehicle that could lead to vehi-

cle damage, an accident, or person-

al injury.

Owner's responsibility

Owner maintenance precautions

i

Information

Improper or incomplete service may

result in problems.This chapter gives

instructions only for the maintenance

items that are easy to perform.

Maintenance Service and Record

Retention are the owner's responsibil-

ity.

i

Information

We recommend in general that you

have your vehicle serviced by an Improper owner maintenance during

authorized HYUNDAI dealer.

the warranty period may affect war-

ranty coverage. For details, read the

separate Service Passport provided

with the vehicle. If you're unsure

about any servicing or maintenance

procedure, we recommend that the

system be serviced by an authorized

HYUNDAI dealer.

You should retain documents that

show proper maintenance has been

performed on your vehicle in accor-

dance with the scheduled mainte-

nance service charts shown on the

following pages. You need this infor-

mation to establish your compliance

with the servicing and maintenance

requirements of your vehicle war-

ranties.

Detailed warranty information is pro-

vided in your Service Passport.

Repairs and adjustments required as

a result of improper maintenance or

a lack of required maintenance are

not covered when your vehicle is

covered by warranty.

1.(

,204/3424-3

NOTICE

(Continued)

WARNING

Therefore, if you must run the

engine while working under the

hood, make certain that you

remove all jewelry (especially

rings, bracelets, watches, and

necklaces) and all neckties,

scarves, and similar loose cloth-

ing before getting near the

engine or cooling fans.

• Do not put heavy objects or apply

excessive force on top of the

engine cover (if equipped) or fuel

related parts.

• When you inspect the fuel system

(fuel lines and fuel injection

devices), we recommend that you

contact an authorized HYUNDAI

dealer.

Maintenance work

• Performing maintenance work

on a vehicle can be dangerous.

You can be seriously injured

while performing some mainte-

nance procedures. If you lack

sufficient knowledge and experi-

ence or the proper tools and

equipment to do the work, we

recommend that the system be

serviced by an authorized

HYUNDAI dealer.

• Working under the hood with the

engine running is dangerous. It

becomes even more dangerous

when you wear jewelry or loose

clothing. These can become

entangled in moving parts and

result in injury.

• Do not drive long time with the

engine

removed.

cover(if

equipped)

WARNING

• When checking the engine room,

do not go near fire. Fuel, washer

fluid, etc. are flammable oils that

may cause fire.

• Before touching the battery, igni-

tion cables and electrical wiring,

you should disconnect the battery

"-" terminal. You may get an elec-

tric shock from the electric current.

Do not leave gloves, rags or any

other combustible material in the

engine compartment. Doing so

may cause a heat-induced fire.

(Continued)

1.#

(Continued)

Engine compartment precautions

(Diesel engine)

WARNING

• When you remove the interior trim

cover with a flat head (-) driver, be

careful not to damage the cover.

• Be careful when you replace and

clean bulbs to avoid burns or elec-

trical shock.

• The injector operates at high volt-

age (maximum 200v). Therefore,

the following accidents may occur.

Diesel Engine

Never work on injection system

with engine running or within 30

seconds after shutting off engine.

High-pressure pump, rail, injectors

and high-pressure pipes are sub-

ject to high pressure even after

the engine stopped. The fuel jet

produced by fuel leaks may cause

serious injury, if it touches the

body. People using pacemakers

should not move more than 30cm

closer to the ECU or wiring har-

ness within the engine room while

engine is running, since the high

currents in the electronic engine

control system produce consider-

able magnetic fields.

- Direct contact with the injector or

injector wiring may cause electric

shock or damage your muscle or

nerve system.

- The electromagnetic wave from

the operating injector may cause

the artificial heart pacemaker to

malfunction.

• Follow the safety tips provided

below, when you are checking the

engine room while the engine is

running.

- Do not touch the injector, injector

wirings, and the engine computer

while the engine is running.

- Do not remove the injector con-

nector while the engine is run-

ning.

- People using pacemakers must

not go near the engine while the

engine is starting or running.

1.$

,204/3424-3

ꢊꢐ"$ꢌ#ꢁ !"ꢍ$" "ꢉ$#

The following lists are vehicle checks

and inspections that should be per-

formed at the frequencies indicated

to help ensure safe, dependable

operation of your vehicle.

While operating your vehicle:

Owner maintenance schedule

• Note any changes in the sound of

the exhaust or any smell of

exhaust fumes in the vehicle.

• Check for vibrations in the steering

wheel. Notice any increased steer-

ing effort or looseness in the steer-

ing wheel, or change in its straight-

ahead position.

• Notice if your vehicle constantly

turns slightly or "pulls" to one side

when traveling on smooth, level

road.

• When stopping, listen and check

for unusual sounds, pulling to one

side, increased brake pedal travel

or "hard-to-push" brake pedal.

When you stop for fuel:

• Check the engine oil level.

• Check the coolant level in coolant

reservoir.

• Check the windshield washer fluid

level.

Any adverse conditions should be

brought to the attention of your deal-

er as soon as possible.

These Owner Maintenance Checks

are generally not covered by war-

ranties and you may be charged for

labor, parts and lubricants used.

• Look for low or under-inflated tires.

• Check the radiator and condenser.

Check if the front of the radiator

and condenser are clean and not

blocked with leaves, dirt or insects

etc.

If any of the above parts are

extremely dirty or you are not sure

of their condition, we recommend

that you contact an authorized

HYUNDAI dealer.

• If any slipping or changes in the

operation of your transaxle occurs,

check the transaxle fluid level.

WARNING

• Check Continuously Variable

Transaxle P (Park) function.

Be careful when checking your

engine coolant level when the

engine is hot. Scalding hot coolant

and steam may blow out under

pressure. This could cause burns

or other serious injury.

• Check the parking brake.

• Check for fluid leaks under your

vehicle (water dripping from the air

conditioning system during or after

use is normal).

1.'

At least monthly:

• Check the coolant level in the

engine coolant reservoir.

• Check the operation of all exterior

lights, including the stoplights, turn

signals and hazard warning flash-

ers.

• Check the inflation pressures of all

tires including the spare for tires

that are worn, show uneven wear,

or are damaged.

At least twice a year

At least once a year:

• Clean the body and door drain

holes.

• Lubricate the door hinges and

checks, and hood hinges.

• Lubricate the door and hood locks

and latches.

• Lubricate the door rubber weather-

strips.

• Check the air conditioning system.

• Inspect and lubricate Continuously

Variable Transaxle linkage and

controls.

• Clean the battery and terminals.

• Check the brake/clutch fluid level.

(i.e., every Spring and Fall):

• Check the radiator, heater and air

conditioning hoses for leaks or

damage.

• Check the windshield washer

spray and wiper operation. Clean

wiper blades with clean cloth

dampened with washer fluid.

• Check the headlight alignment.

• Check the muffler, exhaust pipes,

shields and clamps.

• Check for loose wheel lug nuts.

• Check the lap/shoulder belts for

wear and function.

1.1

,204/3424-3

ꢎꢉꢑ$ꢒꢓꢔ$ꢒ#ꢁ !"ꢍ$" "ꢉ$#ꢎ$ꢌꢏ!ꢉ$##

Follow Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply.

If any of the following conditions apply, you must follow the Maintenance Under Severe Usage Conditions.

• Repeated driving short distance of less than 8 km (5 miles) in normal temperature or less than 16 km(10 miles) in

freezing temperature

• Extensive engine idling or low speed driving for long distances

• Driving on rough, dusty, muddy, unpaved, graveled or salt-spread roads

• Driving in areas using salt or other corrosive materials or in very cold weather

• Driving in the condition of inflowing sand or dust into engine

• Driving in heavy traffic area

• Driving on uphill, downhill, or mountain road repeatedly

• Towing a trailer or using a camper, or roof rack

• Driving as a patrol car, taxi, other commercial use of vehicle towing

• Driving over 170 km/h (106 mile/h)

• Frequently driving in stop-and-go condition

If your vehicle is operated under the above conditions, you should inspect, replace or refill more frequently than the

following Normal Maintenance Schedule. After the periods or distance shown in the chart, continue to follow the pre-

scribed maintenance intervals.

1.&ꢌ

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ 0%42/, %.').% ꢑ#/.4ꢅ

-!).4%.!.#%

).4%26!,3

.UMBER OF MONTHS OR DRIVING DISTANCEꢁ WHICHEVER COMES FIRST

+MS§ꢃꢁꢄꢄꢄ

ꢃꢅꢆ

ꢃꢄ

ꢇꢄ

ꢈꢄ

ꢉꢄ

ꢆꢄ

ꢊꢄ

ꢋꢄ

ꢌꢄ

-ONTHS

9EARS

ꢇ

ꢂ

ꢃꢇ

ꢃ

ꢇꢉ

ꢇ

ꢈꢊ

ꢈ

ꢉꢌ

ꢉ

ꢊꢄ

ꢆ

ꢋꢇ

ꢊ

ꢌꢉ

ꢋ

ꢍꢊ

ꢌ

-!).4%.!.#%

)4%-

%.').% "!9

%NGINE OIL ꢎ FILTERꢏ^ꢃꢏ^ꢇꢏ^ꢈ

$RIVE BELTS

)

ꢂ

)

2

ꢂ

2

ꢂ

2

)

2

ꢂ

2

ꢂ

2

)

2

ꢂ

2

ꢂ

!IR CLEANER FILTER

#

)

#

)

2

)

#

)

#

)

2

)

#

)

#

)

"ATTERY CONDITION ꢎ SPECIFIC GRAVITY

4HROTTLE BODY

ꢂ

#

ꢃꢄ

ꢏ

2EPLACE AT EVERY ꢊꢄꢁꢄꢄꢄ +M OR ꢋꢇ MONTHS

)NSPECT AT EVERY ꢍꢄꢁꢄꢄꢄ KMS OR ꢃꢄꢌ MONTHS

3PARK PLUGS

ꢉ

ꢏ

6ALVE CLEARANCE

6ACCUM (OSES

ꢂ

)

ꢂ

)

ꢂ

)

ꢂ

)

ꢂ

)DLERꢐDAMPER PULLEY

0OWER STEERING FLUID AND HOSES

"RAKEꢐ#LUTCH FLUID

)NSPECT WHEN REPLACING THE DRIVE BELT

.OT APPLICABLE

ꢀ

)

ꢆ

)NSPECT AT EVERY SERVICE ꢒ 2EPLACE AT EVERY ꢇꢃꢄꢁꢄꢄꢄ +M OR ꢃꢇꢄ

MONTHSꢁ !FTER THAT REPLACE AT EVERY ꢃꢇꢄꢁꢄꢄꢄ +MS OR ꢃꢇꢄ MONTHS

ꢏ

%NGINE COOLANT ꢑTOPUP ꢎ SPECIFIC GRAVITY

ꢊ

ꢏ

ꢂ

)

ꢂ

-ANUAL TRANSAXLE FLUID

#ONTINUOSLY 6ARIABLE TRANSAXLE FLUID ꢏ^ꢊ

.O #HECK ꢒ .O SERVICE REQUIRED

)

ꢀ )NSPECT AND IF NECESSARY ADJUSTꢁ TOPꢂUPꢁ CLEAN OR REPLACE

#ꢀ #LEAN AND 2EPLACE IF NECESSARY

2 ꢀ 2EPLACE

1.&&

,204/3424-3

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ 0%42/, %.').% ꢑ#/.4ꢅ

-!).4%.!.#%

).4%26!,3

.UMBER OF MONTHS OR DRIVING DISTANCEꢁ WHICHEVER COMES FIRST

+MS§ꢃꢁꢄꢄꢄ

-ONTHS

ꢃꢅꢆ

ꢇ

ꢃꢄ

ꢃꢇ

ꢃ

ꢇꢄ

ꢇꢉ

ꢇ

ꢈꢄ

ꢈꢊ

ꢈ

ꢉꢄ

ꢉꢌ

ꢉ

ꢆꢄ

ꢊꢄ

ꢆ

ꢊꢄ

ꢋꢇ

ꢊ

ꢋꢄ

ꢌꢉ

ꢋ

ꢌꢄ

ꢍꢊ

ꢌ

-!).4%.!.#%

)4%-

9EARS

ꢂ

6%()#,% /. &,//2

7IPER ꢑWIPER BLADE ꢁ WASHER FLUID

)

ꢂ

)

"RAKEꢐ#LUTCH ꢑ0EDAL FREE PLAYꢐ0IPESꢐ(OSESꢐ#ONNECTORS

&UEL FILLER CAP

)

#LIMATE CONTROL AIR FILTER

#

)

2

)

#

)

2

)

#

)

2

)

#

)

2

)

#HECK !# SYSTEM ꢑREFRIGERANTꢐ#OMPRESSOR

#OOLING SYSTEM ꢑWATER PUMPꢁHOSES ꢎ LEAKAGE

6%()#,% /. ,)&4

)

3TEERING GEAR RACKꢁ LINKAGE AND BOOTS

%XHAUST SYSTEM ꢑLEAKAGES ꢎ DAMAGES

&UEL FILTERꢏ^ꢌ

)

ꢂ

)

ꢂ

)

ꢂ

2

)

ꢂ

#HARCOAL CANISTER ꢎ VAPOR HOSE

&RONT ꢎ REAR SUSPENSION ꢑLINKAGES ꢎ BALL JOINTS

)

ꢀ )NSPECT AND IF NECESSARY ADJUSTꢁ TOPꢂUPꢁ CLEAN OR REPLACE

! ꢀ !DD

2 ꢀ 2EPLACE

# ꢀ #LEAN AND REPLACE IF NECESSARY

1.&%

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ 0%42/, %.').% ꢑ#/.4ꢅ

-!).4%.!.#%

).4%26!,3

.UMBER OF MONTHS OR DRIVING DISTANCEꢁ WHICHEVER COMES FIRST

+MS§ꢃꢁꢄꢄꢄ

-ONTHS

ꢃꢅꢆ

ꢇ

ꢃꢄ

ꢃꢇ

ꢇꢄ

ꢇꢉ

ꢈꢄ

ꢈꢊ

ꢉꢄ

ꢉꢌ

ꢆꢄ

ꢊꢄ

ꢋꢇ

ꢋꢄ

ꢌꢉ

ꢌꢄ

ꢍꢊ

-!).4%.!.#%

)4%-

9EARS

ꢂ

ꢃ

ꢇ

ꢈ

ꢉ

ꢆ

ꢊ

ꢋ

ꢌ

&UEL LINESꢁ HOSES AND CONNECTIONS

)

$RIVESHAFTS ꢎ BOOTS

)

&LUID LEAKAGES

)

)NSPECT IF REQUIRED

&RONT AND REAR WHEEL BEARINGS ꢎ BUSHES

&RONT AND REAR DISCꢐDRUM BRAKES ꢎ PADS

)

ꢂ

)

0ARKING BRAKE ꢑDISCꢐDRUMꢁ PADꢐSHOE ꢎ OPERATION

7HEEL !LIGNMENT ꢎ "ALANCING

)NSPECT IF REQUIRED

4YRE 0RESSUREꢁCONDITION ꢎ ROTATION

&).!, #(%#+3

)ꢁ 42

"OLT AND NUTS ON CHASIS AND BODY

,UBRICATE LOCKS ꢎ HINGES

)

,

)

,

)

,

)

,

)

,

)

,

)

,

)

,

)

ꢀ

#HECK ALL ELECTRICAL SYSTEMS ꢑ$RIVE BELTS ꢁALTERNATOR ꢏ^ꢍ

7ARNING LIGHTS OPERATION ꢎ '$3 SYSTEM CHECK

%XT ꢎ INTꢅ LIGHTSꢁ HORN ꢎ GAUGES

)

ꢀ )NSPECT AND IF NECESSARY ADJUSTꢁ TOPꢂUPꢁ CLEAN OR REPLACE

! ꢀ !DD

, ꢀ ,UBRICATE

2 ꢀ 2EPLACE

42 ꢀ 4YRE 2OTATION

1.&+

,204/3424-3

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ 0%42/, %.').% ꢑ#/.4ꢅ

-!).4%.!.#%

).4%26!,3

.UMBER OF MONTHS OR DRIVING DISTANCEꢁ WHICHEVER COMES FIRST

+MS§ꢃꢁꢄꢄꢄ

-ONTHS

ꢃꢅꢆ

ꢇ

ꢃꢄ

ꢃꢇ

ꢇꢄ

ꢇꢉ

ꢈꢄ

ꢈꢊ

ꢉꢄ

ꢉꢌ

ꢆꢄ

ꢊꢄ

ꢋꢇ

ꢋꢄ

ꢌꢉ

ꢌꢄ

ꢍꢊ

-!).4%.!.#%

)4%-

9EARS

ꢃ

ꢇ

ꢈ

ꢉ

ꢆ

ꢊ

ꢋ

ꢌ

ꢂ

)

0OWER WINDOW ꢐ 3UNROOF OPERATION ꢑIF EQUIPPED

!LL SEAT BELT OPERATION

)

)NSPECT IF REQUIRED

2OAD TEST

)

ꢀ )NSPECT AND IF NECESSARY ADJUSTꢁ TOPꢂUPꢁ CLEAN OR REPLACE

!

ꢀ !DD

, ꢀ ,UBRICATE

2 ꢀ 2EPLACE

42 ꢀ 4YRE 2OTATION

1.&)

-!).4%.!.#% 5.$%2 3%6%2% 53!'% #/.$)4)/.3 ꢂ 0%42/, %.').%

4HE FOLLOWING ITEMS MUST BE SERVICED MORE FREQUENTLY ON CARS MAINLY USED UNDER SEVERE DRIVING CONDITIONSꢅ

2EFER TO THE CHART BELOW FOR THE APPROPRIATE MAINTENANCE INTERVALSꢅ

) ꢀ )NSPECT AND IF NECESSARYꢁ ADJUSTꢁ CORRECTꢁ CLEAN OR REPLACE

2 ꢀ 2EPLACE OR CHANGE

-AINTENANCE

-AINTENANCE ITEM

-AINTENANCE INTERVALS

$RIVING CONDITION

OPERATION

!ꢁ "ꢁ #ꢁ $ꢁ %ꢁ

&ꢁ 'ꢁ (ꢁ )ꢁ *

%NGINE OIL AND ENGINE OIL FILTER

!IR CLEANER FILTER

%VERY ꢆꢁꢄꢄꢄ KM OR ꢊ MONTHS

2

2EPLACE MORE FREQUENTLY

DEPENDING ON THE CONDITION

#ꢁ %

"ꢁ (

2EPLACE MORE FREQUENTLY

DEPENDING ON THE CONDITION

3PARK PLUGS

-ANUAL TRANSAXLE FLUID ꢑIF EQUIPPED

%VERY ꢃꢇꢄꢁꢄꢄꢄ KM

%VERY ꢃꢄꢄꢁꢄꢄꢄ KM

#ꢁ $ꢁ %ꢁ &ꢁ 'ꢁ (ꢁ )ꢁ *

#ONTINUOUSLY 6ARIABLE 4RANSAXLE FLUID

ꢑIF EQUIPPED

!ꢁ #ꢁ $ꢁ %ꢁ

&ꢁ 'ꢁ (ꢁ )ꢁ *

2

)

)NSPECT MORE FREQUENTLY

DEPENDING ON THE CONDITION

3TEERING GEAR RACKꢁ LINKAGE AND BOOTS

#ꢁ $ꢁ %ꢁ &ꢁ '

ꢀ

1.&(

,204/3424-3

-AINTENANCE

OPERATION

-AINTENANCE ITEM

-AINTENANCE INTERVALS

$RIVING CONDITION

#ꢁ $ꢁ %ꢁ &ꢁ '

#ꢁ $ꢁ %ꢁ 'ꢁ (

#ꢁ $ꢁ 'ꢁ (

)NSPECT MORE FREQUENTLY

DEPENDING ON THE CONDITION

&RONT SUSPENSION BALL JOINTS

$ISC BRAKES AND PADSꢁ CALIPERS AND ROTORS

$RUM BRAKES AND LININGS

0ARKING BRAKE

)

)NSPECT MORE FREQUENTLY

DEPENDING ON THE CONDITION

)NSPECT MORE FREQUENTLY

DEPENDING ON THE CONDITION

)NSPECT MORE FREQUENTLY

DEPENDING ON THE CONDITION

)NSPECT MORE FREQUENTLY

DEPENDING ON THE CONDITION

$RIVESHAFT AND BOOTS

#ꢁ $ꢁ %ꢁ &ꢁ 'ꢁ (ꢁ )ꢁ *

#ꢁ %

)NSPECT MORE FREQUENTLY

DEPENDING ON THE CONDITION

#LIMATE CONTROL AIR FILTER

3EVERE DRIVING CONDITIONS

& ꢀ $RIVING IN HEAVY TRAFFIC AREA

' ꢀ $RIVING IN MOUNTAINOUS AREAS

( ꢀ 4OWING A TRAILER

! ꢀ 2EPEATED SHORT DISTANCE DRIVING

" ꢀ %XTENSIVE IDLING

# ꢀ $RIVING IN DUSTYꢁ ROUGH ROADS

) ꢀ $RIVING FOR PATROL CARꢁ TAXIꢁ COMMERCIAL CAR OR VEHICLE

TOWING

* ꢀ $RIVING OVER ꢃꢋꢄ KMꢐH ꢑꢃꢄꢊ MILEꢐH

$ ꢀ $RIVING IN AREAS USING SALT OR OTHER CORROSIVE

MATERIALS OR IN VERY COLD WEATHER

% ꢀ $RIVING IN THE CONDITION OF INFLOWING SAND OR DUST INTO

ENGINE

1.&#

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ &/2 0%42/, ꢎ $)%3%, %.').%

4HE FOLLOWING MAINTENANCE SERVICES MUST BE PERFORMED TO ENSURE GOOD EMISSION CONTROL AND PERFORMANCEꢅ +EEP RECEIPTS FOR ALL

VEHICLE EMISSION SERVICES TO PROTECT YOUR WARRANTYꢅ 7HERE BOTH KILOMETRES AND TIME ARE SHOWNꢁ THE FREQUENCY OF SERVICE IS DETERꢂ

MINED BY WHICHEVER OCCURS FIRSTꢅ

ꢏ^ꢃꢀ #HECK THE ENGINE OIL LEVEL AND LEAK EVERY ꢆꢄꢄ KM ꢑꢈꢆꢄ

MILES OR BEFORE STARTING A LONG TRIPꢅ

ꢏ^ꢊꢀ -ANUALꢐ#64 TRANSAXLE FLUID SHOULD BE CHANGED ANYTIME THE VEHIꢂ

CLE HAS BEEN SUBMERGED IN WATERꢅ

ꢏ^ꢇꢀ $RIVING IN AMBIENT TEMPERATURE OVER ꢉꢄ # ꢑꢃꢄꢉ & OR DRIVꢂ

ING AT CONSTANT HIGHWAY SPEEDS MUST CONFORM THE SEVERE

DRIVING CONDITIONꢅ

ꢏ^ꢈꢀ 4HE ENGINE OIL LEVEL SHOULD BE CHECKED REGULARLY AND MAINꢂ

TAINED PROPERLYꢅ /PERATING WITH AN INSUFFICIENT AMOUNT OF OIL

CAN DAMAGE THE ENGINEꢁ AND SUCH DAMAGE IS NOT COVERED

BY WARRANTYꢅ

ꢏ^ꢉꢀ )NSPECT FOR EXCESSIVE VALVE NOISE ANDꢐOR ENGINE VIBRATION

AND ADJUST IF NECESSARYꢅ 7E RECOMMEND THAT AN AUTHORIZED

(95.$!) DEALER SHOULD PERFORM THE OPERATIONꢅ

ꢏ^ꢆꢀ 7HEN ADDING COOLANTꢁ USE ONLY DEIONISED WATER OR SOFT

WATER FOR YOUR VEHICLE AND NEVER MIX HARD WATER IN THE

COOLANT FILLED AT THE FACTORYꢅ !N IMPROPER COOLANT MIXTURE CAN

RESULT IN SERIOUS MALFUNCTION OR ENGINE DAMAGEꢅ

ꢏ^ꢋꢀ )F GOOD QUALITY PETROLS THAT MEET %UROPE &UEL STANDARDS

ꢑ%.ꢇꢇꢌ OR EQUIVALENTS INCLUDING FUEL ADDITIVES IS NOT AVAILꢂ

ABLEꢁ ONE BOTTLE OF ADDITIVE IS RECOMMENDEDꢅ !DDITIVES ARE

AVAILABLE FROM YOUR AUTHORISED (95.$!) DEALER ALONG WITH

INFORMATION ON HOW TO USE THEMꢅ $O NOT MIX OTHER ADDITIVES

ꢏ^ꢌꢀ -AINTENANCE SCHEDULE DEPENDS ON FUEL QUALITYꢅ )F THERE ARE

SOME IMPORTANT MATTERS LIKE FUEL FLOW RESTRICTIONꢁ SURGINGꢁ

LOSS OF POWERꢁ DIFFICULTY IN STARTING PROBLEMS ETCꢁ WE

RECOMMEND REPLACING THE FUEL FILTER IMMEDIATELY REGARDLESS

OF THE MAINTENANCE SCHEDULE AND CONSULTING WITH AN AUTHOꢂ

RISED (95.$!) DEALER FOR DETAILSꢅ

ꢏ^ꢍꢀ )NSPECT DRIVE BELT TENSIONERꢁ IDLER ꢎ ALTERNATOR PULLEYꢁ 3TARTER

AND ALL CHASSIS ELECTRICAL ITEMSꢅ #ORRECT OR REPLACEꢁ IF NECꢂ

ESSARYꢅ

ꢀ

ꢏ^ꢃꢄꢀ&OR YOUR CONVENIENCEꢁ IT CAN BE REPLACED PRIOR TO ITgS INTERVAL

WHEN YOU DO MAINTENANCE OF OTHER ITEMSꢅ

1.&$

,204/3424-3

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ $)%3%, %.').%

-!).4%.!.#%

).4%26!,3

.UMBER OF MONTHS OR DRIVING DISTANCEꢁ WHICHEVER COMES FIRST

+MS§ꢃꢁꢄꢄꢄ

-ONTHS

ꢃꢅꢆ

ꢇ

ꢃꢄ

ꢃꢇ

ꢃ

ꢇꢄ

ꢇꢉ

ꢇ

ꢈꢄ

ꢈꢊ

ꢈ

ꢉꢄ

ꢉꢌ

ꢉ

ꢆꢄ

ꢊꢄ

ꢆ

ꢊꢄ

ꢋꢇ

ꢊ

ꢋꢄ

ꢌꢉ

ꢋ

ꢌꢄ

ꢍꢊ

ꢌ

-!).4%.!.#%

)4%-

9EARS

ꢂ

%.').% "!9

ꢏ^ꢃꢏ^ꢇꢏ^ꢈ

)

ꢂ

)

2

ꢂ

2

ꢂ

2

ꢂ

2

ꢂ

2

ꢂ

2

ꢂ

2

ꢂ

2

)

%NGINE OIL ꢎ FILTER

$RIVE BELTS

!IR CLEANER FILTER

#

)

2

)

#

)

2

)

#

)

2

)

#

)

2

)

"ATTERY CONDITION ꢎ SPECIFIC GRAVITY

ꢏ^ꢉ

)NSPECT AT EVERY ꢍꢄꢁꢄꢄ KMS OR ꢃꢄꢌ MONTHS

6ALVE CLEARANCE ꢑIF APPLICABLE

(OSES ꢑ6ACCUMꢐ %'2 ꢐ 6'4ꢐ 7'4

)DLERꢐDAMPER PULLEY

ꢂ

)

ꢂ

)NSPECT WHEN REPLACING THE DRIVE BELT OR TIMING BELTꢐCHAIN

"RAKEꢐ#LUTCH FLUID

)

ꢆ

)NSPECT AT EVERY SERVICE ꢒ 2EPLACE AT EVERY ꢇꢃꢄꢁꢄꢄꢄ +M OR ꢃꢇꢄ

MONTHSꢁ !FTER THAT REPLACE AT EVERY ꢃꢇꢄꢁꢄꢄꢄ +MS OR ꢃꢇꢄ MONTHS

ꢏ

%NGINE COOLANT ꢑTOPUP ꢎ SPECIFIC GRAVITY

ꢊ

ꢏ

ꢂ

)

ꢂ

-ANUAL TRANSAXLE FLUID

#ONTINOUSLY 6ARIABLE TRANSAXLE FLUID ꢏ^ꢊ

.O #HECK ꢒ .O 3ERVICE REQDꢅ

) ꢀ )NSPECT AND IF NECESSARY ADJUSTꢁ TOPꢂUPꢁ CLEAN OR REPLACE

2 ꢀ 2EPLACE

# ꢀ #LEAN AND 2EPLACE IF NECESSARY

1.&'

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ $)%3%, %.').% ꢑ#/.4ꢅ

-!).4%.!.#%

).4%26!,3

.UMBER OF MONTHS OR DRIVING DISTANCEꢁ WHICHEVER COMES FIRST

+MS§ꢃꢁꢄꢄꢄ

-ONTHS

ꢃꢅꢆ

ꢇ

ꢃꢄ

ꢃꢇ

ꢃ

ꢇꢄ

ꢇꢉ

ꢇ

ꢈꢄ

ꢈꢊ

ꢈ

ꢉꢄ

ꢉꢌ

ꢉ

ꢆꢄ

ꢊꢄ

ꢆ

ꢊꢄ

ꢋꢇ

ꢊ

ꢋꢄ

ꢌꢉ

ꢋ

ꢌꢄ

ꢍꢊ

ꢌ

-!).4%.!.#%

)4%-

9EARS

ꢂ

6%()#,% /. &,//2

7IPER ꢑWIPER BLADE ꢁ WASHER FLUID

)

ꢂ

)

"RAKEꢐ#LUTCH ꢑPEDAL FREE PLAYꢐPIPESꢐHOSESꢐCONNECTORS

&UEL FILLER CAP

)

#LIMATE CONTROL AIR FILTER

#

)

2

)

#

)

2

)

#

)

2

)

#

)

2

)

#HECK !# SYSTEM ꢑREFRIGERANTꢐCOMPRESSOR

#OOLING SYSTEM ꢑWATER PUMPꢁHOSES ꢎ LEAKAGE

6%()#,% /. ,)&4

)

.OT APPLICABLE

ꢉ7$ 3HAFT $IFFERENTIAL 4RANSFER CASE OIL ꢑIF APPLICABLE

3TEERING GEAR RACKꢁ LINKAGE AND BOOTS

%XHAUST SYSTEM ꢑLEAKAGES ꢎ DAMAGES

&UEL FILTER CARTRIDGEꢏ^ꢌ

)

ꢂ

)

ꢂ

)

ꢂ

)

ꢂ

)

ꢂ

)

ꢀ

)

2

.OT APPLICABLE

&UEL TANK AIR FILTER ꢑ)F EQUIPPED

&RONT ꢎ REAR SUSPENSION ꢑLINKAGES ꢎ BALL JOINTS

)

) ) ꢀ )NSPECT AND IF NECESSARY ADJUSTꢁ TOPꢂUPꢁ CLEAN OR REPLACE

2 ꢀ 2EPLACE

! ꢀ !DD

# ꢀ #LEAN AND REPLACE IF NECESSARY

1.&1

,204/3424-3

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ $)%3%, %.').% ꢑ#/.4ꢅ

-!).4%.!.#%

).4%26!,3

.UMBER OF MONTHS OR DRIVING DISTANCEꢁ WHICHEVER COMES FIRST

+MS§ꢃꢁꢄꢄꢄ

-ONTHS

ꢃꢅꢆ

ꢇ

ꢃꢄ

ꢃꢇ

ꢇꢄ

ꢇꢉ

ꢈꢄ

ꢈꢊ

ꢉꢄ

ꢉꢌ

ꢆꢄ

ꢊꢄ

ꢋꢇ

ꢋꢄ

ꢌꢉ

ꢌꢄ

ꢍꢊ

-!).4%.!.#%

)4%-

9EARS

ꢂ

ꢃ

ꢇ

ꢈ

ꢉ

ꢆ

ꢊ

ꢋ

ꢌ

&UEL LINESꢁ HOSES AND CONNECTIONS

$RIVESHAFTS ꢎ BOOTS

)

&LUID LEAKAGES

)

)NSPECT IF REQUIRED

&RONT AND REAR WHEEL BEARINGS ꢎ BUSHES

&RONT AND REAR DISCꢐDRUM BRAKES ꢎ PADS

)

ꢂ

)

0ARKING BRAKE ꢑDISCꢐDRUM ꢁPADꢐSHOE ꢎ OPERATION

7HEEL !LIGNMENT ꢎ "ALANCING ꢑ)F REQUIRED

4YRE PRESSUREꢁ CONDITION ꢎ ROTATION

&).!, #(%#+3

)NSPECT IF REQUIRED

)ꢁ 42

"OLT AND NUTS ON CHASIS AND BODY

,UBRICATE LOCKS ꢎ HINGES

)

,

)

,

)

,

)

,

)

,

)

,

)

,

)

,

)

#HECK ALL ELECTRICAL SYSTEMS ꢑ$RIVE BELTS ꢁALTERNATOR ꢏ^ꢍ

7ARNING LIGHTS OPERATION ꢎ '$3 SYSTEM CHECK

%XT ꢎ )NTꢅ LIGHTSꢁ HORN ꢎ GAUGES

)

ꢀ )NSPECT AND IF NECESSARY ADJUSTꢁ TOPꢂUPꢁ CLEAN OR REPLACE

! ꢀ !DD

, ꢀ ,UBRICATE

2 ꢀ 2EPLACE

42 ꢀ 4YRE 2OTATION

1.%ꢌ

./2-!, -!).4%.!.#% 3#(%$5,% ꢂ $)%3%, %.').% ꢑ#/.4ꢅ

-!).4%.!.#%

).4%26!,3

.UMBER OF MONTHS OR DRIVING DISTANCEꢁ WHICHEVER COMES FIRST

+MS§ꢃꢁꢄꢄꢄ

-ONTHS

ꢃꢅꢆ

ꢇ

ꢃꢄ

ꢃꢇ

ꢇꢄ

ꢇꢉ

ꢈꢄ

ꢈꢊ

ꢉꢄ

ꢉꢌ

ꢆꢄ

ꢊꢄ

ꢋꢇ

ꢋꢄ

ꢌꢉ

ꢌꢄ

ꢍꢊ

-!).4%.!.#%

)4%-

9EARS

ꢃ

ꢇ

ꢈ

ꢉ

ꢆ

ꢊ

ꢋ

ꢌ

ꢂ

)

0OWER WINDOW ꢐ 3UNROOF OPERATION ꢑIF EQUIPPED

!LL SEAT BELT OPERATION

)

)NSPECT IF REQUIRED

2OAD TEST

)

ꢀ )NSPECT AND IF NECESSARY ADJUSTꢁ TOPꢂUPꢁ CLEAN OR REPLACE

!ꢀ!DD

, ꢀ ,UBRICATE

2 ꢀ 2EPLACE

42 ꢀ 4YRE 2OTATION

ꢀ

1.%&

,204/3424-3

-!).4%.!.#% 5.$%2 3%6%2% 53!'% #/.$)4)/.3 ꢂ $)%3%, %.').%

4HE FOLLOWING ITEMS MUST BE SERVICED MORE FREQUENTLY ON CARS MAINLY USED UNDER SEVERE DRIVING CONDITIONSꢅ

2EFER TO THE CHART BELOW FOR THE APPROPRIATE MAINTENANCE INTERVALSꢅ

2 ꢀ 2EPLACE

) ꢀ )NSPECT AND IF NECESSARYꢁ ADJUSTꢁ CORRECTꢁ CLEAN OR REPLACE

#

-AINTENANCE

OPERATION

-AINTENANCE INTERVALS

-!).4%.!.#% )4%-

$RIVING CONDITION

!ꢁ "ꢁ #ꢁ &ꢁ 'ꢁ

(ꢁ )ꢁ *ꢁ +ꢁ ,

%NGINE OIL AND ENGINE OIL FILTER

!IR CLEANER FILTER

2

)

%VERY ꢆꢁꢄꢄꢄ KMS OR ꢊ MONTHS

2EPLACE MORE FREQUENTLY

#ꢁ %

DEPENDING ON THE CONDITION

-ANUAL TRANSAXLE FLUID ꢑIF EQUIPPED

3TEERING GEAR RACKꢁ LINKAGE AND BOOTS

#64 TRANSAXLE FLUID ꢑIF EQUIPPED

%VERY ꢃꢇꢄꢁꢄꢄꢄ KMS

#ꢁ $ꢁ %ꢁ 'ꢁ (ꢁ )ꢁ +

#ꢁ $ꢁ %ꢁ &ꢁ '

)NSPECT MORE FREQUENTLY

DEPENDING ON THE CONDITION

2

%VERY ꢃꢄꢄꢁꢄꢄꢄ KMS

#ꢁ $ꢁ %ꢁ 'ꢁ (ꢁ )ꢁ +

1.%%

-AINTENANCE

OPERATION

-AINTENANCE INTERVALS

-!).4%.!.#% )4%-

$RIVING CONDITION

#ꢁ $ꢁ %ꢁ &ꢁ '

)NSPECT MORE FREQUENTLY

&RONT SUSPENSION BALL JOINTS

)

DEPENDING ON THE CONDITION

)NSPECT MORE FREQUENTLY

$ISC BRAKES AND PADSꢁ CALIPERS AND ROTORS

0ARKING BRAKE

)

#ꢁ $ꢁ %ꢁ 'ꢁ (

#ꢁ $ꢁ 'ꢁ (

DEPENDING ON THE CONDITION

)NSPECT MORE FREQUENTLY

)

DEPENDING ON THE CONDITION

#ꢁ $ꢁ %ꢁ &ꢁ 'ꢁ (ꢁ

)ꢁ *ꢁ +ꢁ ,

)NSPECT MORE FREQUENTLY

$RIVE SHAFT AND BOOTS

)

DEPENDING ON THE CONDITION

)NSPECT MORE FREQUENTLY

#LIMATE CONTROL AIR FILTER ꢑIF EQUIPPED

#ꢁ %

DEPENDING ON THE CONDITION

3EVERE DRIVING CONDITIONS

! ꢀ 2EPEATED SHORT DISTANCE DRIVING

" ꢀ %XTENSIVE IDLING

' ꢀ $RIVING IN MOUNTAINOUS AREASꢅ

( ꢀ 4OWING A TRAILER

) ꢀ $RIVING FOR PATROL CARꢁ TAXIꢁ COMMERCIAL CAR OR VEHICLE

TOWING

* ꢀ $RIVING IN VERY COLD WEATHER

+ ꢀ $RIVING OVER ꢃꢋꢄ KMꢐH ꢑꢃꢄꢊ MILEꢐH

, ꢀ &REQUENTLY DRIVING IN STOPꢂANDꢂGO CONDITIONS

ꢀ

# ꢀ $RIVING IN DUSTYꢁ ROUGH ROADS

$ ꢀ $RIVING IN AREAS USING SALT OR OTHER CORROSIVE

MATERIALS OR IN VERY COLD WEATHER

% ꢀ $RIVING IN THE CONDITION OF INFLOWING SAND OR DUST INTO

ENGINE

& ꢀ $RIVING IN HEAVY TRAFFIC AREA

1.%+

,204/3424-3

$ꢕꢋꢔ " ꢍ!ꢊ"#ꢊꢖ#ꢎꢉꢑ$ꢒꢓꢔ$ꢒ#ꢁ !"ꢍ$" "ꢉ$#!ꢍ$ꢁꢎ

Engine oil and filter

Fuel filter

Fuel lines, fuel hoses and con-

nections

The engine oil and filter should be A clogged filter can limit the speed at

changed at the intervals specified in which the vehicle may be driven,

the maintenance schedule. If the car damage the emission system and

is being driven in severe conditions, cause multiple issues such as hard

more frequent oil and filter changes starting. If an excessive amount of

Check the fuel lines, fuel hoses and

connections for leakage and dam-

age. We recommend that the fuel

lines, fuel hoses and connections be

replaced by an authorized HYUNDAI

dealer.

are required.

foreign matter accumulates in the

fuel tank, the filter may require

replacement more frequently.

After installing a new filter, run the

engine for several minutes, and

check for leaks at the connections.

We recommend that the fuel filter be

replaced by an authorized HYUNDAI

dealer.

Drive belts

WARNING

Inspect all drive belts for evidence of

cuts, cracks, excessive wear or oil

saturation and replace if necessary.

Drive belts should be checked peri-

odically for proper tension and

adjusted as necessary.

Diesel only

Never work on injection system

with engine running or within 30

seconds after shutting off engine.

High pressure pump, rail, injectors

and high pressure pipes are sub-

ject to high pressure even after

the engine stopped. The fuel jet

produced by fuel leaks may cause

serious injury, if it touch the body.

People using pacemakers should

not move than 30cm closer to the

ECU or wiring harness within the

engine room while engine is run-

ning, since the high currents in the

Common Rail system produce

considerable magnetic fields.

NOTICE

When you are inspecting the belt,

place the ignition switch in the

LOCK/OFF or ACC position.

1.%)

Vapor hose and fuel filler cap

Vacuum crankcase ventilation

hoses (if equipped)

Air cleaner filter

The vapor hose and fuel filler cap

should be inspected at those inter-

vals specified in the maintenance

schedule. Make sure that a new

vapor hose or fuel filler cap is cor-

rectly replaced.

We recommend that the air cleaner

filter be replaced by an authorized

HYUNDAI dealer.

Inspect the surface of hoses for evi-

dence of heat and/or mechanical

damage. Hard and brittle rubber,

cracking, tears, cuts, abrasions, and

excessive swelling indicate deterio-

ration. Particular attention should be

paid to examine those hose surfaces

nearest to high heat sources, such

as the exhaust manifold.

Spark plugs

Make sure to install new spark plugs

of the correct heat range.

WARNING

Inspect the hose routing to assure

that the hoses do not come in con-

tact with any heat source, sharp

edges or moving component which

might cause heat damage or

mechanical wear. Inspect all hose

connections, such as clamps and

couplings, to make sure they are

secure, and that no leaks are pres-

ent. Hoses should be replaced

immediately if there is any evidence

of deterioration or damage.

Do not disconnect and inspect

spark plugs when the engine is

hot. You may burn yourself.

1.%(

,204/3424-3

Cooling system

Continuously Variable Transaxle

fluid (if equipped)

NOTICE

Check cooling system components,

such as radiator, coolant reservoir,

hoses and connections for leakage

and damage. Replace any damaged

parts.

The use of non-specified fluid (even

marked as compatible with genuine)

could result in shift quality deteriora-

tion and vibrations, eventually, the

transaxle failure.

Use only specified Continuously

Variable Transaxle fluid. (Refer to

"Recommended lubricants and

capacities" in chapter 8.)

Continuously Variable Transaxle fluid

should not be checked under normal

usage conditions.

But, the Continuously Variable

Transaxle fluid should be changed

under severe usage conditions. We

recommend that the Continuously

Variable Transaxle fluid changed by

an authorized HYUNDAI dealer

according to the maintenance sched-

ule. (Refer to “Maintenance Under

Severe Usage Conditions” in this

chapter. )

Coolant

The coolant should be changed at

the intervals specified in the mainte-

nance schedule.

Brake hoses and lines

Manual transaxle fluid

(if equipped)

Inspect the manual transaxle fluid

according to the maintenance sched-

ule.

Visually check for proper installation,

chafing, cracks, deterioration and

any leakage. Replace any deteriorat-

ed or damaged parts immediately.

i

Information

Continuously Variable Transaxle fluid

color is basically light amber.

Brake fluid

As the vehicle is driven, the

Continuously Variable Transaxle fluid

will begin to look darker.

Check brake fluid level in the brake

fluid reservoir. The level should be

between "MIN" (Minimum) and

"MAX" (Maximum) marks on the side

of the reservoir. Use only hydraulic

brake fluid conforming to DOT 3 or

DOT 4 specification.

It is normal condition and you should

not judge the need to replace the fluid

based upon the changed color.

1.%#

Parking brake

Drive shafts and boots

Inspect the parking brake system Check the drive shafts, boots and

including the parking brake pedal clamps for cracks, deterioration, or

and cables.

damage. Replace any damaged

parts and, if necessary, repack the

grease.

Brake discs, pads, calipers and

rotors

Check the pads for excessive wear,

discs for run out and wear, and

calipers for fluid leakage.

Air conditioning refrigerant

(if equipped)

Check the air conditioning lines and

connections for leakage and dam-

age.

Suspension mounting bolts

Check the suspension connections

for looseness or damage. Retighten

to the specified torque.

Steering gear box, linkage &

boots/lower arm ball joint

With the vehicle stopped and engine

off, check for excessive free-play in

the steering wheel.

Check the linkage for bends or dam-

age. Check the dust boots and ball

joints for deterioration, cracks, or

damage. Replace any damaged

parts.

1.%$

,204/3424-3

$"ꢈ!"$#ꢊ!ꢔ

Checking the engine oil level

(Petrol engiene)

WARNING

Radiator hose

Be very careful not to touch the

radiator hose when checking or

adding the engine oil as it may be

hot enough to burn you.

CAUTION

OIB074006

If it is near or at L (Low), add enough

oil to bring the level to F (Full). Do not

overfill.

Use a funnel to help prevent oil from

being spilled on engine components.

Use only the specified engine oil.

(Refer to "Recommended lubricants

and capacities" in chapter 8.)

• Do not overfill the engine oil. It

may damage the engine.

• Do not spill engine oil, when

adding or changing engine oil. If

you drop the engine oil on the

engine room, wipe it off immedi-

ately.

• When you wipe the oil level

gauge, you should wipe it with a

clean cloth. When mixed with

debris, it can cause engine dam-

age.

OIB074004

1.Be sure the vehicle is on level

ground.

2.Start the engine and allow it to

reach normal operating tempera-

ture.

3.Turn the engine off and wait for a

few minutes (about 5 minutes) for

the oil to return to the oil pan.

4.Pull the dipstick out, wipe it clean,

and reinsert it fully.

5.Pull the dipstick out again and

check the level.The level should be

between F (Full) and L (Low).

1.%'

,204/3424-3

Changing the coolant

WARNING

We recommend that the coolant be

replaced by an authorized HYUNDAI

dealer.

Coolant

• Do not use radiator coolant or

antifreeze in the washer fluid

reservoir.

NOTICE

Put a thick cloth or fabric around the

radiator cap before refilling the

coolant in order to prevent the

coolant from overflowing into engine

parts such as the alternator.

• Radiator coolant can severely

obscure visibility when sprayed

on the windshield and may

cause loss of vehicle control or

damage to paint and body trim.

1.+)

,204/3424-3

NOTICE

WARNING

Do not allow brake/clutch fluid to

contact the vehicle's body paint, as

paint damage will result.

Brake/clutch fluid

When changing and adding

brake/clutch fluid, handle it care-

fully. Do not let it come in contact

with your eyes. If brake/clutch fluid

come in contact with your eyes,

immediately flush them with a

large quantity of fresh tap water.

Have your eyes examined by a

doctor as soon as possible.

Brake/clutch fluid, which has been

exposed to open air for an extended

time should never be used as its

quality cannot be guaranteed. It

should be properly disposed. Don't

put in the wrong kind of fluid. A few

drops of mineral-based oil, such as

engine oil, in your brake/clutch sys-

tem can damage brake/clutch sys-

tem parts.

1.+#

ꢐ ꢎꢑ$ꢌ#ꢖꢔꢓ!ꢒ

ꢋ ꢌꢗ!"ꢈ#ꢘꢌ ꢗ$#

Checking the parking brake

Checking the washer fluid level

WARNING

Check the fluid level in the washer

Coolant

• Do not use radiator coolant or

antifreeze in the washer fluid

reservoir.

• Radiator coolant can severely

obscure visibility when sprayed

on the windshield and may

cause loss of vehicle control or

damage to the paint and body

trim.

OIB054004

• Windshield washer fluid agents

contain some amounts of alco-

hol and can be flammable under

certain circumstances. Do not

allow sparks or flame come in

contact with the washer fluid or

the washer fluid reservoir.

Damage to the vehicle or occu-

pants could occur.

• Windshield washer fluid is poi-

sonous to humans and animals.

Do not drink and avoid coming

in contact with the windshield

washer fluid. Serious injury or

death could occur.

OIB074014

Check the stroke of the parking

brake by counting the number of

“clicks’’ heard while fully applying it

from the released position. Also, the

parking brake alone should securely

hold the vehicle on a fairly steep

grade. If the stroke is more or less

than specified, we recommend that

the system be inspected by an

authorized HYUNDAI dealer.

fluid reservoir and add fluid if neces-

sary. Plain water may be used if

washer fluid is not available.

However, use washer solvent with

antifreeze characteristics in cold cli-

mates to prevent freezing.

Stroke : 6~8 “clicks’’ at a force of 20

kg (44 lbs, 196 N).

1.+$

,204/3424-3

ꢖꢓ$ꢔ#ꢖ!ꢔꢍ$ꢌ#ꢙꢖꢊꢌ#ꢒ!$ꢎ$ꢔꢚ

removing the bolt(2) with a cross-

tip screw driver and reinstall the

bolt(2).

Draining water from fuel filter

Extracting air from the fuel filter

The fuel filter for diesel engine plays If you drive until you have no fuel left

an important role of separating water

from fuel and accumulating the water

in its bottom.

5. Pump up and down(1) approxi-

mately 5 times.

If water accumulates in the fuel filter,

the warning light comes on when the

ignition switch is in the ON position.

i

Information

• Use cloths when you extract air so

that the fuel is not sprayed around.

If this warning light turned

on, we recommend that

the system be serviced by

an authorized HYUNDAI

dealer.

• Clean the fuel around the fuel filter

or the injection pump before start-

ing the engine to prevent fire.

• Finally, check each part if the fuel is

leaking.

OIB074016

NOTICE

or if you replace the fuel filter, be

sure to extract air from the fuel sys-

If the water accumulated in the fuel

tem as it makes it difficult to start the

filter is not drained at proper times,

engine.

damages to the major parts such as

the fuel system can be caused by

water permeation in the fuel filter.

1. Pump up and down(1) approxi-

mately 50 times until the pump is

hard.

2. Extract air from the fuel filter by

removing the bolt(2) with a cross-

tip screw driver and reinstall the

bolt(2).

3. Pump up and down(1) approxi-

mately 15 times.

4. Extract air from the fuel filter by

1.+'

!ꢌ#ꢉꢔ$ "$ꢌ#

Filter replacement

NOTICE

• Do not drive with the filter

removed; this will result in exces-

sive engine wear.

• When replacing the air cleaner fil-

ter, be careful that dust or dirt does

not enter the air intake, or damage

may result.

Keep the new filter clean of any

contamination while replacing.

• We recommend that you use parts

for replacement from an author-

ized HYUNDAI dealer.

OIB074018

2. Remove the used filter and wipe

the inside of the air cleaner hous-

ing carefully not to remain dusts in

the cover housing.

3. Place new filter with clean hands

and ensure the rubber gasket is

not taken off.

OIB074017

You can clean the filter when inspect-

ing the air cleaner element.

Clean the filter by using compressed

air.

CAUTION

Don’t clean the used filter. It can

cause contaminations on the

clean side of filter to result in

engine wear or sensors’ failure.

1. Loosen the air cleaner cover

attaching clips and open the cover.

4. Lock the cover with attaching clips.

Replace the filter according to the

Maintenance Schedule.

If the vehicle is operated in extreme-

ly dusty or sandy areas, replace the

element more often than the usual

recommended intervals. (Refer to

“Maintenance under severe usage

conditions” in this chapter.)

1.+1

,204/3424-3

ꢉꢔ!ꢁ ꢍ$#ꢉꢊ"ꢍꢌꢊꢔ# !ꢌ#ꢖ!ꢔꢍ$ꢌ#ꢙ!ꢖ#$ꢛꢓ!ꢋꢋ$ꢒꢚ

Filter inspection

Filter replacement

If the vehicle is operated in the

severely air-polluted cities or on

dusty rough roads for a long period,

it should be inspected more fre-

quently and cleaned earlier. When

you, the owner, clean the climate

control air filter, clean it performing

the following procedure, and be care-

ful to avoid damaging other compo-

nents.

OIB074022

Replace the filter according to the

maintenance Schedule.

2. Push in both sides of the glove box

as shown. This will ensure that the

glove box stopper pins will get

released from its holding location

allowing the glove box to hang.

OIB044021

1. Open the glove box.

1.)ꢌ

OIB074023

ODH073012

4. Clean the climate control air filter.

5. Reassemble in the reverse order

of disassembly.

NOTICE

Install a new climate control air filter in

the correct direction with the arrow

symbol(↓) facing downwards.

OIB074024

Otherwise, the climate control effects

may decrease, possibly with a noise.

3. Remove the climate control air fil-

ter cover by pushing or pressing

the clip (1) on left side.

1.)&

Front windshield wiper blade

Rear window wiper blade

(if equipped)

OLMB073021

OLMB073020

OLMB073023

1. Raise the wiper arm and turn the

wiper blade assembly to expose

the plastic locking clip.

1.Raise the wiper arm and rotate the

wiper blade assembly (1).

2.Pull out the wiper blade assembly.

NOTICE

Do not allow the wiper arm to fall

against the windshield, since it may

chip or crack the windshield.

OLMB073022

2. Compress the clip and slide the

blade assembly downward.

3. Lift it off the arm.

4. Install the blade assembly in the

reverse order of removal.

1.)+

,204/3424-3

OLMB073024

3.Install the new blade assembly by

inserting the center part into the

slot in the wiper arm until it clicks

into place.

4.Make sure the blade assembly is

installed firmly by trying to pull it

slightly.

To prevent damage to the wiper arms

or other components, we recom-

mend that the wiper blade be

replaced by an authorized HYUNDAI

dealer.

1.))

ꢘ ꢍꢍ$ꢌꢜ

For best battery service

(Continued)

i

Information - For batteries

marked with UPPER and

LOWER

Be careful not to spill distilled (or de-

mineralized) water over the battery

surface or other adjacent components.

Also, do not overfill the battery cells.

If not, it may corrode the battery or

other components. Finally, securely

close the cell cap. However, we recom-

mend you to contact an authorized

HYUNDAI dealer for better battery

service.

OIB074026

• Keep the battery securely mount-

ed.

OHYK077011

• Keep the battery top clean and dry.

If your vehicle is equipped with a bat-

tery marked with LOWER (MIN) and

UPPER (MAX) on the side, you

should check the electrolyte level.

• Keep the terminals and connec-

tions clean, tight, and coated with

petroleum jelly or terminal grease.

The electrolyte level should be

between LOWER (MIN) and UPPER

(MAX). When the electrolyte level is

low, add distilled (or de-mineralized)

water. (Never add sulfuric acids or

other electrolyte).

• Rinse any spilled electrolyte from

the battery immediately with a

solution of water and baking soda.

• If the vehicle is not going to be

used for an extended time, discon-

nect the battery cables.

(Continued)

1.)(

,204/3424-3

(Continued)

If any electrolyte gets

(Continued)

An inappropriately dis-

WARNING

Battery dangers

Always read the follow-

into your eyes, flush

your eyes with clean

water for at least 15

minutes and get imme-

diate medical attention.

If electrolyte gets on

your skin, thoroughly

wash the contacted

area. If you feel a pain

or a burning sensation,

get medical attention

immediately.

posed battery can be

harmful to the environ-

ment

and

human

ing instructions careful-

ly when handling a bat-

tery.

health. Dispose the

battery according to

your local law(s) or reg-

ulation.

Keep lighted cigarettes

and all other flames or

sparks away from the

battery.

The battery contains

lead. Do not dispose of

it after use. Please

return the battery to an

authorized HYUNDAI

dealer to be recycled.

Hydrogen, a highly

combustible gas, is

always present in bat-

tery cells and may

explode if ignited.

Wear eye protection

when charging or work-

ing near a battery.

Always provide ventila-

tion when working in an

enclosed space.

• When lifting a plastic-cased bat-

tery, excessive pressure on the

case may cause battery acid to

leak, resulting in personal injury.

Lift with a battery carrier or with

your hands on opposite corners.

Keep batteries out of

the reach of children

because batteries con-

tain highly corrosive

SULFURIC ACID. Do

not allow battery acid to

contact your skin, eyes,

clothing or paint finish.

(Continued)

1.)#

Battery capacity label

Battery recharging

(Continued)

Your vehicle has a maintenance-free,

calcium-based battery.

■ Example

• Never attempt to recharge the

battery when the battery cables

are connected.

• The electrical ignition system

works with high voltage. Never

touch these components with

the engine running or the igni-

tion switched on.

• If the battery becomes discharged

in a short time (because, for exam-

ple, the headlights or interior lights

were left on while the vehicle was

not in use), recharge it by slow

charging (trickle) for 10 hours.

• If the battery gradually discharges

because of high electric load while

the vehicle is being used, recharge

it at 20-30A for two hours.

Failure to follow the above warn-

ings can result in serious bodily

injury or death.

OJD072039

❈ The actual battery label in the vehicle

NOTICE

may differ from the illustration.

If you connect unauthorized elec-

tronic devices to the battery, the bat-

tery may be discharged. Never use

unauthorized devices.

1. CMF60L-BCI : The HYUNDAI

model name of battery

2. 12V : The nominal voltage

3. 60Ah(20HR) : The nominal capac-

ity (in Ampere hours)

4. 92RC : The nominal reserve

capacity (in min.)

5. 550CCA : The cold-test current in

amperes by SAE

6. 440A : The cold-test current in

amperes by EN

1.)$

,204/3424-3

Reset items

• Disconnect the battery charger

in the following order.

1.Turn off the battery charger

main switch.

2.Unhook the negative clamp from

the negative battery terminal.

3.Unhook the positive clamp from

the positive battery terminal.

WARNING

Items should be reset after the bat-

tery has been discharged or the bat-

tery has been disconnected.

• Auto up/down window

(See chapter 3)

• Climate control system

(See chapter 3)

• Audio (See chapter 3)

Recharging battery

When recharging the battery,

observe the following precautions:

• The battery must be removed

from the vehicle and placed in

an area with good ventilation.

• Do not allow cigarettes, sparks,

or flame near the battery.

Battery replacement

Replacing a Battery required precau-

tionary measures.

We recommend that you consult an

authorized HYUNDAI dealer.

• Watch the battery during charg-

ing, and stop or reduce the

charging rate if the battery cells

begin gassing (boiling) violently

or if the temperature of the elec-

trolyte of any cell exceeds 49°C

(120°F).

• Wear eye protection when

checking the battery during

charging.

WARNING

• Before performing maintenance

or recharging the battery, turn

off all accessories and stop the

engine.

• The negative battery cable must

be removed first and installed

last when the battery is discon-

nected.

(Continued)

1.)'

ꢍ!ꢌ$ꢎ# "ꢒ#ꢐꢑ$$ꢔꢎ#

Tire care

WARNING

For proper maintenance, safety, and

maximum fuel economy, you must

always maintain recommended tire

inflation pressures and stay within

the load limits and weight distribution

recommended for your vehicle.

Tire underinflation

Severe underinflation (70 kPa (10

psi) or more) can lead to severe

heat build-up, causing blowouts,

tread separation and other tire fail-

ures that can result in the loss of

vehicle control leading to severe

injury or death. This risk is much

higher on hot days and when driv-

ing for long periods at high

speeds.

Recommended cold tire inflation

pressures

OIB074055

All tire pressures (including the

spare) should be checked when the

tires are cold. “Cold Tires” means the

vehicle has not been driven for at

least three hours or driven less than

1.6 km (one mile).

All specifications (sizes and pres-

sures) can be found on a label

attached to the vehicle.

Recommended pressures must be

maintained for the best ride, top vehi-

cle handling, and minimum tire wear.

For recommended inflation pressure,

refer to “Tire and wheels” in chapter

8.

1.)1

,204/3424-3

NOTICE

• Underinflation also results in • Warm tires normally exceed rec- - Tire pressure

excessive wear, poor handling and

reduced fuel economy. Wheel

deformation also is possible. Keep

your tire pressures at the proper

levels. If a tire frequently needs

refilling, we recommend that the

system be checked by an author-

ized HYUNDAI dealer.

ommended cold tire pressures by

28 to 41 kPa (4 to 6 psi). Do not

release air from warm tires to

adjust the pressure or the tires will

be underinflated.

Always observe the following:

• Check tire pressure when the tires

are cold. (After vehicle has been

parked for at least three hours or

hasn't been driven more than 1.6

km (one mile) since startup.)

• Check the pressure of your spare

tire each time you check the pres-

sure of other tires.

• Never overload your vehicle. Be

careful not to overload a vehicle

luggage rack if your vehicle is

equipped with one.

• Worn, old tires can cause acci-

dents. If your tread is badly worn,

or if your tires have been dam-

aged, replace them.

• Be sure to reinstall the tire inflation

valve caps. Without the valve cap,

dirt or moisture could get into the

valve core and cause air leakage.

If a valve cap is missing, install a

new one as soon as possible.

• Overinflation produces a harsh

ride, excessive wear at the center

of the tire tread, and a greater pos-

sibility of damage from road haz-

ards.

WARNING

Tire Inflation

Overinflation or underinflation can

reduce tire life, adversely affect

vehicle handling, and lead to sud-

den tire failure. This could result in

loss of vehicle control and poten-

tial injury.

1.(ꢌ

Remove the valve cap from the tire

valve stem. Press the tire gage firm-

ly onto the valve to get a pressure

measurement. If the cold tire inflation

pressure matches the recommended

pressure on the tire and loading

information label, no further adjust-

ment is necessary. If the pressure is

low, add air until you reach the rec-

ommended amount.

If you overfill the tire, release air by

pushing on the metal stem in the

center of the tire valve. Recheck the

tire pressure with the tire gage. Be

sure to put the valve caps back on

the valve stems. They help prevent

leaks by keeping out dirt and mois-

ture.

Checking tire inflation pressure

WARNING

Check your tires once a month or

more.

Also, check the tire pressure of the

spare tire.

• Inspect your tires frequently for

proper inflation as well as wear

and damage. Always use a tire

pressure gauge.

• Tires with too much or too little

pressure wear unevenly causing

poor handling, loss of vehicle

control, and sudden tire failure

leading to accidents, injuries,

and even death. The recom-

mended cold tire pressure for

your vehicle can be found in this

manual and on the tire label

located on the driver's side cen-

ter pillar.

How to check

Use a good quality gage to check tire

pressure.You can not tell if your tires

are properly inflated simply by look-

ing at them. Radial tires may look

properly inflated even when they're

underinflated.

Check the tire's inflation pressure

when the tires are cold. - "Cold"

means your vehicle has been sitting

for at least three hours or driven no

more than 1.6 km (1 mile).

• Worn tires can cause accidents.

Replace tires that are worn,

show uneven wear, or are dam-

aged.

• Remember to check the pres-

sure of your spare tire.

HYUNDAI recommends that you

check the spare every time you

check the pressure of the other

tires on your vehicle.

1.(&

,204/3424-3

With a full-size spare tire (if equipped)/For all

5 Steel/5 Alloy wheels

Disc brake pads should be inspected

for wear whenever tires are rotated.

Tire rotation

To equalize tread wear, it is recom-

mended that the tires be rotated

every 10,000 km (6,200 miles) or

sooner if irregular wear develops.

During rotation, check the tires for

correct balance.

i

Information

Rotate radial tires that have an asym-

metric tread pattern only from front

to rear and not from right to left.

When rotating tires, check for uneven

wear and damage. Abnormal wear is

usually caused by incorrect tire pres-

sure, improper wheel alignment, out-

of-balance wheels, severe braking or

severe cornering. Look for bumps or

bulges in the tread or side of tire.

Replace the tire if you find either of

these conditions. Replace the tire if

fabric or cord is visible. After rotation,

be sure to bring the front and rear tire

pressures to specification and check

lug nut tightness.

CBGQ0706

Without a spare tire/4 Alloy wheels & spare

WARNING

wheel with steel rim

• Do not use the compact spare

tire for tire rotation.

• Do not mix bias ply and radial

ply tires under any circum-

stances. This may cause unusu-

al handling characteristics that

could result in death, severe

injury, or property damage.

CBGQ0707

Directional tires (if equipped)

Refer to “Tire and wheels” in chapter

8.

CBGQ0707A

1.(%

Wheel alignment and tire bal-

ance

Tire replacement

NOTICE

When replacing the tires, recheck

and tighten the wheel nuts after driv-

ing about 1,000 km (620miles). If the

steering wheel shakes or the vehicle

vibrates while driving, the tire is out

of balance. Align the tire balance. If

the problem is not solved, we recom-

mend that you contact an authorized

HYUNDAI dealer.

Tread wear indicator

The wheels on your vehicle were

aligned and balanced carefully at the

factory to give you the longest tire life

and best overall performance.

In most cases, you will not need to

have your wheels aligned again.

However, if you notice unusual tire

wear or your vehicle pulling one way

or the other, the alignment may need

to be reset.

OEN076053

WARNING

If you notice your vehicle vibrating

when driving on a smooth road, your

wheels may need to be rebalanced.

If the tire is worn evenly, a tread wear

indicator will appear as a solid band

across the tread. This shows there is

less than 1.6 mm (1/16 inch) of tread

left on the tire. Replace the tire when

this happens.

Do not wait for the band to appear

across the entire tread before replac-

ing the tire.

Replacing tires

To reduce the chance or serious

or fatal injuries from an accident

caused by tire failure or loss of

vehicle control:

• Replace tires that are worn,

show uneven wear, or are dam-

aged. Worn tires can cause loss

of braking effectiveness, steer-

ing control, and traction.

NOTICE

Improper wheel weights can damage

your vehicle's aluminum wheels. Use

only approved wheel weights.

(Continued)

1.(+

,204/3424-3

Compact spare tire replacement

(if equipped)

(Continued)

• Wheels that do not meet

HYUNDAI's specifications may

fit poorly and result in damage to

the vehicle or unusual handling

and poor vehicle control.

• The ABS works by comparing

the speed of the wheels. Tire

size can affect wheel speed.

When replacing tires, all 4 tires

must use the same size original-

ly supplied with the vehicle.

Using tires of a different size can

cause the ABS (Anti-lock Brake

System) and ESC (Electronic

Stability Control) to work irregu-

larly. (if equipped)

• Do not drive your vehicle with

too little or too much pressure in

your tires. This can lead to

uneven wear and tire failure.

• When replacing tires, never mix

radial and bias-ply tires on the

same car. You must replace all

tires (including the spare) if mov-

ing from radial to bias-ply tires.

• It is best to replace all four tires at

the same time. If that is not possi-

ble, or necessary, then replace the

two front or two rear tires as a pair.

Replacing just one tire can serious-

ly affect your vehicle’s handling.

A compact spare tire has a shorter

tread life than a regular size tire.

Replace it when you can see the

tread wear indicator bars on the tire.

The replaced compact spare tire

should be the same size and design

tire as the one provided with your

new vehicle and should be mounted

on the same compact spare tire

wheel. The compact spare tire is not

designed to be mounted on a regular

size wheel, and the compact spare

tire wheel is not designed to mount a

regular size tire.

• Using tires and wheel other than

the recommended sizes could

cause unusual handling charac-

teristics and poor vehicle con-

trol, resulting in a serious acci-

dent.

(Continued)

1.()

Wheel replacement

Tire traction

Tire sidewall labeling

When replacing the metal wheels for Tire traction can be reduced if you

any reason, make sure the new drive on worn tires, tires that are

wheels are equivalent to the original improperly inflated or on slippery

factory units in diameter, rim width road surfaces. Tires should be

1

5,6

7

and offset.

replaced when tread wear indicators

appear. Slow down whenever there

is rain, snow or ice on the road, to

reduce the possibility of losing con-

trol of the vehicle.

4

WARNING

2

A wheel that is not the correct size

may adversely affect wheel and

bearing life, braking and stopping

abilities, handling characteristics,

ground clearance, body-to-tire

clearance, snow chain clearance,

speedometer and odometer cali-

bration, headlight aim and bumper

height.

3

Tire maintenance

In addition to proper inflation, correct

1

I030B04JM

wheel alignment helps decrease tire This information identifies and

wear. If you find a tire worn unevenly, describes the fundamental charac-

have your dealer check the wheel teristics of the tire and also provides

alignment.

the tire identification number (TIN)

for safety standard certification. The

TIN can be used to identify the tire in

case of a recall.

When you have new tires installed,

make sure they are balanced. This

will increase vehicle ride comfort and

tire life. Additionally, a tire should

always be rebalanced if it is removed

from the wheel.

1. Manufacturer or brand name

Manufacturer or Brand name is

shown.

1.((

,204/3424-3

94 - Load Index, a numerical code

associated with the maximum

load the tire can carry.

H - Speed Rating Symbol. See the

speed rating chart in this chapter

for additional information.

2. Tire size designation

Tire speed ratings

A tire’s sidewall is marked with a tire

size designation. You will need this

information when selecting replace-

ment tires for your car. The following

explains what the letters and num-

bers in the tire size designation

mean.

The chart below lists many of the dif-

ferent speed ratings currently being

used for passenger car tires. The

speed rating is part of the tire size

designation on the sidewall of the

tire. This symbol corresponds to that

tire's designed maximum safe oper-

ating speed.

Wheel size designation

Example tire size designation:

Wheels are also marked with impor-

tant information that you need if you

ever have to replace one. The follow-

ing explains what the letters and

numbers in the wheel size designa-

tion mean.

(These numbers are provided as an

example only; your tire size designa-

tor could vary depending on your

vehicle.)

Speed

Rating

Maximum Speed

Symbol

S

T

H

V

W

Y

180 km/h (112 mph)

190 km/h (118 mph)

210 km/h (130 mph)

240 km/h (149 mph)

270 km/h (168 mph)

300 km/h (186 mph)

P195/65R15 94H

Example wheel size designation:

6.0JX15

P - Applicable vehicle type (tires

marked with the prefix “P’’ are

intended for use on passenger

cars or light trucks; however, not

all tires have this marking).

6.0 - Rim width in inches.

J - Rim contour designation.

15 - Rim diameter in inches.

195 - Tire width in millimeters.

65 - Aspect ratio. The tire’s chapter

height as a percentage of its

width.

R - Tire construction code (Radial).

15 - Rim diameter in inches.

1.(#

3. Checking tire life (TIN : Tire

Identification Number)

4. Tire ply composition and materi-

al

WARNING

Any tires that are over 6 years old,

based on the manufacturing date,

(including the spare tire) should be

replaced by new ones. You can find

the manufacturing date on the tire

sidewall (possibly on the inside of the

wheel), displaying the DOT Code.

The DOT Code is a series of num-

bers on a tire consisting of numbers

and English letters. The manufactur-

ing date is designated by the last four

digits (characters) of the DOT code.

The number of layers or plies of rub-

ber-coated fabric in the tire. Tire

manufacturers also must indicate the

materials in the tire, which include

steel, nylon, polyester, and others.

The letter "R" means radial ply con-

struction; the letter "D" means diago-

nal or bias ply construction; and the

letter "B" means belted-bias ply con-

struction.

Tire age

Tires degrade over time, even

when they are not being used.

Regardless of the remaining

tread, it is recommended that tires

generally be replaced after six (6)

years of normal service. Heat

caused by hot climates or frequent

high loading conditions can accel-

erate the aging process. Failure

to follow this warning could cause

sudden tire failure, which could

lead to a loss of control and an

accident involving serious injury or

death.

5. Maximum permissible inflation

pressure

DOT : XXXX XXXX OOOO

This number is the greatest amount

of air pressure that should be put in

the tire. Do not exceed the maximum

permissible inflation pressure. Refer

to the Tire and Loading Information

label for recommended inflation

pressure.

The front part of the DOT means a

plant code number, tire size and

tread pattern and the last four num-

bers indicate week and year manu-

factured.

For example:

DOT XXXX XXXX 1618 represents

that the tire was produced in the 16th

week of 2018.

1.($

,204/3424-3

Tread wear

Traction - AA, A, B & C

6. Maximum load rating

The tread wear grade is a compara- The traction grades, from highest to

tive rating based on the wear rate of lowest, are AA, A, B and C. Those

the tire when tested under controlled grades represent the tire’s ability to

conditions on a specified govern- stop on wet pavement measured

ment test course. For example, a tire under controlled conditions on spec-

graded 150 would wear one-and-a- ified government test surfaces of

half times (1½) as well on the gov- asphalt and concrete. A tire marked

ernment course as a tire graded 100. C may have poor traction perform-

This number indicates the maximum

load in kilograms and pounds that

can be carried by the tire. When

replacing the tires on the vehicle,

always use a tire that has the same

load rating as the factory installed

tire.

ance.

The relative performance of tires

depends upon the actual conditions

7. Uniform tire quality grading

Quality grades can be found where

applicable on the tire sidewall

between tread shoulder and maxi-

mum chapter width.

of their use, however, and may

depart significantly from the norm

WARNING

due to variations in driving habits,

service practices and differences in

road characteristics and climate.

These grades are molded on the

side-walls of passenger vehicle tires.

The tires available as standard or

optional equipment on your vehicle

may vary with respect to grade.

The traction grade assigned to this

tire is based on straight-ahead

braking traction tests, and does

not include acceleration, corner-

ing, hydroplaning, or peak traction

characteristics.

For example:

TREAD wear 200

TRACTION AA

TEMPERATURE A

1.('

Temperature -A, B & C

Low aspect ratio tire

(if equipped)

WARNING

The temperature grades are A (the

highest), B, and C, representing the

tire’s resistance to the generation of

heat and its ability to dissipate heat

when tested under controlled condi-

tions on a specified indoor laboratory

test wheel.

Sustained high temperature can

cause the material of the tire to

degenerate and reduce tire life, and

excessive temperature can lead to

sudden tire failure. Grades B and A

represent higher levels of perform-

ance on the laboratory test wheel

than the minimum required by law.

Low aspect ratio tires, whose aspect

ratio is lower than 50, are provided

for sporty looks.

Because the low aspect ratio tires

are optimized for handling and brak-

ing, it may be more uncomfortable to

ride in and there is more noise com-

pare with normal tires.

Tire temperature

The temperature grade for this tire

is established for a tire that is

properly inflated and not over-

loaded. Excessive speed, under-

inflation, or excessive loading,

either separately or in combina-

tion, can cause heat build-up and

sudden tire failure. This can cause

loss of vehicle control and serious

injury or death.

1.(1

,204/3424-3

NOTICE

Because the sidewall of the low • It is not easy to recognize the tire

aspect ratio tire is shorter than the

normal, the wheel and tire of the low

aspect ratio tire is easier to be dam-

aged. So, follow the instructions

below.

- When driving on a rough road or

off road, drive cautiously because

tires and wheels may be damaged.

And after driving, inspect tires and • If the tire is damaged by driving on

wheels.

- When passing over a pothole,

speed bump, manhole, or curb

damage with your own eyes. But if

there is the slightest hint of tire

damage, even though you cannot

see the tire damage with your own

eyes, have the tire checked or

replaced because the tire damage

may cause air leakage from the

tire.

a rough road, off road, pothole,

manhole, or curb stone, it will not

be covered by the warranty.

stone, drive slowly so that the tires • You can find out the tire informa-

and wheels are not damaged.

tion on the tire sidewall.

- If the tire is impacted, we recom-

mend that you inspect the tire con-

dition or contact an authorized

HYUNDAI dealer.

- To prevent damage to the tire,

inspect the tire condition and pres-

sure every 3,000km.

1.#ꢌ

ꢖꢓꢎ$ꢎ

■ Blade type

A vehicle’s electrical system is pro-

tected from electrical overload dam-

age by fuses.

WARNING

Fuse replacement

This vehicle has 2 fuse panels, one

located in the driver’s side panel bol-

ster, the other in the engine compart-

ment near the battery.

• Never replace a fuse with any-

thing but another fuse of the

same rating.

Blown

Normal

■ Slow Blow type

If any of your vehicle’s lights, acces-

sories, or controls do not work, check

the appropriate circuit fuse. If a fuse

has blown, the element inside the

fuse will be melted.

If the electrical system does not

work, first check the driver’s side

fuse panel.

• A higher capacity fuse could

cause damage and possibly a

fire.

• Never install a wire or aluminum

foil instead of the proper fuse -

even as a temporary repair. It

may cause extensive wiring

damage and a possible fire.

Blown

Normal

■ Multi fuse

Before replacing a blown fuse, dis-

connect the negative battery cable.

Blown

Always replace a blown fuse with

one of the same rating.

If the replacement fuse blows, this

indicates an electrical problem. Avoid

using the system involved and imme-

diately consult an authorized

HYUNDAI dealer.

NOTICE

Normal

Do not use a screwdriver or any

other metal object to remove fuses

because it may cause a short circuit

and damage the system.

OTA070039

i

Information

Three kinds of fuses are used: blade

type for lower amperage rating, slow

blow type and multi fuse for higher

amperage ratings.

The actual fuse/relay panel label may

differ from equipped items.

NOTICE

1.#&

,204/3424-3

• When replacing a blown fuse or (Continued)

relay with a new one, make sure

Instrument panel fuse replace-

ment

• Check the blown fuse with the fuse

the new fuse or relay fits tightly into

the clips. The incomplete fastening

fuse or relay may cause the vehi-

cle wiring and electric systems

damage and a possible fire.

information on the fuse box cover.

• Replace the blown fuse on the

same place after turning off the

ignition switch and all electric

switches and disconnecting the

negative battery cable.

• Do not remove fuses, relays and

terminals fastened with bolts or

nuts. The fuses, relays and termi-

nals may be fastened incomplete-

ly, and it may cause a possible fire.

If fuses, relays and terminals fas-

tened with bolts or nuts are blown,

consult an authorized HYUNDAI

dealer.

OIB074028

1. Turn the ignition switch and all

other switches off.

2. Open the fuse panel cover.

• Do not input any other objects

except fuses or relays into

fuse/relay terminals such as a driv-

er or wiring. It may cause contact

failure and system malfunction.

(Continued)

1.#%

5. Push in a new fuse of the same

rating, and make sure it fits tightly

in the clips.

Memory fuse

If it fits loosely, we recommend that

you consult an authorized HYUNDAI

dealer.

If you do not have a spare, use a

fuse of the same rating from a circuit

you may not need for operating the

vehicle, such as the cigarette lighter

fuse.

OIB074029

If the electrical components do not

work and the fuses are OK, check

the fuse panel in the engine com-

partment. If a fuse is blown, it must

be replaced.

3. Pull the suspected fuse straight

out. Use the fuse puller provided in

the engine compartment fuse

panel.

4. Check the removed fuse; replace it

if it is blown.

OIB074030

Your vehicle is equipped with the

memory fuse to prevent battery dis-

charge if your vehicle is parked with-

out being operated for prolonged

periods. Use the following proce-

dures before parking the vehicle for

prolonged periods.

1. Turn off the engine.

2. Turn off the headlights and tail

lights.

3. Open the driver's side panel cover

and pull up the memory fuse.

1.#+

,204/3424-3

Engine compartment panel fuse

replacement

NOTICE

i

Information

After checking the fuse panel in the

engine compartment, securely install

the fuse panel cover. If not, electrical

failures may occur from water leak-

ing in.

• If the memory fuse is pulled up from

the fuse panel, the warning chime,

audio, clock and interior lamps, etc.,

will not operate. Some items must

be reset after replacement. Refer to

"Battery" in this chapter.

• Even though the memory fuse is

pulled up, the battery can still be

discharged by operation of the

headlights or other electrical

devices.

OIB074031

1. Turn the ignition switch and all

other switches off.

2. Remove the fuse box cover by

pressing the tab and pulling up the

cover.

3. Check the removed fuse; replace it

if it is blown. To remove or insert

the fuse, use the fuse puller in the

engine compartment fuse panel.

4. Push in a new fuse of the same

rating, and make sure it fits tightly

in the clips. If it fits loosely, we rec-

ommend that you consult an

authorized HYUNDAI dealer.

1.#)

3. Replace the fuse with a new one

of the same rating.

Main fuse (Multi fuse)

4. Reinstall in the reverse order of

removal.

CAUTION

If the main fuse is not assembled

properly, it may cause fire.

If the main fuse is blown, we rec-

ommend that you consult an

authorized HYUNDAI dealer.

OIB074031

OIB074032

If the main fuse is blown, it must be

removed as follows:

1. Disconnect the negative battery

cable.

2. Remove the nuts shown in the pic-

ture above.

1.#(

,204/3424-3

Fuse/relay panel description

Inner fuse panel

OIB074033

Inside the fuse/relay panel covers,

you can find the fuse/relay label

describing fuse/relay name and

capacity.

i

Information

Not all fuse panel descriptions in this

manual may be applicable to your

vehicle. It is accurate at the time of

printing. When you inspect the fuse

panel in your vehicle, refer to the fuse

panel label

OIB077044

1.##

Driver’s side fuse panel

Fuse Name

SAFETY P/WDW

P/WDW LH

Symbol

Fuse rating

25A

Circuit Protected

Driver Safety Power Window Module

25A

Power Window Main Switch, Passenger Power Window Switch (RHD)

PCM/ECM, A/C Control Module, Driver/Passenger Power Outside Mirror

Front Fog Lamp Relay

HTD MIRR

10A

FOG LP FRT

RR HTD

10A

30A

RR HTD Relay

P/WDW RH

25A

Driver Power Window Switch

STOP

LAMP

STOP LAMP

POWER OUTLET LH

DR LOCK

15A

Stop Signal Electronic Module

20A

Power Outlet LH & USB Charger

20A

T/Gate Unlock Relay, Door Lock/Unlock Relay

A/CON Fuse for Clutch+Condition

Power Outlet RH

A/CON 2

10A

POWER OUTLET RH

BLOWER

20A

10A

A/C Control Module, Blower Motor

Power Outside Mirror Switch, Auido, Digital Clock, BCM, Smart Key Control Module,

I/P Junction Block (P/OUTLET Relay)

ACC

10A

CVT : Transaxle Range Switch,

START

TURN

10A

15A

M/T : PCM/ECM, E/R Junction Block (Start Relay), Ignition Lock Switch,

Smart Key Control Module, Clutch Switch

BCM

1.#$

,204/3424-3

Driver’s side fuse panel

Fuse Name

SENSOR

Symbol

Fuse rating

10A

Circuit Protected

Diesel 1.4 : Fuel Filter Warning Sensor

A/C Control Module, E/R Junction Block (Multipurpose Check Connector), ATM Shift

Lever ILL., Center Facia Switch, Audio

MODULE3

10A

PDM1

PDM2

25A

10A

Smart Key Control Module

Smart Key Control Module, Start/Stop Button Switch

Parking Distance Warning Buzzer, Parking Distance Warning-Reverse LH/RH, Parking

Distance Warning-Reverse (CENTER) LH/RH

MODULE2

TCU

10A

15A

10A

CVT : Transaxle Range Switch, Pulse Generator 'A' / 'B',

M/T : Vehicle Speed Sensor, I/P Junction Block (Fuse - F26)

RH

LH

Rear Combination Lamp (In/Out) RH, Head Lamp RH, ILL. (+), License Lamp (4DR),

License Lamp LH/RH (5DR)

TAIL LP RH

TAIL LP LH

RR WIPER

ABS

10A

15A

10A

Rear Combination Lamp (In/Out) LH, Head Lamp LH, License Lamp

Rear Wiper Motor, PCB Block (Rear Wiper Relay)

ABS Control Module

A/BAG

SRS Control Module

ECU

PCM/ECM, Smart Key Control Module

Stop Lamp Switch, Smart Key Control Module

Instrument Cluster

BRAKE SWITCH

CLUSTER

1.#'

Driver’s side fuse panel

Fuse Name

MDPS

Symbol

Fuse rating

10A

Circuit Protected

1

MDPS Unit

MODULE1

MODULE 4

A/CON 1

WASHER

10A

BCM, Sport Mode Switch, Stop Lamp Switch

BCM, Smart Key Control Module

10A

1

10A

PCB Block (Blower Relay), A/C Control Module, Cluster Ionizer (Auto A/C)

Multifunction Switch

A/C

15A

Head Lamp Leveling Device Switch, Head Lamp Leveling Device Actuator LH/RH,

BCM, PCB Block (H/Lamp HI Relay)

MODULE 5

10A

A/BAG IND

AUDIO

10A

20A

Instrument Cluster

Audio

Luggage Lamp, Room Lamp, BCM, Hazard Switch & Door Lock Switch, Map Lamp,

Center Room Lamp, Data Link Connector, Digital Clock, Instrument Cluster,

A/C Control Module

ROOM LP

10A

1.#1

,204/3424-3

Engine compartment fuse panel

OIB074031

OIB075065

1.$ꢌ

Engine compartment main fuse panel

Fuse Name

MDPS

Symbol

Fuse rating

80A

Circuit Protected

1

MDPS Unit

Multi Fuse

[125A]

(150A)

ALT

Alternator, Fuse - F8 / F9 / F10 / F11

ECU 4

B+3

[15A]

30A

ECM/PCM

I/P Junction Block (Power Connector (Fuse - F45, F46), Fuse - F5, F9, F34)

W/O Button Start : Ignition Switch

With Button Start : PDM Relay Box (IG1 / ACC Relay)

IG1

30A

B+1

GLOW

B+5

30A

(80A)

40A

30A

40A

I/P Junction Block (Fuse - F11, F12, F20, F23, F24)

E/R Junction Block (RLY. 1)

Fuse

I/P Junction Block (P/OUTLET Relay)

I/P Junction Block (Fuse - F6)

B+4

ABS

ABS Control Module

ABS Control Module, Multipurpose Check Connector

[ ] : G4LA (Gasoline 1.2)

( ) : D4FC (Diesel 1.4)

1.$&

,204/3424-3

PCB Block (Gasoline engine)

Fuse Name

ECU 1

Symbol

Fuse rating

30A

Circuit Protected

PCB Block (Engine Control Relay, Fuse - F25)

HORN

15A

Horn Relay, B/Alarm Horn Relay

F/Pump Relay

FUEL PUMP

WIPER FRT

DRL

20A

25A

Wiper Lo Relay

(10A)

20A

DRL Relay

H/LAMP LO

H/LAMP HI

C/FAN

H/Lamp Lo Relay

[20A] (10A) H/Lamp Hi Relay

40A

50A

30A

10A

C/Fan Lo Relay, C/Fan Hi Relay

BLOWER

IG 2

Blower Relay

Start Relay, W/O Button Start : Ignition Switch, With Button Start : PDM Relay Box (IG2 Relay)

I/P Junction Block (P/WDW Relay, TAIL Relay, Fuse - F1)

1.2 CVT : PCM

B+2

TCU 1

F/Pump Relay, ECM, C/Fan HI/LO Relay, Camshaft Position Sensor #1/#2, Oxygen Sensor

(Up/Down), Oil Control Valve #1/#2, Purge Control Solenoid Valve, Variable Intake Solenoid

Valve, A/CON Relay, Immobilizer Module

ECU 3

15A

10A

CVT : PCM, Transaxle Range Switch, Instrument Cluster, Audio

M/T : Back-Up Lamp Switch, I/P Junction Block (Fuse - F26)

B/UP

B/UP LAMP

LAMP

[ ] : MFR (Multi Focus Reflector) Headlight

( ) : Bi-Function Projection Headlight

1.$%

PCB Block (Gasoline engine)

Fuse Name

H/LAMP RH

H/LAMP LH

TCU 2

Symbol

Fuse rating

10A

Circuit Protected

Head Lamp RH

10A

Head Lamp LH

15A

1.4 A/T : PCM

ECU 2

15A

ECM/PCM, Injector #1/#2/#3#4

IGN COIL

15A

Ignition Coil #1/#2/#3/#4, Condenser

1.$+

,204/3424-3

PCB Block (Diesel engine)

Fuse Name

ECU 1

Symbol

Fuse rating

30A

Circuit Protected

PCB Block (Engine Control Relay)

Horn Relay, B/Alarm Horn Relay

Wiper Lo Relay

HORN

15A

WIPER FRT

DRL

25A

(10A)

20A

DRL Relay

H/LAMP LO

H/LAMP HI

C/FAN

H/Lamp Lo Relay

[20A] (10A) H/Lamp Hi Relay

50A

30A

10A

C/Fan Lo Relay, C/Fan Hi Relay

Blower Relay

BLOWER

IG 2

Start Relay, W/O Button Start : Ignition Switch, With Button Start : PDM Relay Box (IG2 Relay)

I/P Junction Block (P/WDW Relay, TAIL Relay, Fuse : F1)

Stop Lamp Switch, C/FAN Lo/Hi Relay, A/CON Relay

Back-Up Lamp Switch, I/P Junction Block (Fuse - F26)

Head Lamp RH

B+2

ECU 3

B/UP

B/UP LAMP

H/LAMP RH

H/LAMP LH

LAMP

Head Lamp LH

[ ] : MFR (Multi Focus Reflector) Headlight

( ) : Bi-Function Projection Headlight

1.$)

PCB Block (Diesel engine)

Fuse Name

ECU 4

Symbol

Fuse rating

20A

Circuit Protected

ECM

E/R Junction Block (RLY. 1), Electrical EGR Control Valve, Mass Air Flow Sensor,

WGT Control Solenoid Valve, Camshaft Position Sensor, Immobilizer Module

ECU 2

ECU 5

15A

10A

Fuel Pressure Regulator Valve

1.$(

,204/3424-3

ꢔ!ꢈꢑꢍ#ꢘꢓꢔꢘꢎ

Consult an authorized HYUNDAI

dealer to replace most vehicle light

bulbs. It is difficult to replace vehicle

light bulbs because other parts of the

vehicle must be removed before you

can get to the bulb. This is especially

true for removing the headlight

assembly to get to the bulb(s).

i

Information

WARNING

After heavy driving, rain or washing

headlight and taillight lenses could

appear frosty. This condition is caused

by the temperature difference

between the lamp inside and outside.

This is similar to the condensation on

your windows inside your vehicle dur-

ing the rain and doesn’t indicate a

problem with your vehicle. If the

water leaks into the lamp bulb circuit-

ry, we recommend that the system be

checked by an authorized HYUNDAI

dealer.

Prior to replacing a light, depress

the foot brake, move the shift lever

into the P (Park, for Continuously

Variable Transaxle vehicle) or

neutral (for Manual Transaxle

vehicle), apply the parking brake,

place the ignition switch in the

LOCK/OFF position, and take the

key with you when leaving the

vehicle to avoid sudden move-

ment of the vehicle and to prevent

possible electric shock.

Removing/installing the headlight

assembly can result in damage to

the vehicle.

Be aware the bulbs may be hot

and may burn your fingers.

Be sure to replace the burned-out

bulb with one of the same wattage

rating. Otherwise, it may cause dam-

age to the fuse or electric wiring sys-

tem.

1.$#

■ 5 Door

• Type B

■ Cross

• Type A

Headlight, Parking (Position)

Light, Turn signal Light, Low

Beam Assist-Static Light, Fog

Light and Daytime Running Light

bulb replacement

■ 5 Door

• Type A

OIB077069

OIB077070

(1) Headlight (Low/High) *²

(2) Low Beam Assist-Static Light

(3) Front Turn Signal Light

(1) Headlight (Low/High) *¹

(2) Parking (Position) Light

(3) Front Turn signal Light

(4) Position Light/

(4) Front Fog Light (if equipped)

OIB077068

Daytime Running Light (DRL)

(1) Headlight (Low/High) *¹

(2) Parking (Position) Light

(3) Front Turn signal Light

*¹: MFR (Multi Focus Reflector)

Headlight

(5) Front Fog Light (if equipped)

*²: Bi-Function Projection Headlight

(4) Daytime Running Light

(if equipped)

(5) Front Fog Light (if equipped)

*¹: MFR (Multi Focus Reflector)

Headlight

1.$$

,204/3424-3

■ Cross

• Type B

(Continued)

• Always handle them carefully,

and avoid scratches and abra-

sions. If the bulbs are lit, avoid

contact with liquids. Never touch

the glass with bare hands.

Residual oil may cause the bulb

to overheat and burst when lit. A

bulb should be operated only

when installed in a headlight.

• If a bulb becomes damaged or

cracked, replace it immediately

and carefully dispose of it.

• Wear eye protection when

changing a bulb. Allow the bulb

to cool down before handling it.

OIB077060

OLMB073042L

(1) Headlight (Low/High) *²

WARNING

(2) Low Beam Assist-Static Light

(3) Front Turn Signal Light

Halogen bulbs

(4) Position Light/

• Halogen bulbs contain pressur-

ized gas that will produce flying

pieces of glass if broken.

Daytime Running Light (DRL)

(5) Front Fog Light (if equipped)

(Continued)

*²: Bi-Function Projection Headlight

i

Information

• If the headlight aiming adjustment

is necessary after the headlight

assembly is reinstalled, consult an

authorized HYUNDAI dealer.

• The Fog Light aiming adjustment

can be done by removing UNDER

COVER. Consult an authorised

HYUNDAI dealer.

1.$'

4. Unsnap the headlight bulb retain-

ing wire by depressing the end

and pushing it upward.

5. Remove the bulb from the head-

light assembly.

6. Install a new headlight bulb and

snap the headlight bulb retaining

wire into position by aligning the

wire with the groove on the bulb.

7. Connect the headlight bulb socket

connector.

Headlight (Low/High)

Turn signal light

1. Remove the turn signal light bulb

cover by turning it counterclock-

wise.

2. Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on

the assembly.

3. Insert a new bulb by inserting it

into the socket and rotating it until

it locks into place.

4. Install the socket in the assembly

by aligning the tabs on the socket

with the slots in the assembly.

Push the socket into the assembly

and turn the socket clockwise.

■ MFR (Multi Focus Reflector) Headlight

Headlight

Parking

(Position) light

Turn signal light

OIB074048

Headlight

8. Install the headlight bulb cover by

turning it clockwise.

■ Bi-Function Projection Headlight

i

Information

- Bi-Function projection

headlight

5. Install the turn signal light bulb

cover by turning it clockwise.

This headlight is bi-function type that

switches the low beam to high or the

high beam to low using solenoid sys-

tem. So, the moving sound may be

heard when the headlight switches the

low beam to high or the high beam to

low and it does not indicate malfunc-

tion of the headlight.

Turn signal light

OIB075061

1. Open the hood.

2. Remove the headlight bulb cover

by turning it counterclockwise.

3. Disconnect the headlight bulb

socket-connector.

1.$1

,204/3424-3

6. Install a new Low Beam Assist-

Static Light bulb and snap the Low

Beam Assist-Static Light bulb

retaining wire into position by

aligning the wire with the groove

on the bulb.

Low Beam Assist-Static Light

Front fog light or Daytime running

light (if equipped)

■ 5 Door

• Type A (with DRL)

7. Connect the Low Beam Assist-

Static Light bulb socket connector.

8. Install the Low Beam Assist-Static

Light bulb cover by turning it clock-

wise.

OIB077071

Low Beam Assist-Static Light

■ 5 Door

OIB075061

• Type A (without DRL)

Parking (Position) light

1. Open the hood.

1. Remove the socket from the

assembly by pulling it straight out.

2. Remove the bulb from the socket

by pulling it out.

2. Remove the Low Beam Assist-

Static Light bulb cover by turning it

counterclockwise.

3. Disconnect the Low Beam Assist-

Static Light bulb socket-connector.

4. Unsnap the Low Beam Assist-

Static Light bulb retaining wire by

depressing the end and pushing it

upward.

3. Insert a new bulb by inserting it

into the socket.

4. Install the socket in the assembly

by pushing it in.

OIB077072

■ Cross

5. Remove the bulb from the Low

Beam Assist-Static Light assem-

bly.

OIB077073

1.'ꢌ

1. Remove the under cover by rotat-

ing the screws and bolts.

Position light/Daytime running light

(if equipped)

Side repeater light (LED)

replacement (if equipped)

2. Reach your hand into the back of

the front bumper.

3. Disconnect the power connector

from the socket.

4. Remove the bulb-socket from the

housing by turning the socket

counterclockwise until the tabs on

the socket align with the slots on

the housing.

Your vehicle is equipped with LED

lamps. LED lamps do not have

replaceable bulbs. If the LED lamp

does not operate, we recommend

that the vehicle be checked by an

authorized HYUNDAI dealer.

5. Install the new bulb-socket into the

housing by aligning the tabs on

the socket with the slots in the

housing. Push the socket into the

housing and turn the socket clock-

wise.

OIB074035

If the light does not operte, we rec-

ommend that the vehicle be checked

by an authorized HYUNDAI dealer.

6. Connect the power connector to

the socket.

7. Reinstall the front bumper under

cover.

1.'&

,204/3424-3

■ Cross

2. Remove the bulb by pulling it

straight out.

Interior light bulb replacement

■ Room lamp

3. Install a new bulb in the socket.

4. Align the lens tabs with the interior

light housing notches and snap

the lens into place.

NOTICE

Be careful not to dirty or damage

lens, lens tab, and plastic housings.

OIB074040

1. Using a flat-blade screwdriver,

remove the light assembly from

the body of the vehicle by prying

the housing and pulling the

assembly out.

OIB074041

■ Luggage room lamp

2. Separate the socket and the lens

part by turning the socket counter-

clockwise until the tabs on the

socket align with the slots on the

lens part.

3. Remove the bulb by pulling it

straight out.

4. Insert a new bulb in the socket.

OIB074042

1. Using a flat-blade screwdriver,

gently pry the lens from the interi-

or light housing.

5. Reassemble the socket and the

housing part.

6. Reinstall the light assembly to the

body of the vehicle.

1.')

ꢋꢋ$ ꢌ "ꢉ$#ꢉ ꢌ$

Exterior care

Finish maintenance

Washing

NOTICE

Exterior general caution

• Do not use strong soap, chemical

detergents or hot water, and do not

wash the vehicle in direct sunlight

or when the body of the vehicle is

warm.

• Be careful when washing the side

windows of your vehicle.

To help protect your vehicle’s finish

from rust and deterioration, wash it

thoroughly and frequently at least

once a month with lukewarm or cold

water.

If you use your vehicle for off-road

driving, you should wash it after each

off-road trip. Pay special attention to

the removal of any accumulation of

salt, dirt, mud, and other foreign

materials. Make sure the drain holes

in the lower edges of the doors and

rocker panels are kept clear and

clean.

It is very important to follow the label

directions when using any chemical

cleaner or polish. Read all warning

and caution statements that appear

on the label.

Especially, with high-pressure

water, water may leak through the

windows and wet the interior.

High-pressure washing

• When using high-pressure washers,

make sure to maintain sufficient dis-

tance from the vehicle.

• To prevent damage to the plastic

parts and lamps, do not clean with

chemical solvents or strong deter-

gents.

Insufficient clearance or excessive

pressure can lead to component

damage or water penetration.

Insects, tar, tree sap, bird droppings,

industrial pollution and similar

deposits can damage your vehicle’s

finish if not removed immediately.

Even prompt washing with plain

water may not completely remove all

these deposits. A mild soap, safe for

use on painted surfaces, may be

used.

After washing, rinse the vehicle thor-

oughly with lukewarm or cold water.

Do not allow soap to dry on the fin-

ish.

• Do not spray the camera, sensors or

its surrounding area directly with a

high pressure washer. Shock applied

from high pressure water may cause

the device to not operate normally.

• Do not bring the nozzle tip close to

boots (rubber or plastic covers) or

connectors as they may be damaged

if they come into contact with high

pressure water.

WARNING

Wet brakes

After washing the vehicle, test the

brakes while driving slowly to see

if they have been affected by

water. If braking performance is

impaired, dry the brakes by apply-

ing them lightly while maintaining

a slow forward speed.

1.'(

,204/3424-3

Waxing

Finish damage repair

Wax the vehicle when water will no

longer bead on the paint.

Deep scratches or stone chips in the

painted surface must be repaired

promptly. Exposed metal will quickly

rust and may develop into a major

repair expense.

Always wash and dry the vehicle

before waxing. Use a good quality

liquid or paste wax, and follow the

manufacturer’s instructions. Wax all

metal trim to protect it and to main-

tain its luster.

Removing oil, tar, and similar materi-

als with a spot remover will usually

strip the wax from the finish. Be sure to

re-wax these areas even if the rest of

the vehicle does not yet need waxing.

i

Information

If your vehicle is damaged and

requires any metal repair or replace-

ment, be sure the body shop applies

anti-corrosion materials to the parts

repaired or replaced.

OLMB073082

NOTICE

• Water washing in the engine com-

partment including high pressure

water washing may cause the fail-

ure of electrical circuits located in

the engine compartment.

NOTICE

• Wiping dust or dirt off the body with

a dry cloth will scratch the finish.

• Never allow water or other liquids

• Do not use steel wool, abrasive

cleaners, or strong detergents con-

taining highly alkaline or caustic

agents on chrome-plated or

anodized aluminum parts. This

may result in damage to the pro-

tective coating and cause discol-

oration or paint deterioration.

to

come in

contact with

electrical/electronic components

inside the vehicle as this may dam-

age them.

1.'#

Bright-metal maintenance

Underbody maintenance

WARNING

• To remove road tar and insects, Corrosive materials used for ice and

use a tar remover, not a scraper or snow removal and dust control may

After washing the vehicle, test the

brakes while driving slowly to see

if they have been affected by

water. If braking performance is

impaired, dry the brakes by apply-

ing them lightly while maintaining

a slow forward speed.

other sharp object.

collect on the underbody. If these

materials are not removed, acceler-

ated rusting can occur on the under-

body parts such as the fuel lines,

frame, floor pan and exhaust system,

even though they have been treated

with rust protection.

Thoroughly flush the vehicle under-

body and wheel openings with luke-

warm or cold water once a month,

after off-road driving and at the end

of each winter. Pay special attention

to these areas because it is difficult

to see all the mud and dirt. It will do

more harm than good to wet down

the road grime without removing it.

The lower edges of the doors, rocker

panels, and frame members have

drain holes that should not clog with

dirt; trapped water in these areas can

cause rusting.

• To protect the surfaces of bright-

metal parts from corrosion, apply a

coating of wax or chrome preser-

vative and rub to a high luster.

• During winter weather or in coastal

areas, cover the bright metal parts

with a heavier coating of wax or

preservative. If necessary, coat the

parts with non-corrosive petroleum

jelly or other protective compound.

1.'$

,204/3424-3

High-corrosion areas

Aluminum wheel maintenance

Corrosion protection

If you live in an area where your vehi-

cle is regularly exposed to corrosive

materials, corrosion protection is

particularly important. Some of the

common causes of accelerated cor-

rosion are road salts, dust control

chemicals, ocean air and industrial

pollution.

The aluminum wheels are coated Protecting your vehicle from corro-

with a clear protective finish. sion

• Do not use any abrasive cleaner, By using the most advanced design

polishing compound, solvent, or and construction practices to combat

wire brushes on aluminum wheels. corrosion, we produce vehicles of

They may scratch or damage the the highest quality. However, this is

finish.

only part of the job. To achieve the

long-term corrosion resistance your

vehicle can deliver, the owner's

cooperation and assistance is also

required.

• Clean the wheel when it has

cooled.

• Use only a mild soap or neutral

detergent, and rinse thoroughly

with water. Also, be sure to clean

the wheels after driving on salted Common causes of corrosion

roads. This helps prevent corro-

sion.

The most common causes of corro-

sion on your vehicle are:

• Avoid washing the wheels with

• Road salt, dirt and moisture that is

high-speed car wash brushes.

allowed to accumulate underneath

• Do not use any alkaline or acid

detergent. It may damage and cor-

rode the aluminum wheels coated

with a clear protective finish.

the vehicle.

• Removal of paint or protective

coatings by stones, gravel, abra-

sion or minor scrapes and dents

which leave unprotected metal

exposed to corrosion.

1.''

Moisture breeds corrosion

To help prevent corrosion

• When cleaning underneath the

vehicle, give particular attention to

the components under the fenders

and other areas that are hidden

from view. Do a thorough job; just

dampening the accumulated mud

rather than washing it away will

accelerate corrosion rather than

prevent it. Water under high pres-

sure and steam are particularly

effective in removing accumulated

mud and corrosive materials.

• When cleaning lower door panels,

rocker panels and frame members,

be sure that drain holes are kept

open so that moisture can escape

and not be trapped inside to accel-

erate corrosion.

Moisture creates the conditions in You can help prevent corrosion from

which corrosion is most likely to getting started by observing the fol-

occur. For example, corrosion is lowing:

accelerated by high humidity, partic-

ularly when temperatures are just

Keep your vehicle clean

above freezing. In such conditions,

The best way to prevent corrosion is

to keep your vehicle clean and free

of corrosive materials. Attention to

the underside of the vehicle is partic-

ularly important.

the corrosive material is kept in con-

tact with the vehicle’s surface by

moisture that slowly evaporates.

Mud is particularly corrosive

because it dries slowly and holds

moisture in contact with the vehicle.

Although the mud appears to be dry,

it can still retain moisture and pro-

mote corrosion.

High temperatures can also acceler-

ate corrosion of parts that are not

properly ventilated so the moisture

can be dispersed. For all these rea-

sons, it is particularly important to

keep your vehicle clean and free of

mud or accumulations of other mate-

rials. This applies not only to the vis-

ible surfaces but particularly to the

underside of the vehicle.

• If you live in a high-corrosion area

— where road salts are used, near

the ocean, areas with industrial

pollution, acid rain, etc.—, you

should take extra care to prevent

corrosion. In winter, hose off the

underside of your vehicle at least

once a month and be sure to clean

the underside thoroughly when

winter is over.

1.'1

,204/3424-3

Keep your garage dry

Don't neglect the interior

Interior care

Don't park your vehicle in a damp, Moisture can collect under the floor

poorly ventilated garage. This cre- mats and carpeting and cause corro-

ates a favorable environment for cor- sion. Check under the mats periodi-

rosion. This is particularly true if you cally to be sure the carpeting is dry.

wash your vehicle in the garage or Use particular care if you carry fertil-

drive it into the garage when it is still izers, cleaning materials or chemi-

wet or covered with snow, ice or cals in the vehicle.

Interior general precautions

Prevent chemicals such as perfume,

cosmetic oil, sun cream, hand clean-

er, and air freshener from contacting

the interior parts because they may

cause damage or discoloration. If

they do contact the interior parts,

wipe them off immediately. See the

instructions that follow for the proper

way to clean vinyl.

mud. Even a heated garage can con-

These should be carried only in

tribute to corrosion unless it is well

proper containers and any spills or

ventilated so moisture is dispersed.

leaks should be cleaned up, flushed

with clean water and thoroughly

dried.

Keep paint and trim in good condi-

tion

NOTICE

Never allow water or other liquids to

come in contact with electrical/ elec-

tronic components inside the vehicle

as this may damage them.

Scratches or chips in the finish

should be covered with "touch-up"

paint as soon as possible to reduce

the possibility of corrosion. If bare

metal is showing through, the atten-

tion of a qualified body and paint

shop is recommended.

Bird droppings : Bird droppings are

highly corrosive and may damage

painted surfaces in just a few hours.

Always remove bird droppings as

soon as possible.

NOTICE

When cleaning leather products

(steering wheel, seats etc.), use neu-

tral detergents or low alcohol content

solutions. If you use high alcohol

content solutions or acid/alkaline

detergents, the color of the leather

may fade or the surface may get

stripped off.

1.1ꢌ

Leather (if equipped)

Cleaning the upholstery and interi-

or trim

Vinyl (if equipped)

CAUTION

• Feature of Seat Leather

- Leather is made from the outer

skin of an animal, which goes

through a special process to be

available for use. Since it is a nat-

ural object, each part differs in

thickness or density.

Wrinkles may appear as a natural

result of stretching and shrinking

depending on the temperature

and humidity.

- The seat is made of stretchable

fabric to improve comfort.

- The parts contacting the body are

curved and the side supporting

area is high which provides driv-

ing comfort and stability.

• Wrinkles or abrasions which

appear naturally from usage are

not covered by warranty.

• Belts with metallic accessories,

zippers or keys inside the back

pocket may damage the seat

fabric.

• Make sure not to wet the seat. It

may change the nature of natu-

ral leather.

• Jeans or clothes which could

bleach may contaminate the

surface of the seat covering fab-

ric.

Remove dust and loose dirt from

vinyl with a whisk broom or vacuum

cleaner. Clean vinyl surfaces with a

vinyl cleaner.

Fabric (if equipped)

Remove dust and loose dirt from fab-

ric with a whisk broom or vacuum

cleaner. Clean with a mild soap solu-

tion recommended for upholstery or

carpets. Remove fresh spots imme-

diately with a fabric spot cleaner. If

fresh spots do not receive immediate

attention, the fabric can be stained

and its color can be affected. Also, its

fire-resistant properties can be

reduced if the material is not proper-

ly maintained.

- Wrinkles may appear naturally

from usage. It is not a fault of the

products.

NOTICE

Using anything but recommended

cleaners and procedures may affect

the fabric’s appearance and fire-

resistant properties.

1.1&

,204/3424-3

• Caring for the leather seats

• Cleaning the leather seats

Cleaning the lap/shoulder belt

webbing

- Vacuum the seat periodically to

remove dust and sand on the seat.

It will prevent abrasion or damage

of the leather and maintain its qual-

ity.

- Wipe the natural leather seat cover

often with dry or soft cloth.

- Use of proper leather protective

may prevent abrasion of the cover

and helps maintain the color. Be

sure to read the instructions and

consult a specialist when using

leather coating or protective agent.

- Light colored (beige, cream beige)

leather is easily contaminated and

the stain is noticeable. Clean the

seats frequently.

- Remove all contaminations instant-

ly. Refer to instructions below for

removal of each contaminant.

- Cosmetic products (sunscreen,

foundation, etc.)

Apply cleansing cream on a cloth

and wipe the contaminate spot.

Wipe off the cream with a wet cloth

and remove water with a dry cloth.

Clean the belt webbing with any mild

soap solution recommended for

cleaning upholstery or carpet. Follow

the instructions provided with the

soap. Do not bleach or re-dye the

webbing because this may weaken it.

Cleaning the interior window glass

- Beverages (coffee, soft drink, etc.)

If the interior glass surfaces of the

vehicle become fogged (that is, cov-

ered with an oily, greasy or waxy

film), they should be cleaned with

glass cleaner. Follow the directions

on the glass cleaner container.

Apply a small amount of neutral

detergent and wipe until contami-

nations do not smear.

- Oil

Remove oil instantly with

absorbable cloth and wipe with

stain remover used only for natu-

ral leather.

- Chewing gum

Harden the gum with ice and

remove gradually.

NOTICE

- Avoid wiping with wet cloth. It may

cause the surface to crack.

Do not scrape or scratch the inside

of the rear window. This may result

in damage to the rear window

defroster grid.

1.1%

$ꢁ!ꢎꢎ!ꢊ"#ꢉꢊ"ꢍꢌꢊꢔ#ꢎꢜꢎꢍ$ꢁ

The emission control system of your

vehicle is covered by a written limited

warranty. Please see the warranty

information contained in the Service

Passport in your vehicle.

1. Crankcase emission control

system

2. Evaporative emission control

system

The positive crankcase ventilation The Evaporative Emission Control

system is employed to prevent air System is designed to prevent fuel

pollution caused by blow-by gases vapors from escaping into the atmos-

being emitted from the crankcase. phere.

Your vehicle is equipped with an

emission control system to meet all

emission regulations.

There are three emission control

systems which are as follows.

This system supplies fresh filtered air

to the crankcase through the air

Canister

intake hose. Inside the crankcase,

Fuel vapors generated inside the fuel

the fresh air mixes with blow-by

tank are absorbed and stored in the

gases, which then pass through the

onboard canister.When the engine is

PCV valve into the induction system.

(1) Crankcase emission control sys-

tem

(2) Evaporative emission control sys-

tem

running, the fuel vapors absorbed in

the canister are drawn into the surge

tank through the purge control sole-

noid valve.

(3) Exhaust emission control system

Purge Control Solenoid Valve

(PCSV)

In order to assure the proper function

of the emission control systems, it is

recommended that you have your

car inspected and maintained by an

authorized HYUNDAI dealer in

accordance with the maintenance

schedule in this manual.

The purge control solenoid valve is

controlled by the Engine Control

Module (ECM); when the engine

coolant temperature is low during

idling, the PCSV closes so that evap-

orated fuel is not taken into the

engine. After the engine warms up

during ordinary driving, the PCSV

opens to introduce evaporated fuel to

the engine.

1.1+

,204/3424-3

• Do not operate the engine in con-

fined or closed areas (such as

garages) any more than what is

necessary to move the vehicle in or

out of the area.

• When the vehicle is stopped in an

open area for more than a short

time with the engine running,

adjust the ventilation system (as

needed) to draw outside air into the

vehicle.

• Never sit in a parked or stopped

vehicle for any extended time with

the engine running.

• When the engine stalls or fails to

start, excessive attempts to restart

the engine may cause damage to

the emission control system.

Engine exhaust gas precautions

(carbon monoxide)

3. Exhaust emission control

system

The Exhaust Emission Control

System is a highly effective system

which controls exhaust emissions

while maintaining good vehicle per-

formance.

• Carbon monoxide can be present

with other exhaust fumes.

Therefore, if you smell exhaust

fumes of any kind inside your vehi-

cle, have it inspected and repaired

immediately. If you ever suspect

exhaust fumes are coming into

your vehicle, drive it only with all

the windows fully open. Have your

vehicle checked and repaired

immediately.

Vehicle modifications

• This vehicle should not be modi-

fied. Modification of your vehicle

could affect its performance, safety

or durability and may even violate

governmental safety and emis-

sions regulations.

WARNING

In addition, damage or perform-

ance problems resulting from any

modification may not be covered

under warranty.

Exhaust

Engine exhaust gases contain

carbon monoxide (CO). Though

colorless and odorless, it is dan-

gerous and could be lethal if

inhaled. Follow the instructions on

this page to avoid CO poisoning.

• If you use unauthorized electronic

devices, it may cause the vehicle to

operate abnormally, wire damage,

battery discharge and fire. For your

safety, do not use unauthorized

electronic devices.

1.1)

Your vehicle is equipped with a cat- • Avoid driving with a extremely low

Operating precautions for catalytic

converters (if equipped)

alytic converter emission control

device.

Therefore, the following precautions

must be observed:

• Use only UNLEADED FUEL for

Petrol engine.

• Do not operate the vehicle when

there are signs of engine malfunc-

tion, such as misfire or a noticeable

loss of performance.

fuel level. Running out of fuel could

cause the engine to misfire, dam-

aging the catalytic converter.

WARNING

Failure to observe these precautions

could result in damage to the catalyt-

ic converter and to your vehicle.

Additionally, such actions could void

your warranties.

Fire

• A hot exhaust system can ignite

flammable items under your

vehicle. Do not park, idle, or

drive the vehicle over or near

flammable objects, such as

grass,

vegetation,

paper,

• Do not misuse or abuse the

engine. Examples of misuse are

coasting with the ignition off and

descending steep grades in gear

with the ignition off.

• Do not operate the engine at high

idle speed for extended periods (5

minutes or more).

• Do not modify or tamper with any

part of the engine or emission con-

trol system. All inspections and

adjustments must be made by an

authorized HYUNDAI dealer.

leaves, etc.

• The exhaust system and catalyt-

ic system are very hot while the

engine is running or immediate-

ly after the engine is turned off.

Keep away from the exhaust

system and catalytic, you may

get burned. Also, do not remove

the heat sink around the

exhaust system, do not seal the

bottom of the vehicle or do not

coat the vehicle for corrosion

control. It may present a fire risk

under certain conditions.

1.1(

Maintenance for Your Hyundai I20 4 Door Second Generation (2015-2020)

Related Topics

Popular Owner Manuals

Latest Owner Manuals